Definitions specific to STM32 platform used by eval-ad400x project. More...

#include "stm32_hal.h"
#include "stm32_irq.h"
#include "stm32_gpio_irq.h"
#include "stm32_spi.h"
#include "stm32_gpio.h"
#include "stm32_uart.h"
#include "stm32_uart_stdio.h"

Include dependency graph for parameters.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros
#define	SAMPLES_PER_CHANNEL_PLATFORM 2000

#define	MAX_SIZE_BASE_ADDR (SAMPLES_PER_CHANNEL_PLATFORM * sizeof(uint32_t))

#define	ADC_DDR_BASEADDR in_buff

#define	UART_IRQ_ID UART5_IRQn

#define	UART_DEVICE_ID 5

#define	UART_BAUDRATE 230400

#define	UART_EXTRA &ad400x_uart_extra_ip

#define	UART_OPS &stm32_uart_ops

#define	SPI_DEVICE_ID 1

#define	SPI_BAUDRATE 20000000

#define	SPI_CS 14

#define	SPI_CS_PORT GPIO_PORT_A

#define	SPI_OPS &stm32_spi_ops

#define	SPI_EXTRA &ad400x_spi_extra_ip

#define	GPIO_CNV 15

#define	GPIO_OPS &stm32_gpio_ops

#define	GPIO_CNV_PORT GPIO_PORT_A

#define	GPIO_PORT_A 0

#define	AD400X_ADC_REF_VOLTAGE 5000

Variables
UART_HandleTypeDef	huart5

uint8_t	in_buff []

struct stm32_uart_init_param	ad400x_uart_extra_ip

struct stm32_spi_init_param	ad400x_spi_extra_ip

Detailed Description

Definitions specific to STM32 platform used by eval-ad400x project.

Author: Axel Haslam (ahasl.nosp@m.am@b.nosp@m.aylib.nosp@m.re.c.nosp@m.om)

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of Analog Devices, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
The use of this software may or may not infringe the patent rights of one or more patent holders. This license does not release you from the requirement that you obtain separate licenses from these patent holders to use this software.
Use of the software either in source or binary form, must be run on or directly connected to an Analog Devices Inc. component.

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Macro Definition Documentation

◆ AD400X_ADC_REF_VOLTAGE

#define AD400X_ADC_REF_VOLTAGE 5000

◆ ADC_DDR_BASEADDR

#define ADC_DDR_BASEADDR in_buff

◆ GPIO_CNV

#define GPIO_CNV 15

◆ GPIO_CNV_PORT

#define GPIO_CNV_PORT GPIO_PORT_A

◆ GPIO_OPS

#define GPIO_OPS &stm32_gpio_ops

◆ GPIO_PORT_A

#define GPIO_PORT_A 0

◆ MAX_SIZE_BASE_ADDR

#define MAX_SIZE_BASE_ADDR (SAMPLES_PER_CHANNEL_PLATFORM * sizeof(uint32_t))

◆ SAMPLES_PER_CHANNEL_PLATFORM

#define SAMPLES_PER_CHANNEL_PLATFORM 2000

◆ SPI_BAUDRATE

#define SPI_BAUDRATE 20000000

◆ SPI_CS

#define SPI_CS 14

◆ SPI_CS_PORT

#define SPI_CS_PORT GPIO_PORT_A

◆ SPI_DEVICE_ID

#define SPI_DEVICE_ID 1

◆ SPI_EXTRA

#define SPI_EXTRA &ad400x_spi_extra_ip

◆ SPI_OPS

#define SPI_OPS &stm32_spi_ops

◆ UART_BAUDRATE

#define UART_BAUDRATE 230400

◆ UART_DEVICE_ID

#define UART_DEVICE_ID 5

◆ UART_EXTRA

#define UART_EXTRA &ad400x_uart_extra_ip

◆ UART_IRQ_ID

#define UART_IRQ_ID UART5_IRQn

◆ UART_OPS

#define UART_OPS &stm32_uart_ops

Variable Documentation

◆ ad400x_spi_extra_ip

struct stm32_spi_init_param ad400x_spi_extra_ip

◆ ad400x_uart_extra_ip

struct stm32_uart_init_param ad400x_uart_extra_ip

◆ huart5

UART_HandleTypeDef huart5

◆ in_buff

uint8_t in_buff[]

Macros

Variables