Header file of AD74413r Driver. More...

#include "stdint.h"
#include "stdbool.h"
#include "no_os_spi.h"

Include dependency graph for ad74413r.h:

This graph shows which files directly or indirectly include this file:

Classes
struct	ad74413r_init_param
	Initialization parameter for the device descriptor. More...

struct	ad74413r_decimal
	ADC value format. More...

struct	ad74413r_channel_config
	Device channel state. More...

struct	_ad74413r_live_status
	Bitfield struct which maps on the LIVE_STATUS register. More...

union	ad74413r_live_status
	Used to store the live status bit fields. More...

struct	ad74413r_desc
	AD74413r device descriptor. More...

Macros
#define	AD74413R_N_CHANNELS 4

#define	AD74413R_CH_A 0

#define	AD74413R_CH_B 1

#define	AD74413R_CH_C 2

#define	AD74413R_CH_D 3

#define	AD74413R_RSENSE 100

#define	AD74413R_ADC_MAX_VALUE 65535

#define	AD74413R_NOP 0x00

#define	AD74413R_CH_FUNC_SETUP(x) (0x01 + x)

#define	AD74413R_ADC_CONFIG(x) (0x05 + x)

#define	AD74413R_DIN_CONFIG(x) (0x09 + x)

#define	AD74413R_GPO_PARALLEL 0x0D

#define	AD74413R_GPO_CONFIG(x) (0x0E + x)

#define	AD74413R_OUTPUT_CONFIG(x) (0x12 + x)

#define	AD74413R_DAC_CODE(x) (0x16 + x)

#define	AD74413R_DAC_CLR_CODE(x) (0x1A + x)

#define	AD74413R_DAC_ACTIVE(x) (0x1E + x)

#define	AD74413R_DIN_THRESH 0x22

#define	AD74413R_ADC_CONV_CTRL 0x23

#define	AD74413R_DIAG_ASSIGN 0x24

#define	AD74413R_DIN_COMP_OUT 0x25

#define	AD74413R_ADC_RESULT(x) (0x26 + x)

#define	AD74413R_DIAG_RESULT(x) (0x2A + x)

#define	AD74413R_ALERT_STATUS 0x2E

#define	AD74413R_LIVE_STATUS 0x2F

#define	AD74413R_ALERT_MASK 0x3C

#define	AD74413R_DIN_COUNTER(x) (0x3D + x)

#define	AD74413R_READ_SELECT 0x41

#define	AD74413R_THERM_RST 0x43

#define	AD74413R_CMD_KEY 0x44

#define	AD74413R_SCRATCH 0x45

#define	AD74413R_SILICON_REV 0x46

#define	AD74413R_ALERT_STATUS_RESET NO_OS_GENMASK(15, 0)

#define	AD74413R_CMD_KEY_RESET_1 0x15FA

#define	AD74413R_CMD_KEY_RESET_2 0xAF51

#define	AD74413R_CMD_KEY_LDAC 0x953A

#define	AD74413R_CMD_KEY_DAC_CLEAR 0x73D1

#define	AD74413R_SPI_RD_RET_INFO_MASK NO_OS_BIT(8)

#define	AD74413R_ERR_CLR_MASK NO_OS_GENMASK(15, 0)

#define	AD74413R_SPI_CRC_ERR_MASK NO_OS_BIT(13)

#define	AD74413R_CH_FUNC_SETUP_MASK NO_OS_GENMASK(3, 0)

#define	AD74413R_ADC_RANGE_MASK NO_OS_GENMASK(7, 5)

#define	AD74413R_ADC_REJECTION_MASK NO_OS_GENMASK(4, 3)

#define	AD74413R_DEBOUNCE_TIME_MASK NO_OS_GENMASK(4, 0)

#define	AD74413R_DEBOUNCE_MODE_MASK NO_OS_BIT(5)

#define	AD74413R_DIAG_RESULT_MASK NO_OS_GENMASK(15, 0)

#define	AD74413R_REV_ID NO_OS_GENMASK(7, 0)

#define	AD74413R_CH_200K_TO_GND_MASK NO_OS_BIT(2)

#define	AD74413R_GPO_PAR_DATA_MASK(x) NO_OS_BIT(x)

#define	AD74413R_GPO_SELECT_MASK NO_OS_GENMASK(2, 0)

#define	AD74413R_GPO_DATA_MASK NO_OS_BIT(3)

#define	AD74413R_SLEW_EN_MASK NO_OS_GENMASK(7, 6)

#define	AD74413R_SLEW_LIN_STEP_MASK NO_OS_GENMASK(5, 4)

#define	AD74413R_SLEW_LIN_RATE_MASK NO_OS_GENMASK(3, 2)

#define	AD74413R_CLR_EN_MASK NO_OS_BIT(1)

#define	AD74413R_I_LIMIT_MASK NO_OS_BIT(0)

#define	AD74413R_DAC_CODE_MASK NO_OS_GENMASK(12, 0)

#define	AD74413R_CLR_CODE_MASK NO_OS_GENMASK(12, 0)

#define	AD74413R_DAC_ACTIVE_CODE_MASK NO_OS_GENMASK(12, 0)

#define	AD74413R_COMP_THRESH_MASK NO_OS_GENMASK(5, 1)

#define	AD74413R_DIN_THRESH_MODE_MASK NO_OS_BIT(0)

#define	AD74413R_CONV_SEQ_MASK NO_OS_GENMASK(9, 8)

#define	AD74413R_DIAG_EN_MASK(x) (NO_OS_BIT(x) << 4)

#define	AD74413R_CH_EN_MASK(x) NO_OS_BIT(x)

#define	AD74413R_DIAG_ASSIGN_MASK(x) (NO_OS_GENMASK(3, 0) << (x))

#define	AD74413R_DAC_RANGE 11000

#define	AD74413R_DAC_RESOLUTION 13

#define	AD74413R_THRESHOLD_DAC_RANGE 29

#define	AD74413R_THRESHOLD_RANGE 16000

#define	AD74413R_TEMP_OFFSET -2392

#define	AD74413R_TEMP_SCALE 8950

#define	AD74413R_TEMP_SCALE_DIV 1000

#define	AD74413R_RANGE_10V_SCALE 15259ULL

#define	AD74413R_RANGE_10V_SCALE_DIV 100000ULL

#define	AD74413R_RANGE_2V5_SCALE 38147ULL

#define	AD74413R_RANGE_2V5_SCALE_DIV 1000000ULL

#define	AD74413R_RANGE_5V_SCALE 76294ULL

#define	AD74413R_RANGE_5V_SCALE_DIV 1000000ULL

#define	AD74413R_RANGE_5V_OFFSET -(AD74413R_ADC_MAX_VALUE / 2)

