Implementation of AD9144 Driver. More...
#include <stdlib.h>#include <stdio.h>#include <stdbool.h>#include "ad9144.h"#include "no_os_error.h"
Classes | |
| struct | ad9144_jesd204_link_mode |
| struct | ad9144_reg_seq |
Functions | |
| int32_t | ad9144_spi_read (struct ad9144_dev *dev, uint16_t reg_addr, uint8_t *reg_data) |
| ad9144_spi_read More... | |
| int32_t | ad9144_spi_write (struct ad9144_dev *dev, uint16_t reg_addr, uint8_t reg_data) |
| ad9144_spi_write More... | |
| int32_t | ad9144_spi_check_status (struct ad9144_dev *dev, uint16_t reg_addr, uint8_t reg_mask, uint8_t exp_reg_data) |
| ad9144_spi_check_status More... | |
| int32_t | ad9144_spi_write_seq (struct ad9144_dev *dev, const struct ad9144_reg_seq *seq, uint32_t num) |
| int32_t | ad9144_setup_jesd204_link (struct ad9144_dev *dev, const struct ad9144_init_param *init_param) |
| int32_t | ad9144_set_nco (struct ad9144_dev *dev, int32_t f_carrier_khz, int16_t phase) |
| int32_t | ad9144_setup (struct ad9144_dev **device, const struct ad9144_init_param *init_param) |
| ad9144_setup More... | |
| int32_t | ad9144_dac_calibrate (struct ad9144_dev *dev) |
| int32_t | ad9144_remove (struct ad9144_dev *dev) |
| Free the resources allocated by ad9144_setup(). More... | |
| int32_t | ad9144_status (struct ad9144_dev *dev) |
| ad9144_status - return the status of the JESD interface More... | |
| int32_t | ad9144_short_pattern_test (struct ad9144_dev *dev, const struct ad9144_init_param *init_param) |
| ad9144_short_pattern_test More... | |
| int32_t | ad9144_datapath_prbs_test (struct ad9144_dev *dev, const struct ad9144_init_param *init_param) |
| ad9144_datapath_prbs_test More... | |
Detailed Description
Implementation of AD9144 Driver.
Copyright 2014-2016(c) Analog Devices, Inc.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- Neither the name of Analog Devices, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
- The use of this software may or may not infringe the patent rights of one or more patent holders. This license does not release you from the requirement that you obtain separate licenses from these patent holders to use this software.
- Use of the software either in source or binary form, must be run on or directly connected to an Analog Devices Inc. component.
THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Function Documentation
◆ ad9144_dac_calibrate()
| int32_t ad9144_dac_calibrate | ( | struct ad9144_dev * | dev | ) |
◆ ad9144_datapath_prbs_test()
| int32_t ad9144_datapath_prbs_test | ( | struct ad9144_dev * | dev, |
| const struct ad9144_init_param * | init_param | ||
| ) |
ad9144_datapath_prbs_test
◆ ad9144_remove()
| int32_t ad9144_remove | ( | struct ad9144_dev * | dev | ) |
Free the resources allocated by ad9144_setup().
- Parameters
-
dev - The device structure.
- Returns
- 0 in case of success, negative error code otherwise.
◆ ad9144_set_nco()
| int32_t ad9144_set_nco | ( | struct ad9144_dev * | dev, |
| int32_t | f_carrier_khz, | ||
| int16_t | phase | ||
| ) |
◆ ad9144_setup()
| int32_t ad9144_setup | ( | struct ad9144_dev ** | device, |
| const struct ad9144_init_param * | init_param | ||
| ) |
ad9144_setup
◆ ad9144_setup_jesd204_link()
| int32_t ad9144_setup_jesd204_link | ( | struct ad9144_dev * | dev, |
| const struct ad9144_init_param * | init_param | ||
| ) |
◆ ad9144_short_pattern_test()
| int32_t ad9144_short_pattern_test | ( | struct ad9144_dev * | dev, |
| const struct ad9144_init_param * | init_param | ||
| ) |
ad9144_short_pattern_test
◆ ad9144_spi_check_status()
| int32_t ad9144_spi_check_status | ( | struct ad9144_dev * | dev, |
| uint16_t | reg_addr, | ||
| uint8_t | reg_mask, | ||
| uint8_t | exp_reg_data | ||
| ) |
ad9144_spi_check_status
◆ ad9144_spi_read()
| int32_t ad9144_spi_read | ( | struct ad9144_dev * | dev, |
| uint16_t | reg_addr, | ||
| uint8_t * | reg_data | ||
| ) |
ad9144_spi_read
◆ ad9144_spi_write()
| int32_t ad9144_spi_write | ( | struct ad9144_dev * | dev, |
| uint16_t | reg_addr, | ||
| uint8_t | reg_data | ||
| ) |
ad9144_spi_write
◆ ad9144_spi_write_seq()
| int32_t ad9144_spi_write_seq | ( | struct ad9144_dev * | dev, |
| const struct ad9144_reg_seq * | seq, | ||
| uint32_t | num | ||
| ) |
◆ ad9144_status()
| int32_t ad9144_status | ( | struct ad9144_dev * | dev | ) |
ad9144_status - return the status of the JESD interface
