no-OS
Macros | Functions
ad9083.c File Reference

Implementation of ad9083 Driver. More...

#include <errno.h>
#include <stdlib.h>
#include "ad9083.h"
#include "adi_ad9083_hal.h"
#include "no-os/error.h"
#include <inttypes.h>
#include "no-os/delay.h"
#include "no-os/clk.h"
#include "uc_settings.h"
#include "no-os/util.h"
#include "no-os/print_log.h"
Include dependency graph for ad9083.c:

Macros

#define CHIPID_AD9083   0x00EA
 
#define CHIPID_MASK   0xFFFF
 
#define SPI_IN_OUT_BUFF_SZ   0x3
 
#define MAX_REG_ADDR   0x1000
 
#define SPI_READ   0x80
 

Functions

int32_t adi_ad9083_jtx_startup (adi_ad9083_device_t *device, adi_cms_jesd_param_t *jtx_param)
 
int32_t adi_ad9083_jesd_tx_link_digital_reset (adi_ad9083_device_t *device, uint8_t reset)
 
int32_t ad9083_reg_get (struct ad9083_phy *device, uint32_t reg, uint8_t *readval)
 Read register. More...
 
int32_t ad9083_reg_set (struct ad9083_phy *device, uint32_t reg, uint8_t writeval)
 Write register. More...
 
int32_t ad9083_log_write (void *user_data, int32_t log_type, const char *message, va_list argp)
 
int32_t ad9083_reset_pin_ctrl (void *user_data, uint8_t enable)
 
int32_t ad9083_init (struct ad9083_phy **device, struct ad9083_init_param *init_param)
 
int32_t ad9083_remove (struct ad9083_phy *dev)
 Free the resources allocated by ad9083_init(). More...
 

Detailed Description

Implementation of ad9083 Driver.

Author
Cristian Pop (crist.nosp@m.ian..nosp@m.pop@a.nosp@m.nalo.nosp@m.g.com)

Copyright 2021(c) Analog Devices, Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Macro Definition Documentation

◆ CHIPID_AD9083

#define CHIPID_AD9083   0x00EA

◆ CHIPID_MASK

#define CHIPID_MASK   0xFFFF

◆ MAX_REG_ADDR

#define MAX_REG_ADDR   0x1000

◆ SPI_IN_OUT_BUFF_SZ

#define SPI_IN_OUT_BUFF_SZ   0x3

◆ SPI_READ

#define SPI_READ   0x80

Function Documentation

◆ ad9083_init()

int32_t ad9083_init ( struct ad9083_phy **  device,
struct ad9083_init_param init_param 
)

Initialize the device.

Parameters
device- The device structure.
init_param- The structure that contains the device initial parameters.
Returns
SUCCESS in case of success, negative error code otherwise.
Here is the caller graph for this function:

◆ ad9083_log_write()

int32_t ad9083_log_write ( void *  user_data,
int32_t  log_type,
const char *  message,
va_list  argp 
)

Log write

Parameters
user_data
log_type- Log source type.
message- Message.
argp- Argp.
Returns
SUCCESS in case of success, FAILURE otherwise.

◆ ad9083_reg_get()

int32_t ad9083_reg_get ( struct ad9083_phy device,
uint32_t  reg,
uint8_t *  readval 
)

Read register.

Parameters
device- ad9083 device.
reg- Address of the register.
readval- Value of the register.
Returns
SUCCESS in case of success, FAILURE otherwise.
Here is the caller graph for this function:

◆ ad9083_reg_set()

int32_t ad9083_reg_set ( struct ad9083_phy device,
uint32_t  reg,
uint8_t  writeval 
)

Write register.

Parameters
device- ad9083 device.
reg- Address of the register.
writeval- Value of the register.
Returns
SUCCESS in case of success, FAILURE otherwise.

◆ ad9083_remove()

int32_t ad9083_remove ( struct ad9083_phy dev)

Free the resources allocated by ad9083_init().

Parameters
dev- Device descriptor.
Returns
SUCCESS in case of success, FAILURE otherwise.

◆ ad9083_reset_pin_ctrl()

int32_t ad9083_reset_pin_ctrl ( void *  user_data,
uint8_t  enable 
)

Reset pin control

Parameters
user_data
enable- State.
Returns
SUCCESS in case of success, FAILURE otherwise.

◆ adi_ad9083_jesd_tx_link_digital_reset()

int32_t adi_ad9083_jesd_tx_link_digital_reset ( adi_ad9083_device_t *  device,
uint8_t  reset 
)

◆ adi_ad9083_jtx_startup()

int32_t adi_ad9083_jtx_startup ( adi_ad9083_device_t *  device,
adi_cms_jesd_param_t *  jtx_param 
)