#define	AD74413R_RTD_PULL_UP 2100000ULL

Enumerations
enum	ad74413r_chip_id { AD74413R, AD74412R }
	The chips supported by this driver. More...

enum	ad74413r_rejection { AD74413R_REJECTION_50_60, AD74413R_REJECTION_NONE, AD74413R_REJECTION_50_60_HART, AD74413R_REJECTION_HART }
	Rejection config values. The HART variants are not supported by the AD74412R device. More...

enum	ad74413r_op_mode { AD74413R_HIGH_Z, AD74413R_VOLTAGE_OUT, AD74413R_CURRENT_OUT, AD74413R_VOLTAGE_IN, AD74413R_CURRENT_IN_EXT, AD74413R_CURRENT_IN_LOOP, AD74413R_RESISTANCE, AD74413R_DIGITAL_INPUT, AD74413R_DIGITAL_INPUT_LOOP, AD74413R_CURRENT_IN_EXT_HART, AD74413R_CURRENT_IN_LOOP_HART }
	Operation modes of the device. More...

enum	ad74413r_adc_range { AD74413R_ADC_RANGE_10V, AD74413R_ADC_RANGE_2P5V_EXT_POW, AD74413R_ADC_RANGE_2P5V_INT_POW, AD74413R_ADC_RANGE_5V_BI_DIR }
	ADC ranges configurations. These are dependent on the operation mode. More...

enum	ad74413r_conv_seq { AD74413R_STOP_PWR_UP, AD74413R_START_SINGLE, AD74413R_START_CONT, AD74413R_STOP_PWR_DOWN }
	ADC conversion sequence commands. More...

enum	ad74413r_gpo_select { AD74413R_GPO_CONFIG_100K_PD, AD74413R_GPO_CONFIG_DATA, AD74413R_GPO_CONFIG_PAR_DATA, AD74413R_GPO_CONFIG_COMP, AD74413R_GPO_CONFIG_HIGH_Z }
	GPO operation modes. More...

enum	ad74413r_diag_mode { AD74413R_DIAG_AGND, AD74413R_DIAG_TEMP, AD74413R_DIAG_AVDD, AD74413R_DIAG_AVSS, AD74413R_DIAG_REFOUT, AD74413R_DIAG_ALDO_5V, AD74413R_DIAG_ALDO_1V8, AD74413R_DIAG_DLDO_1V8, AD74413R_DIAG_DVCC, AD74413R_DIAG_IOVDD, AD74413R_SENSEL_A, AD74413R_SENSEL_B, AD74413R_SENSEL_C, AD74413R_SENSEL_D }
	Possible values to be loaded in the DIAG_RESULT register. More...

enum	ad74413r_debounce_mode { AD74413R_DEBOUNCE_MODE_0, AD74413R_DEBOUNCE_MODE_1 }
	Debounce modes for the IOx inputs when using the digital input op mode. More...

enum	ad74413r_slew_lin_step { AD74413R_STEP_64, AD74413R_STEP_120, AD74413R_STEP_500, AD74413R_STEP_1820 }
	The number of increments per step a DAC does when slew control is enabled. More...

enum	ad74413r_lin_rate { AD74413R_LIN_RATE_4KHZ, AD74413R_LIN_RATE_64KHZ, AD74413R_LIN_RATE_150KHZ, AD74413R_LIN_RATE_240KHZ }
	Possible update rates for a DAC when slew control is enabled. More...

enum	ad74413r_adc_sample { AD74413R_ADC_SAMPLE_20HZ = 20, AD74413R_ADC_SAMPLE_4800HZ = 4800, AD74413R_ADC_SAMPLE_10HZ = 10, AD74413R_ADC_SAMPLE_1200HZ = 1200 }

Functions
int	ad74413r_dac_voltage_to_code (uint32_t, uint32_t *)
	Converts a millivolt value in the corresponding DAC 13 bit code. More...

int	ad74413r_reg_write (struct ad74413r_desc *, uint32_t, uint16_t)
	Write a register's value. More...

int	ad74413r_reg_read_raw (struct ad74413r_desc , uint32_t, uint8_t )
	Read a raw communication frame. More...

int	ad74413r_reg_read (struct ad74413r_desc , uint32_t, uint16_t )
	Read a register's value. More...

int	ad74413r_reg_update (struct ad74413r_desc *, uint32_t, uint16_t, uint16_t)
	Update a register's field. More...

int	ad74413r_nb_active_channels (struct ad74413r_desc , uint8_t )
	Get the number of active channels. More...

int	ad74413r_clear_errors (struct ad74413r_desc *)
	Clear the ALERT_STATUS register. More...

int	ad74413r_set_info (struct ad74413r_desc *desc, uint16_t mode)
	Select which information the device will respond with (in the readback field) when a read operation is performed. More...

int	ad74413r_reset (struct ad74413r_desc *)
	Perform a soft reset. More...

int	ad74413r_set_channel_function (struct ad74413r_desc *, uint32_t, enum ad74413r_op_mode)
	Set the operation mode for a specific channel. More...

int	ad74413r_get_raw_adc_result (struct ad74413r_desc , uint32_t, uint16_t )
	Read the raw ADC raw conversion value. More...

int	ad74413r_set_adc_channel_enable (struct ad74413r_desc *, uint32_t, bool)
	Enable/disable a specific ADC channel. More...

int	ad74413r_set_diag_channel_enable (struct ad74413r_desc *, uint32_t, bool)
	Enable conversions on a diagnostic register. More...

int	ad74413r_get_adc_range (struct ad74413r_desc , uint32_t, uint16_t )
	Get the ADC measurement range for a specific channel. More...

int	ad74413r_get_adc_rejection (struct ad74413r_desc , uint32_t, enum ad74413r_rejection )
	Get the rejection setting for a specific channel. More...

int	ad74413r_set_adc_rejection (struct ad74413r_desc *, uint32_t, enum ad74413r_rejection)
	Set the rejection setting for a specific channel. More...

