common_data.c File Reference

Defines common data to be used by ad469x examples. More...

#include "common_data.h"

Include dependency graph for common_data.c:

Variables
struct no_os_uart_init_param	ad4692_uart_ip
struct no_os_spi_init_param	ad4692_spi_ip
struct no_os_gpio_init_param	ad4692_gpio0_ip
struct no_os_gpio_init_param	ad4692_reset_ip
struct no_os_pwm_init_param	ad4692_pwm_ip
struct no_os_irq_init_param	ad4692_gpio_irq_ip
struct ad4692_init_param	ad4692_ip

Detailed Description

Defines common data to be used by ad469x examples.

Author

Radu Sabau (radu..nosp@m.saba.nosp@m.u@ana.nosp@m.log..nosp@m.com)

Copyright 2025(c) Analog Devices, Inc.

SPDX-License-Identifier: BSD-3-Clause

Variable Documentation

ad4692_gpio0_ip

struct no_os_gpio_init_param ad4692_gpio0_ip

Initial value:

= {
    .port = GPIO_DREADY_PORT_NUM,
    .pull = NO_OS_PULL_NONE,
    .number = GPIO_DREADY_PIN_NUM,
    .platform_ops = GPIO_OPS,
    .extra = GPIO_EXTRA,
}

ad4692_gpio_irq_ip

struct no_os_irq_init_param ad4692_gpio_irq_ip

Initial value:

= {
    .irq_ctrl_id = GPIO_IRQ_ID,
    .platform_ops = GPIO_IRQ_OPS,
    .extra = GPIO_IRQ_EXTRA,
}

ad4692_ip

struct ad4692_init_param ad4692_ip

Initial value:

= {
    .comm_param = &ad4692_spi_ip,
    .conv_param = &ad4692_pwm_ip,
    .gpio0_param = &ad4692_gpio0_ip,
    .reset_param = &ad4692_reset_ip,
    .id = ID_AD4692,
    .mode = AD4692_MANUAL_MODE,
    .vref = 5000000,
}

ad4692_pwm_ip

struct no_os_pwm_init_param ad4692_pwm_ip

Initial value:

= {
    .id = PWM_ID,
    .polarity = NO_OS_PWM_POLARITY_LOW,
    .platform_ops = PWM_OPS,
    .period_ns = 28000,
    .duty_cycle_ns = 210,
    .extra = PWM_EXTRA,
}

ad4692_reset_ip

struct no_os_gpio_init_param ad4692_reset_ip

Initial value:

= {
    .port = GPIO_RESET_PORT_NUM,
    .pull = NO_OS_PULL_NONE,
    .number = GPIO_RESET_PIN_NUM,
    .platform_ops = GPIO_OPS,
    .extra = GPIO_EXTRA,
}

ad4692_spi_ip

struct no_os_spi_init_param ad4692_spi_ip

Initial value:

= {
    .device_id = SPI_DEVICE_ID,
    .extra = SPI_EXTRA,
    .max_speed_hz = SPI_BAUDRATE,
    .platform_ops = SPI_OPS,
    .chip_select = SPI_CS,
    .mode = NO_OS_SPI_MODE_3,
}

ad4692_uart_ip

struct no_os_uart_init_param ad4692_uart_ip

Initial value:

= {
    .device_id = UART_DEVICE_ID,
    .irq_id = UART_IRQ_ID,
    .asynchronous_rx = true,
    .baud_rate = UART_BAUDRATE,
    .size = NO_OS_UART_CS_8,
    .platform_ops = UART_OPS,
    .parity = NO_OS_UART_PAR_NO,
    .stop = NO_OS_UART_STOP_1_BIT,
    .extra = UART_EXTRA,
}