ADXL313 Device structure. More...
#include <adxl313.h>
Public Attributes | |
| union adxl313_comm_desc | com_desc |
| enum adxl313_comm_type | comm_type |
| enum adxl313_type | dev_type |
| enum adxl313_range | range |
| enum adxl313_resolution | resolution |
| enum adxl313_op_mode | op_mode |
| enum adxl313_lp_mode | lp_mode |
| enum adxl313_odr | odr |
| uint8_t | x_offset_raw |
| uint8_t | y_offset_raw |
| uint8_t | z_offset_raw |
| int64_t | scale_factor_mult |
| enum adxl313_fifo_mode | fifo_mode |
| uint8_t | fifo_samples |
| uint8_t | act_thr |
| uint8_t | inact_thr |
| uint8_t | time_inact |
| union adxl313_act_inact_ctl_flags | act_inact_ctl |
| uint8_t | comm_buff [24] |
Detailed Description
ADXL313 Device structure.
Member Data Documentation
◆ act_inact_ctl
| union adxl313_act_inact_ctl_flags adxl313_dev::act_inact_ctl |
The contents of the ACT_INACT_CTL register
◆ act_thr
| uint8_t adxl313_dev::act_thr |
Threshold value for detecting activity, raw data
◆ com_desc
| union adxl313_comm_desc adxl313_dev::com_desc |
Device communication descriptor
◆ comm_buff
| uint8_t adxl313_dev::comm_buff[24] |
Buffer used for communication with ADXL313
◆ comm_type
| enum adxl313_comm_type adxl313_dev::comm_type |
Device Communication type: ADXL313_SPI_COMM, ADXL313_I2C_COMM
◆ dev_type
| enum adxl313_type adxl313_dev::dev_type |
Device type
◆ fifo_mode
| enum adxl313_fifo_mode adxl313_dev::fifo_mode |
ADXL313 FIFO mode selection
◆ fifo_samples
| uint8_t adxl313_dev::fifo_samples |
Number of FISO samples before FIFO event signalling
◆ inact_thr
| uint8_t adxl313_dev::inact_thr |
Threshold value for detecting inactivity, raw data
◆ lp_mode
| enum adxl313_lp_mode adxl313_dev::lp_mode |
ADXL313 LOW POOWER operation mode (NONE, ON, or AUTOSLEEP)
◆ odr
| enum adxl313_odr adxl313_dev::odr |
ADXL313 output data rate
◆ op_mode
| enum adxl313_op_mode adxl313_dev::op_mode |
ADXL313 operation mode, STDBY or MEASURE
◆ range
| enum adxl313_range adxl313_dev::range |
ADXL313 measurement range
◆ resolution
| enum adxl313_resolution adxl313_dev::resolution |
ADXL313 resolution
◆ scale_factor_mult
| int64_t adxl313_dev::scale_factor_mult |
Scale factor multiplier for data conversion to m/s^2
◆ time_inact
| uint8_t adxl313_dev::time_inact |
Amount of time for inactivity to be declared
◆ x_offset_raw
| uint8_t adxl313_dev::x_offset_raw |
User-set offset adjustments on the X axis in twos complement format with a scale factor depending on device
◆ y_offset_raw
| uint8_t adxl313_dev::y_offset_raw |
User-set offset adjustments on the Y axis in twos complement format with a scale factor depending on device
◆ z_offset_raw
| uint8_t adxl313_dev::z_offset_raw |
User-set offset adjustments on the Z axis in twos complement format with a scale factor depending on device
The documentation for this struct was generated from the following file:
- drivers/accel/adxl313/adxl313.h