int	ad74413r_get_adc_rate (struct ad74413r_desc , uint32_t, enum ad74413r_adc_sample )
	Get the ADC sample rate. More...

int	ad74413r_set_adc_rate (struct ad74413r_desc *, uint32_t, enum ad74413r_adc_sample)
	Set the ADC sample rate. More...

int	ad74413r_set_adc_conv_seq (struct ad74413r_desc *, enum ad74413r_conv_seq)
	Start or stop ADC conversions. More...

int	ad74413r_get_adc_single (struct ad74413r_desc , uint32_t, uint16_t )
	Get a single ADC raw value for a specific channel, then power down the ADC. More...

int	ad74413r_adc_get_value (struct ad74413r_desc , uint32_t, struct ad74413r_decimal )
	Get the ADC real value, according to the operation mode. More...

int	ad74413r_get_temp (struct ad74413r_desc , uint32_t, uint16_t )
	Read the die's temperature from the diagnostic register. More...

int	ad74413r_set_channel_dac_code (struct ad74413r_desc *, uint32_t, uint16_t)
	Set and load a code for the DAC on a specific channel. More...

int	ad74413r_set_diag (struct ad74413r_desc *, uint32_t, enum ad74413r_diag_mode)
	Set which diagnostic value to be loaded in the DIAG_RESULT register. More...

int	ad74413r_get_diag (struct ad74413r_desc , uint32_t, uint16_t )
	Get the diagnostic value for a specific channel. More...

int	ad74413r_set_debounce_mode (struct ad74413r_desc *, uint32_t, enum ad74413r_debounce_mode)
	Set the debounce mode for the IOx inputs when the ADC is running in digital input mode. More...

int	ad74413r_set_debounce_time (struct ad74413r_desc *, uint32_t, uint32_t)
	Set the debounce settle time for the IOx inputs when the ADC is running in digital input mode. More...

int	ad74413r_gpo_get (struct ad74413r_desc , uint32_t, uint8_t )
	Get the GPO value for a specific channel. More...

int	ad74413r_set_gpo_config (struct ad74413r_desc *, uint32_t, enum ad74413r_gpo_select)
	Set the GPO operation mode. More...

int	ad74413r_set_threshold (struct ad74413r_desc *, uint32_t, uint32_t)
	Set the threshold, for which a signal would be considered high, when the ADC is running in digital input mode. More...

int	ad74413r_gpo_set (struct ad74413r_desc *, uint32_t, uint8_t)
	Set the logic value of a GPO pin. More...

int	ad74413r_gpo_set_multiple (struct ad74413r_desc *, uint32_t)
	Set multiple GPO values at once. More...

int	ad74413r_get_live (struct ad74413r_desc , union ad74413r_live_status )
	Read the live status bits. More...

int	ad74413r_set_dac_clear_code (struct ad74413r_desc *, uint32_t, uint16_t)
	The code value will be loaded into the DACs when the CLR_EN bit in the OUTPUT_CONFIGx registers is asserted and the DAC clear key is written. More...

int	ad74413r_clear_dac (struct ad74413r_desc *, uint32_t)
	Clear the DAC (to the code in DAC_CLR_CODE register) More...

int	ad74413r_dac_slew_enable (struct ad74413r_desc *, uint32_t, enum ad74413r_slew_lin_step, enum ad74413r_lin_rate)
	Configure and enable slew rate control for a DAC on a specific channel. More...

int	ad74413r_dac_slew_disable (struct ad74413r_desc *, uint32_t)
	Disable the slew rate control. More...

int	ad74413r_set_therm_rst (struct ad74413r_desc *, bool)
	Enable or disable the higher thermal reset. More...

int	ad74413r_init (struct ad74413r_desc *, struct ad74413r_init_param )
	Initialize the device structure. More...

int	ad74413r_remove (struct ad74413r_desc *desc)
	Free the device descriptor. More...

Detailed Description

Header file of AD74413r Driver.

Author: Ciprian Regus (cipri.nosp@m.an.r.nosp@m.egus@.nosp@m.anal.nosp@m.og.co.nosp@m.m)

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of Analog Devices, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
The use of this software may or may not infringe the patent rights of one or more patent holders. This license does not release you from the requirement that you obtain separate licenses from these patent holders to use this software.
Use of the software either in source or binary form, must be run on or directly connected to an Analog Devices Inc. component.

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Macro Definition Documentation

◆ AD74413R_ADC_CONFIG

#define AD74413R_ADC_CONFIG ( x ) (0x05 + x)

◆ AD74413R_ADC_CONV_CTRL

#define AD74413R_ADC_CONV_CTRL 0x23

◆ AD74413R_ADC_MAX_VALUE

#define AD74413R_ADC_MAX_VALUE 65535

16 bit ADC

◆ AD74413R_ADC_RANGE_MASK

#define AD74413R_ADC_RANGE_MASK NO_OS_GENMASK(7, 5)

◆ AD74413R_ADC_REJECTION_MASK

#define AD74413R_ADC_REJECTION_MASK NO_OS_GENMASK(4, 3)

◆ AD74413R_ADC_RESULT

#define AD74413R_ADC_RESULT ( x ) (0x26 + x)

◆ AD74413R_ALERT_MASK

#define AD74413R_ALERT_MASK 0x3C

◆ AD74413R_ALERT_STATUS

#define AD74413R_ALERT_STATUS 0x2E

◆ AD74413R_ALERT_STATUS_RESET

#define AD74413R_ALERT_STATUS_RESET NO_OS_GENMASK(15, 0)

◆ AD74413R_CH_200K_TO_GND_MASK

#define AD74413R_CH_200K_TO_GND_MASK NO_OS_BIT(2)

◆ AD74413R_CH_A

#define AD74413R_CH_A 0

◆ AD74413R_CH_B

#define AD74413R_CH_B 1

◆ AD74413R_CH_C

#define AD74413R_CH_C 2

◆ AD74413R_CH_D

#define AD74413R_CH_D 3

◆ AD74413R_CH_EN_MASK

#define AD74413R_CH_EN_MASK ( x ) NO_OS_BIT(x)

◆ AD74413R_CH_FUNC_SETUP

#define AD74413R_CH_FUNC_SETUP ( x ) (0x01 + x)

◆ AD74413R_CH_FUNC_SETUP_MASK

#define AD74413R_CH_FUNC_SETUP_MASK NO_OS_GENMASK(3, 0)

