no-OS
Variables
common_data.c File Reference

Defines common data to be used by ad719x examples. More...

#include "common_data.h"
Include dependency graph for common_data.c:

Variables

const struct no_os_spi_init_param spi_ip
 
const struct no_os_gpio_init_param miso_ip
 
const struct no_os_gpio_init_param sync_ip
 
struct ad719x_init_param ad7190_dev_ip
 

Detailed Description

Defines common data to be used by ad719x examples.

Author
Andrei Porumb (andre.nosp@m.i.po.nosp@m.rumb@.nosp@m.anal.nosp@m.og.co.nosp@m.m)

Copyright 2022(c) Analog Devices, Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Variable Documentation

◆ ad7190_dev_ip

struct ad719x_init_param ad7190_dev_ip
Initial value:
= {
.spi_init = &spi_ip,
.gpio_miso = &miso_ip,
.sync_pin = NULL,
.current_polarity = 1,
.current_gain = AD719X_ADC_GAIN_64,
.operating_mode = AD719X_MODE_SINGLE,
.data_rate_code = 480U,
.clock_source = AD719X_INT_CLK_4_92_MHZ,
.input_mode = 0,
.buffer = 0,
.bpdsw_mode = 0,
.chip_id = AD7190
}

◆ miso_ip

const struct no_os_gpio_init_param miso_ip
Initial value:
= {
.number = RDY_PIN,
.platform_ops = GPIO_OPS,
.extra = &gpio_extra
}

◆ spi_ip

const struct no_os_spi_init_param spi_ip
Initial value:
= {
.device_id = SPI_DEVICE_ID,
.max_speed_hz = 100000,
.chip_select = 0U,
.platform_ops = SPI_OPS,
.extra = &spi_extra
}

◆ sync_ip

const struct no_os_gpio_init_param sync_ip
Initial value:
= {
.number = SYNC_PIN,
.platform_ops = GPIO_OPS,
.extra = &gpio_extra
}
GPIO_OPS
#define GPIO_OPS
Definition: parameters.h:57
AD719X_MODE_SINGLE
@ AD719X_MODE_SINGLE
Definition: ad719x.h:172
spi_extra
const struct xil_spi_init_param spi_extra
Definition: ad5758_sdz.c:59
spi_ip
const struct no_os_spi_init_param spi_ip
Definition: common_data.c:48
NO_OS_SPI_MODE_3
@ NO_OS_SPI_MODE_3
Definition: no_os_spi.h:72
AD719X_ADC_GAIN_64
@ AD719X_ADC_GAIN_64
Definition: ad719x.h:153
miso_ip
const struct no_os_gpio_init_param miso_ip
Definition: common_data.c:58
SYNC_PIN
#define SYNC_PIN
Definition: parameters.h:61
SPI_OPS
#define SPI_OPS
Definition: parameters.h:56
AD7190
@ AD7190
Definition: ad719x.h:188
gpio_extra
const struct xil_gpio_init_param gpio_extra
Definition: ad5758_sdz.c:73
SPI_DEVICE_ID
#define SPI_DEVICE_ID
Definition: parameters.h:76
NO_OS_SPI_BIT_ORDER_MSB_FIRST
@ NO_OS_SPI_BIT_ORDER_MSB_FIRST
Definition: no_os_spi.h:81
RDY_PIN
#define RDY_PIN
Definition: parameters.h:51
NULL
#define NULL
Definition: wrapper.h:64
AD719X_INT_CLK_4_92_MHZ
@ AD719X_INT_CLK_4_92_MHZ
Definition: ad719x.h:165