◆ AD74413R_CLR_CODE_MASK

#define AD74413R_CLR_CODE_MASK NO_OS_GENMASK(12, 0)

DAC_CLR_CODEx register

◆ AD74413R_CLR_EN_MASK

#define AD74413R_CLR_EN_MASK NO_OS_BIT(1)

◆ AD74413R_CMD_KEY

#define AD74413R_CMD_KEY 0x44

◆ AD74413R_CMD_KEY_DAC_CLEAR

#define AD74413R_CMD_KEY_DAC_CLEAR 0x73D1

Command to load code into the DAC from DAC_CLR_CODEx

◆ AD74413R_CMD_KEY_LDAC

#define AD74413R_CMD_KEY_LDAC 0x953A

Command to load code into the DAC from DAC_CODEx

◆ AD74413R_CMD_KEY_RESET_1

#define AD74413R_CMD_KEY_RESET_1 0x15FA

Software reset sequence

◆ AD74413R_CMD_KEY_RESET_2

#define AD74413R_CMD_KEY_RESET_2 0xAF51

◆ AD74413R_COMP_THRESH_MASK

#define AD74413R_COMP_THRESH_MASK NO_OS_GENMASK(5, 1)

DIN_THRESH

◆ AD74413R_CONV_SEQ_MASK

#define AD74413R_CONV_SEQ_MASK NO_OS_GENMASK(9, 8)

ADC_CONV_CTRL register

◆ AD74413R_DAC_ACTIVE

#define AD74413R_DAC_ACTIVE ( x ) (0x1E + x)

◆ AD74413R_DAC_ACTIVE_CODE_MASK

#define AD74413R_DAC_ACTIVE_CODE_MASK NO_OS_GENMASK(12, 0)

DAC_ACTIVEx register

◆ AD74413R_DAC_CLR_CODE

#define AD74413R_DAC_CLR_CODE ( x ) (0x1A + x)

◆ AD74413R_DAC_CODE

#define AD74413R_DAC_CODE ( x ) (0x16 + x)

◆ AD74413R_DAC_CODE_MASK

#define AD74413R_DAC_CODE_MASK NO_OS_GENMASK(12, 0)

DAC_CODEx register

◆ AD74413R_DAC_RANGE

#define AD74413R_DAC_RANGE 11000

The maximum voltage output of the DAC is 11V

◆ AD74413R_DAC_RESOLUTION

#define AD74413R_DAC_RESOLUTION 13

13 bit DAC

◆ AD74413R_DEBOUNCE_MODE_MASK

#define AD74413R_DEBOUNCE_MODE_MASK NO_OS_BIT(5)

◆ AD74413R_DEBOUNCE_TIME_MASK

#define AD74413R_DEBOUNCE_TIME_MASK NO_OS_GENMASK(4, 0)

◆ AD74413R_DIAG_ASSIGN

#define AD74413R_DIAG_ASSIGN 0x24

◆ AD74413R_DIAG_ASSIGN_MASK

#define AD74413R_DIAG_ASSIGN_MASK ( x ) (NO_OS_GENMASK(3, 0) << (x))

DIAG_ASSIGN register

◆ AD74413R_DIAG_EN_MASK

#define AD74413R_DIAG_EN_MASK ( x ) (NO_OS_BIT(x) << 4)

◆ AD74413R_DIAG_RESULT

#define AD74413R_DIAG_RESULT ( x ) (0x2A + x)

◆ AD74413R_DIAG_RESULT_MASK

#define AD74413R_DIAG_RESULT_MASK NO_OS_GENMASK(15, 0)

◆ AD74413R_DIN_COMP_OUT

#define AD74413R_DIN_COMP_OUT 0x25

◆ AD74413R_DIN_CONFIG

#define AD74413R_DIN_CONFIG ( x ) (0x09 + x)

◆ AD74413R_DIN_COUNTER

#define AD74413R_DIN_COUNTER ( x ) (0x3D + x)

◆ AD74413R_DIN_THRESH

#define AD74413R_DIN_THRESH 0x22

◆ AD74413R_DIN_THRESH_MODE_MASK

#define AD74413R_DIN_THRESH_MODE_MASK NO_OS_BIT(0)

◆ AD74413R_ERR_CLR_MASK

#define AD74413R_ERR_CLR_MASK NO_OS_GENMASK(15, 0)

◆ AD74413R_GPO_CONFIG

#define AD74413R_GPO_CONFIG ( x ) (0x0E + x)

◆ AD74413R_GPO_DATA_MASK

#define AD74413R_GPO_DATA_MASK NO_OS_BIT(3)

◆ AD74413R_GPO_PAR_DATA_MASK

#define AD74413R_GPO_PAR_DATA_MASK ( x ) NO_OS_BIT(x)

GPO_PARALLEL register

◆ AD74413R_GPO_PARALLEL

#define AD74413R_GPO_PARALLEL 0x0D

◆ AD74413R_GPO_SELECT_MASK

#define AD74413R_GPO_SELECT_MASK NO_OS_GENMASK(2, 0)

GPO_CONFIGx register

◆ AD74413R_I_LIMIT_MASK

#define AD74413R_I_LIMIT_MASK NO_OS_BIT(0)

◆ AD74413R_LIVE_STATUS

#define AD74413R_LIVE_STATUS 0x2F

◆ AD74413R_N_CHANNELS

#define AD74413R_N_CHANNELS 4

◆ AD74413R_NOP

#define AD74413R_NOP 0x00

Register map

◆ AD74413R_OUTPUT_CONFIG

#define AD74413R_OUTPUT_CONFIG ( x ) (0x12 + x)

◆ AD74413R_RANGE_10V_SCALE

#define AD74413R_RANGE_10V_SCALE 15259ULL

◆ AD74413R_RANGE_10V_SCALE_DIV

#define AD74413R_RANGE_10V_SCALE_DIV 100000ULL

◆ AD74413R_RANGE_2V5_SCALE

#define AD74413R_RANGE_2V5_SCALE 38147ULL

◆ AD74413R_RANGE_2V5_SCALE_DIV

#define AD74413R_RANGE_2V5_SCALE_DIV 1000000ULL

◆ AD74413R_RANGE_5V_OFFSET

#define AD74413R_RANGE_5V_OFFSET -(AD74413R_ADC_MAX_VALUE / 2)

◆ AD74413R_RANGE_5V_SCALE

#define AD74413R_RANGE_5V_SCALE 76294ULL

◆ AD74413R_RANGE_5V_SCALE_DIV

#define AD74413R_RANGE_5V_SCALE_DIV 1000000ULL

◆ AD74413R_READ_SELECT

#define AD74413R_READ_SELECT 0x41

◆ AD74413R_REV_ID

#define AD74413R_REV_ID NO_OS_GENMASK(7, 0)

◆ AD74413R_RSENSE

#define AD74413R_RSENSE 100

The value of the sense resistor in ohms

◆ AD74413R_RTD_PULL_UP

#define AD74413R_RTD_PULL_UP 2100000ULL

◆ AD74413R_SCRATCH

#define AD74413R_SCRATCH 0x45

◆ AD74413R_SILICON_REV

#define AD74413R_SILICON_REV 0x46

◆ AD74413R_SLEW_EN_MASK

#define AD74413R_SLEW_EN_MASK NO_OS_GENMASK(7, 6)

OUTPUT_CONFIGx register

◆ AD74413R_SLEW_LIN_RATE_MASK

#define AD74413R_SLEW_LIN_RATE_MASK NO_OS_GENMASK(3, 2)

◆ AD74413R_SLEW_LIN_STEP_MASK

#define AD74413R_SLEW_LIN_STEP_MASK NO_OS_GENMASK(5, 4)

◆ AD74413R_SPI_CRC_ERR_MASK

#define AD74413R_SPI_CRC_ERR_MASK NO_OS_BIT(13)

◆ AD74413R_SPI_RD_RET_INFO_MASK

#define AD74413R_SPI_RD_RET_INFO_MASK NO_OS_BIT(8)

◆ AD74413R_TEMP_OFFSET

#define AD74413R_TEMP_OFFSET -2392

◆ AD74413R_TEMP_SCALE

#define AD74413R_TEMP_SCALE 8950

◆ AD74413R_TEMP_SCALE_DIV

#define AD74413R_TEMP_SCALE_DIV 1000

◆ AD74413R_THERM_RST

#define AD74413R_THERM_RST 0x43

◆ AD74413R_THRESHOLD_DAC_RANGE

#define AD74413R_THRESHOLD_DAC_RANGE 29

The number of possible DAC values

◆ AD74413R_THRESHOLD_RANGE

#define AD74413R_THRESHOLD_RANGE 16000

The comparator's value can be set betwen 0 - 16 V

Enumeration Type Documentation

◆ ad74413r_adc_range

enum ad74413r_adc_range

ADC ranges configurations. These are dependent on the operation mode.

Enumerator
AD74413R_ADC_RANGE_10V
AD74413R_ADC_RANGE_2P5V_EXT_POW
AD74413R_ADC_RANGE_2P5V_INT_POW
AD74413R_ADC_RANGE_5V_BI_DIR

◆ ad74413r_adc_sample

enum ad74413r_adc_sample

Enumerator
AD74413R_ADC_SAMPLE_20HZ
AD74413R_ADC_SAMPLE_4800HZ
AD74413R_ADC_SAMPLE_10HZ
AD74413R_ADC_SAMPLE_1200HZ

◆ ad74413r_chip_id

enum ad74413r_chip_id

The chips supported by this driver.

Enumerator
AD74413R
AD74412R

◆ ad74413r_conv_seq

enum ad74413r_conv_seq

ADC conversion sequence commands.

Enumerator
AD74413R_STOP_PWR_UP
AD74413R_START_SINGLE
AD74413R_START_CONT
AD74413R_STOP_PWR_DOWN

◆ ad74413r_debounce_mode

enum ad74413r_debounce_mode

Debounce modes for the IOx inputs when using the digital input op mode.

Enumerator
AD74413R_DEBOUNCE_MODE_0
AD74413R_DEBOUNCE_MODE_1

◆ ad74413r_diag_mode

enum ad74413r_diag_mode

Possible values to be loaded in the DIAG_RESULT register.

Enumerator
AD74413R_DIAG_AGND
AD74413R_DIAG_TEMP
AD74413R_DIAG_AVDD
AD74413R_DIAG_AVSS
AD74413R_DIAG_REFOUT
AD74413R_DIAG_ALDO_5V
AD74413R_DIAG_ALDO_1V8
AD74413R_DIAG_DLDO_1V8
AD74413R_DIAG_DVCC
AD74413R_DIAG_IOVDD
AD74413R_SENSEL_A
AD74413R_SENSEL_B
AD74413R_SENSEL_C
AD74413R_SENSEL_D

◆ ad74413r_gpo_select

enum ad74413r_gpo_select

GPO operation modes.

Enumerator
AD74413R_GPO_CONFIG_100K_PD
AD74413R_GPO_CONFIG_DATA
AD74413R_GPO_CONFIG_PAR_DATA
AD74413R_GPO_CONFIG_COMP
AD74413R_GPO_CONFIG_HIGH_Z

◆ ad74413r_lin_rate

enum ad74413r_lin_rate

Possible update rates for a DAC when slew control is enabled.

Enumerator
AD74413R_LIN_RATE_4KHZ
AD74413R_LIN_RATE_64KHZ
AD74413R_LIN_RATE_150KHZ
AD74413R_LIN_RATE_240KHZ

◆ ad74413r_op_mode

enum ad74413r_op_mode

Operation modes of the device.

Enumerator
AD74413R_HIGH_Z
AD74413R_VOLTAGE_OUT
AD74413R_CURRENT_OUT
AD74413R_VOLTAGE_IN
AD74413R_CURRENT_IN_EXT
AD74413R_CURRENT_IN_LOOP
AD74413R_RESISTANCE
AD74413R_DIGITAL_INPUT
AD74413R_DIGITAL_INPUT_LOOP
AD74413R_CURRENT_IN_EXT_HART
AD74413R_CURRENT_IN_LOOP_HART

◆ ad74413r_rejection

enum ad74413r_rejection

Rejection config values. The HART variants are not supported by the AD74412R device.

Enumerator
AD74413R_REJECTION_50_60
AD74413R_REJECTION_NONE
AD74413R_REJECTION_50_60_HART
AD74413R_REJECTION_HART

◆ ad74413r_slew_lin_step

enum ad74413r_slew_lin_step

The number of increments per step a DAC does when slew control is enabled.

Enumerator
AD74413R_STEP_64
AD74413R_STEP_120
AD74413R_STEP_500
AD74413R_STEP_1820

Function Documentation

◆ ad74413r_adc_get_value()

int ad74413r_adc_get_value	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		struct ad74413r_decimal *	val
	)

Get the ADC real value, according to the operation mode.

Get the ADC real value, according to the operation mode

Parameters

desc	- The device structure.
ch	- The channel index.
val	- The ADC real measurement value (the unit depends on the operation mode).

Returns: 0 in case of success, negative error code otherwise.

I_Rsense = (Vmin + (ADC_CODE/65535) * range) / Rsense

Here is the caller graph for this function:

◆ ad74413r_clear_dac()

int ad74413r_clear_dac	(	struct ad74413r_desc *	desc,
		uint32_t	ch
	)

Clear the DAC (to the code in DAC_CLR_CODE register)

Parameters

desc	- The device structure.
ch	- The channel index.

Returns: 0 in case of success, negative error code otherwise.

◆ ad74413r_clear_errors()

int ad74413r_clear_errors ( struct ad74413r_desc * desc )

Clear the ALERT_STATUS register.

Clear the ALERT_STATUS register

Parameters

desc	- The device structure.

Returns: 0 in case of success, negative error otherwise.

Here is the caller graph for this function:

◆ ad74413r_dac_slew_disable()

int ad74413r_dac_slew_disable	(	struct ad74413r_desc *	desc,
		uint32_t	ch
	)

Disable the slew rate control.

Disable the slew rate control

Parameters

desc	- The device structure.
ch	- The channel index.

Returns: 0 in case of success, negative error code otherwise.

◆ ad74413r_dac_slew_enable()

int ad74413r_dac_slew_enable	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		enum ad74413r_slew_lin_step	step,
		enum ad74413r_lin_rate	rate
	)

Configure and enable slew rate control for a DAC on a specific channel.

Configure and enable slew rate control for a DAC on a specific channel

Parameters

desc	- The device structure.
ch	- The channel index.
step	- Number of codes per increment.
rate	- Number of increments per second.

Returns: 0 in case of success, negative error code otherwise.

◆ ad74413r_dac_voltage_to_code()

int ad74413r_dac_voltage_to_code	(	uint32_t	mvolts,
		uint32_t *	code
	)

Converts a millivolt value in the corresponding DAC 13 bit code.

Converts a millivolt value in the corresponding DAC 13 bit code

Parameters

mvolts	- The millivolts value.
code	- The resulting DAC code.

Returns: 0 in case of success, -EINVAL otherwise

Here is the caller graph for this function:

◆ ad74413r_get_adc_range()

int ad74413r_get_adc_range	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		uint16_t *	val
	)

Get the ADC measurement range for a specific channel.

Get the ADC measurement range for a specific channel

Parameters

desc	- The device structure.
ch	- The channel index.
val	- The ADC range value.

Returns: 0 in case of success, negative error code otherwise.

◆ ad74413r_get_adc_rate()

int ad74413r_get_adc_rate	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		enum ad74413r_adc_sample *	val
	)

Get the ADC sample rate.

Parameters

desc	- The device structure.
ch	- The channel index.
val	- The ADC sample rate value.

Returns: 0 in case of success, negative error code otherwise.

◆ ad74413r_get_adc_rejection()

int ad74413r_get_adc_rejection	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		enum ad74413r_rejection *	val
	)

Get the rejection setting for a specific channel.

Get the rejection setting for a specific channel

Parameters

desc	- The device structure.
ch	- The channel index.
val	- The ADC rejection setting.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ad74413r_get_adc_single()

int ad74413r_get_adc_single	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		uint16_t *	val
	)

Get a single ADC raw value for a specific channel, then power down the ADC.

Get a single ADC raw value for a specific channel, then power down the ADC

Parameters

desc	- The device structure.
ch	- The channel index.
val	- The ADC raw result.

Returns: 0 in case of success, negative error code otherwise.

Wait for all channels to complete the conversion.

Here is the caller graph for this function:

◆ ad74413r_get_diag()

int ad74413r_get_diag	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		uint16_t *	diag_code
	)

Get the diagnostic value for a specific channel.

Get the diagnostic value for a specific channel

Parameters

desc	- The device structure.
ch	- The channel index.
diag_code	- The diagnostic setting.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ad74413r_get_live()

int ad74413r_get_live	(	struct ad74413r_desc *	desc,
		union ad74413r_live_status *	status
	)

Read the live status bits.

Read the live status bits

Parameters

desc	- The device structure.
status	- The register's value.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ad74413r_get_raw_adc_result()

int ad74413r_get_raw_adc_result	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		uint16_t *	val
	)

Read the raw ADC raw conversion value.

Read the raw ADC raw conversion value

Parameters

desc	- The device structure.
ch	- The channel index.
val	- The ADC raw conversion value.

Returns: 0 in case of success, negative error code otherwise.

◆ ad74413r_get_temp()

int ad74413r_get_temp	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		uint16_t *	temp
	)

Read the die's temperature from the diagnostic register.

Read the die's temperature from the diagnostic register

Parameters

desc	- The device structure.
ch	- The diagnostic channel on which the temperature reading is assigned and enabled.
temp	- The measured temperature (in degrees Celsius).

Returns: 0 in case of success, -EINVAL otherwise.

Here is the caller graph for this function:

◆ ad74413r_gpo_get()

int ad74413r_gpo_get	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		uint8_t *	val
	)

Get the GPO value for a specific channel.

Get the GPO value for a specific channel

Parameters

desc	- The device structure.
ch	- The channel index.
val	- The debounce time.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ad74413r_gpo_set()

int ad74413r_gpo_set	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		uint8_t	val
	)

Set the logic value of a GPO pin.

Set the logic value of a GPO pin

Parameters

desc	- The device structure.
ch	- The channel index.
val	- The output logic state.

Returns: 0 in case of success, negative error code otherwise.

◆ ad74413r_gpo_set_multiple()

int ad74413r_gpo_set_multiple	(	struct ad74413r_desc *	desc,
		uint32_t	mask
	)

Set multiple GPO values at once.

Set multiple GPO values at once

Parameters

desc	- The device structure.
mask	- Active channels mask.

Returns: 0 in case of success, negative error code otherwise.

◆ ad74413r_init()

int ad74413r_init	(	struct ad74413r_desc **	desc,
		struct ad74413r_init_param *	init_param
	)

Initialize the device structure.

Initialize the device structure

Parameters

desc	- The device structure to be initialized.
init_param	- Initialization parameter for the device descriptor.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ad74413r_nb_active_channels()

int ad74413r_nb_active_channels	(	struct ad74413r_desc *	desc,
		uint8_t *	nb_channels
	)

Get the number of active channels.

Get the number of active channels

Parameters

desc	- The device structure.
nb_channels	- The number of active channels

Returns: 0 in case of success, negative error otherwise.

Here is the caller graph for this function:

◆ ad74413r_reg_read()

int ad74413r_reg_read	(	struct ad74413r_desc *	desc,
		uint32_t	addr,
		uint16_t *	val
	)

Read a register's value.

Read a register's value

Parameters

desc	- The device structure.
addr	- The register's address.
val	- The register's read value.

Returns: 0 in case of success, negative error otherwise

Here is the caller graph for this function:

◆ ad74413r_reg_read_raw()

int ad74413r_reg_read_raw	(	struct ad74413r_desc *	desc,
		uint32_t	addr,
		uint8_t *	val
	)

Read a raw communication frame.

Read a raw communication frame

Parameters

desc	- The device structure.
addr	- The register's address.
val	- A raw comm frame.

Returns: 0 in case of success, negative error otherwise.

Reading a register on AD74413r requires writing the address to the READ_SELECT register first and then doing another spi read, which will contain the requested register value.

Here is the caller graph for this function:

◆ ad74413r_reg_update()

int ad74413r_reg_update	(	struct ad74413r_desc *	desc,
		uint32_t	addr,
		uint16_t	mask,
		uint16_t	val
	)

Update a register's field.

Update a register's field

Parameters

desc	- The device structure.
addr	- The register's address.
val	- The register's value.
mask	- The mask for a specific register field.

Returns: 0 in case of success, negative error otherwise.

Here is the caller graph for this function:

◆ ad74413r_reg_write()

int ad74413r_reg_write	(	struct ad74413r_desc *	desc,
		uint32_t	addr,
		uint16_t	val
	)

Write a register's value.

Write a register's value

Parameters

desc	- The device structure.
addr	- The register's address.
val	- The register's value.

Returns: 0 in case of success, negative error otherwise

Here is the caller graph for this function:

◆ ad74413r_remove()

int ad74413r_remove ( struct ad74413r_desc * desc )

Free the device descriptor.

Free the device descriptor

Parameters

desc	- The device structure.

Returns: 0 in case of success, -EINVAL otherwise.

Here is the caller graph for this function:

◆ ad74413r_reset()

int ad74413r_reset ( struct ad74413r_desc * desc )

Perform a soft reset.

Perform a soft reset

Parameters

desc	- The device structure.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ad74413r_set_adc_channel_enable()

int ad74413r_set_adc_channel_enable	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		bool	status
	)

Enable/disable a specific ADC channel.

Enable/disable a specific ADC channel

Parameters

desc	- The device structure.
ch	- The channel index.
status	- Enabled or disabled status.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ad74413r_set_adc_conv_seq()

int ad74413r_set_adc_conv_seq	(	struct ad74413r_desc *	desc,
		enum ad74413r_conv_seq	status
	)

Start or stop ADC conversions.

Start or stop ADC conversions

Parameters

desc	- The device structure.
status	- The ADC conversion sequence.

Returns: 0 in case of success, negative error code otherwise.

The write to CONV_SEQ powers up the ADC. If the ADC was powered down, the user must wait for 100us before the ADC starts doing conversions.

Here is the caller graph for this function:

◆ ad74413r_set_adc_rate()

int ad74413r_set_adc_rate	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		enum ad74413r_adc_sample	val
	)

Set the ADC sample rate.

Parameters

desc	- The device structure.
ch	- The channel index.
val	- The ADC sample rate value.

Returns: 0 in case of success, negative error code otherwise.

◆ ad74413r_set_adc_rejection()

int ad74413r_set_adc_rejection	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		enum ad74413r_rejection	val
	)

Set the rejection setting for a specific channel.

Set the rejection setting for a specific channel

Parameters

desc	- The device structure.
ch	- The channel index.
val	- The ADC rejection setting.

Returns: 0 in case of success, negative error code otherwise.

◆ ad74413r_set_channel_dac_code()

int ad74413r_set_channel_dac_code	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		uint16_t	dac_code
	)

Set and load a code for the DAC on a specific channel.

Set and load a code for the DAC on a specific channel

Parameters

desc	- The device structure.
ch	- The channel index.
dac_code	- The code for the DAC.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ad74413r_set_channel_function()

int ad74413r_set_channel_function	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		enum ad74413r_op_mode	ch_func
	)

Set the operation mode for a specific channel.

Set the operation mode for a specific channel

Parameters

desc	- The device structure.
ch	- The channel index.
ch_func	- The operation mode.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ad74413r_set_dac_clear_code()

int ad74413r_set_dac_clear_code	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		uint16_t	code
	)

The code value will be loaded into the DACs when the CLR_EN bit in the OUTPUT_CONFIGx registers is asserted and the DAC clear key is written.

The code value will be loaded into the DACs when the CLR_EN bit in the OUTPUT_CONFIGx registers is asserted and the DAC clear key is written

Parameters

desc	- The device structure.
ch	- The channel index.
code	- The DAC code to be loaded

Returns: 0 in case of success, negative error code otherwise.

◆ ad74413r_set_debounce_mode()

int ad74413r_set_debounce_mode	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		enum ad74413r_debounce_mode	mode
	)

Set the debounce mode for the IOx inputs when the ADC is running in digital input mode.

Parameters

desc	- The device structure.
ch	- The channel index.
mode	- The debounce mode.

Returns: 0 in case of success, negative error code otherwise.

◆ ad74413r_set_debounce_time()

int ad74413r_set_debounce_time	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		uint32_t	time
	)

Set the debounce settle time for the IOx inputs when the ADC is running in digital input mode.

Set the debounce settle time for the IOx inputs when the ADC is running in digital input mode

Parameters

desc	- The device structure.
ch	- The channel index.
time	- The debounce time.

Returns: 0 in case of success, negative error code otherwise.

◆ ad74413r_set_diag()

int ad74413r_set_diag	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		enum ad74413r_diag_mode	diag_code
	)

Set which diagnostic value to be loaded in the DIAG_RESULT register.

Set which diagnostic value to be loaded in the DIAG_RESULT register

Parameters

desc	- The device structure.
ch	- The channel index.
diag_code	- The diagnostic setting.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ad74413r_set_diag_channel_enable()

int ad74413r_set_diag_channel_enable	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		bool	status
	)

Enable conversions on a diagnostic register.

Enable conversions on a diagnostic register

Parameters

desc	- The device structure.
ch	- Diagnostic channel index.
status	- Enabled or disabled status.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ad74413r_set_gpo_config()

int ad74413r_set_gpo_config	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		enum ad74413r_gpo_select	config
	)

Set the GPO operation mode.

Set the GPO operation mode

Parameters

desc	- The device structure.
ch	- The channel index.
config	- The configuration setting.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ad74413r_set_info()

int ad74413r_set_info	(	struct ad74413r_desc *	desc,
		uint16_t	mode
	)

Select which information the device will respond with (in the readback field) when a read operation is performed.

Select which information the device will respond with (in the readback field) when a read operation is performed

Parameters

desc	- The device structure.
mode	- Possible values: 0 - Respond with the readback address. 1 - Respond with status bits.

Returns: 0 in case of success, negative error otherwise.

◆ ad74413r_set_therm_rst()

int ad74413r_set_therm_rst	(	struct ad74413r_desc *	desc,
		bool	enable
	)

Enable or disable the higher thermal reset.

Enable or disable the higher thermal reset

Parameters

desc	- The device structure.
enable	- The thermal reset status. false: reset at 110 deg. Celsius. true: reset at 140 deg. Celsius.

Returns: 0 in case of success, negative error code otherwise.

◆ ad74413r_set_threshold()

int ad74413r_set_threshold	(	struct ad74413r_desc *	desc,
		uint32_t	ch,
		uint32_t	threshold
	)

Set the threshold, for which a signal would be considered high, when the ADC is running in digital input mode.

Set the threshold, for which a signal would be considered high, when the ADC is running in digital input mode

Parameters

desc	- The device structure.
ch	- The channel index.
threshold	- The threshold value (in millivolts). The actual threshold set might not match this value (~500mV max. error), since it's fairly low resolution (29 possible values).

Returns: 0 in case of success, negative error code otherwise.

Set a fixed range (0 - 16 V) for the threshold, so it would not depend on Vadd.

Here is the caller graph for this function:

Classes

Macros

Enumerations

Functions

Detailed Description

Macro Definition Documentation

◆ AD74413R_ADC_CONFIG

◆ AD74413R_ADC_CONV_CTRL

◆ AD74413R_ADC_MAX_VALUE

◆ AD74413R_ADC_RANGE_MASK

◆ AD74413R_ADC_REJECTION_MASK

◆ AD74413R_ADC_RESULT

◆ AD74413R_ALERT_MASK

◆ AD74413R_ALERT_STATUS

◆ AD74413R_ALERT_STATUS_RESET

◆ AD74413R_CH_200K_TO_GND_MASK

◆ AD74413R_CH_A

◆ AD74413R_CH_B

◆ AD74413R_CH_C

◆ AD74413R_CH_D

◆ AD74413R_CH_EN_MASK

◆ AD74413R_CH_FUNC_SETUP

◆ AD74413R_CH_FUNC_SETUP_MASK

◆ AD74413R_CLR_CODE_MASK

◆ AD74413R_CLR_EN_MASK

◆ AD74413R_CMD_KEY

◆ AD74413R_CMD_KEY_DAC_CLEAR

◆ AD74413R_CMD_KEY_LDAC

◆ AD74413R_CMD_KEY_RESET_1

◆ AD74413R_CMD_KEY_RESET_2

◆ AD74413R_COMP_THRESH_MASK

◆ AD74413R_CONV_SEQ_MASK

◆ AD74413R_DAC_ACTIVE

◆ AD74413R_DAC_ACTIVE_CODE_MASK

◆ AD74413R_DAC_CLR_CODE

◆ AD74413R_DAC_CODE

◆ AD74413R_DAC_CODE_MASK

◆ AD74413R_DAC_RANGE

◆ AD74413R_DAC_RESOLUTION

◆ AD74413R_DEBOUNCE_MODE_MASK

◆ AD74413R_DEBOUNCE_TIME_MASK

◆ AD74413R_DIAG_ASSIGN

◆ AD74413R_DIAG_ASSIGN_MASK

◆ AD74413R_DIAG_EN_MASK

◆ AD74413R_DIAG_RESULT

◆ AD74413R_DIAG_RESULT_MASK

◆ AD74413R_DIN_COMP_OUT

◆ AD74413R_DIN_CONFIG

◆ AD74413R_DIN_COUNTER

◆ AD74413R_DIN_THRESH

◆ AD74413R_DIN_THRESH_MODE_MASK

◆ AD74413R_ERR_CLR_MASK

◆ AD74413R_GPO_CONFIG

◆ AD74413R_GPO_DATA_MASK

◆ AD74413R_GPO_PAR_DATA_MASK

◆ AD74413R_GPO_PARALLEL

◆ AD74413R_GPO_SELECT_MASK

◆ AD74413R_I_LIMIT_MASK

◆ AD74413R_LIVE_STATUS

◆ AD74413R_N_CHANNELS

◆ AD74413R_NOP

◆ AD74413R_OUTPUT_CONFIG

◆ AD74413R_RANGE_10V_SCALE

◆ AD74413R_RANGE_10V_SCALE_DIV

◆ AD74413R_RANGE_2V5_SCALE

◆ AD74413R_RANGE_2V5_SCALE_DIV

◆ AD74413R_RANGE_5V_OFFSET

◆ AD74413R_RANGE_5V_SCALE

◆ AD74413R_RANGE_5V_SCALE_DIV

◆ AD74413R_READ_SELECT

◆ AD74413R_REV_ID

◆ AD74413R_RSENSE

◆ AD74413R_RTD_PULL_UP

◆ AD74413R_SCRATCH

◆ AD74413R_SILICON_REV

◆ AD74413R_SLEW_EN_MASK

◆ AD74413R_SLEW_LIN_RATE_MASK

◆ AD74413R_SLEW_LIN_STEP_MASK

◆ AD74413R_SPI_CRC_ERR_MASK

◆ AD74413R_SPI_RD_RET_INFO_MASK