Header file of AD5761R Driver. More...

#include <stdint.h>
#include "no_os_gpio.h"
#include "no_os_spi.h"

Include dependency graph for ad5761r.h:

Classes
struct	ad5761r_dev

struct	ad5761r_init_param

Macros
#define	AD5761R_INPUT_ZERO_BIT (1 << 20)

#define	AD5761R_INPUT_ADDR_CMD(x)

#define	AD5761R_INPUT_DATA(x)

#define	AD5761R_DATA(x)

#define	AD5721R_DATA(x)

#define	CMD_NOP 0x0

#define	CMD_WR_TO_INPUT_REG 0x1

#define	CMD_UPDATE_DAC_REG 0x2

#define	CMD_WR_UPDATE_DAC_REG 0x3

#define	CMD_WR_CTRL_REG 0x4

#define	CMD_NOP_ALT_1 0x5

#define	CMD_NOP_ALT_2 0x6

#define	CMD_SW_DATA_RESET 0x7

#define	CMD_RESERVED 0x8

#define	CMD_DIS_DAISY_CHAIN 0x9

#define	CMD_RD_INPUT_REG 0xA

#define	CMD_RD_DAC_REG 0xB

#define	CMD_RD_CTRL_REG 0xC

#define	CMD_NOP_ALT_3 0xD

#define	CMD_NOP_ALT_4 0xE

#define	CMD_SW_FULL_RESET 0xF

#define	AD5761R_CTRL_SC (1 << 12)

#define	AD5761R_CTRL_BO (1 << 11)

#define	AD5761R_CTRL_CV(x)

#define	AD5761R_CTRL_OVR (1 << 8)

#define	AD5761R_CTRL_B2C (1 << 7)

#define	AD5761R_CTRL_ETS (1 << 6)

#define	AD5761R_CTRL_IRO (1 << 5)

#define	AD5761R_CTRL_PV(x)

#define	AD5761R_CTRL_RA(x)

#define	AD5761R_DIS_DAISY_CHAIN_DDC(x)

Enumerations
enum	ad5761r_type { AD5761R , AD5721R }

enum	ad5761r_reg { AD5761R_REG_INPUT , AD5761R_REG_DAC , AD5761R_REG_CTRL }

enum	ad5761r_scale { AD5761R_SCALE_ZERO , AD5761R_SCALE_HALF , AD5761R_SCALE_FULL }

enum	ad5761r_range { AD5761R_RANGE_M_10V_TO_P_10V , AD5761R_RANGE_0_V_TO_P_10V , AD5761R_RANGE_M_5V_TO_P_5V , AD5761R_RANGE_0V_TO_P_5V , AD5761R_RANGE_M_2V5_TO_P_7V5 , AD5761R_RANGE_M_3V_TO_P_3V , AD5761R_RANGE_0V_TO_P_16V , AD5761R_RANGE_0V_TO_P_20V }

Functions
int32_t	ad5761r_init (struct ad5761r_dev **device, struct ad5761r_init_param init_param)

int32_t	ad5761r_remove (struct ad5761r_dev *dev)
	Free the resources allocated by ad5761r_init().

int32_t	ad5761r_write (struct ad5761r_dev *dev, uint8_t reg_addr_cmd, uint16_t reg_data)

int32_t	ad5761r_read (struct ad5761r_dev dev, uint8_t reg_addr_cmd, uint16_t reg_data)

int32_t	ad5761r_register_readback (struct ad5761r_dev dev, enum ad5761r_reg reg, uint16_t reg_data)

int32_t	ad5761r_config (struct ad5761r_dev *dev)

int32_t	ad5761r_set_daisy_chain_en_dis (struct ad5761r_dev *dev, bool en_dis)

int32_t	ad5761r_get_daisy_chain_en_dis (struct ad5761r_dev dev, bool en_dis)

int32_t	ad5761r_set_output_range (struct ad5761r_dev *dev, enum ad5761r_range out_range)

int32_t	ad5761r_get_output_range (struct ad5761r_dev dev, enum ad5761r_range out_range)

int32_t	ad5761r_set_power_up_voltage (struct ad5761r_dev *dev, enum ad5761r_scale pv)

int32_t	ad5761r_get_power_up_voltage (struct ad5761r_dev dev, enum ad5761r_scale pv)

int32_t	ad5761r_set_clear_voltage (struct ad5761r_dev *dev, enum ad5761r_scale cv)

int32_t	ad5761r_get_clear_voltage (struct ad5761r_dev dev, enum ad5761r_scale cv)

int32_t	ad5761r_set_internal_reference_en_dis (struct ad5761r_dev *dev, bool en_dis)

int32_t	ad5761r_get_internal_reference_en_dis (struct ad5761r_dev dev, bool en_dis)

int32_t	ad5761r_set_exceed_temp_shutdown_en_dis (struct ad5761r_dev *dev, bool en_dis)

int32_t	ad5761r_get_exceed_temp_shutdown_en_dis (struct ad5761r_dev dev, bool en_dis)

int32_t	ad5761r_set_2c_bipolar_range_en_dis (struct ad5761r_dev *dev, bool en_dis)

int32_t	ad5761r_get_2c_bipolar_range_en_dis (struct ad5761r_dev dev, bool en_dis)

int32_t	ad5761r_set_overrange_en_dis (struct ad5761r_dev *dev, bool en_dis)

int32_t	ad5761r_get_overrange_en_dis (struct ad5761r_dev dev, bool en_dis)

int32_t	ad5761r_get_short_circuit_condition (struct ad5761r_dev dev, bool sc)

int32_t	ad5761r_get_brownout_condition (struct ad5761r_dev dev, bool bo)

int32_t	ad5761r_set_reset_pin (struct ad5761r_dev *dev, uint8_t value)

int32_t	ad5761r_get_reset_pin (struct ad5761r_dev dev, uint8_t value)

int32_t	ad5761r_set_clr_pin (struct ad5761r_dev *dev, uint8_t value)

int32_t	ad5761r_get_clr_pin (struct ad5761r_dev dev, uint8_t value)

int32_t	ad5761r_set_ldac_pin (struct ad5761r_dev *dev, uint8_t value)

int32_t	ad5761r_get_ldac_pin (struct ad5761r_dev dev, uint8_t value)

int32_t	ad5761r_write_input_register (struct ad5761r_dev *dev, uint16_t reg_data)

int32_t	ad5761r_update_dac_register (struct ad5761r_dev *dev)

int32_t	ad5761r_write_update_dac_register (struct ad5761r_dev *dev, uint16_t reg_data)

int32_t	ad5761r_software_data_reset (struct ad5761r_dev *dev)

int32_t	ad5761r_software_full_reset (struct ad5761r_dev *dev)

Detailed Description

Header file of AD5761R Driver.

Author: DBogdan (drago.nosp@m.s.bo.nosp@m.gdan@.nosp@m.anal.nosp@m.og.co.nosp@m.m)

SPDX-License-Identifier: BSD-3-Clause

Macro Definition Documentation

◆ AD5721R_DATA

#define AD5721R_DATA ( x )

Value:

(((x) & 0xFFF) << 4)

◆ AD5761R_CTRL_B2C

#define AD5761R_CTRL_B2C (1 << 7)

◆ AD5761R_CTRL_BO

#define AD5761R_CTRL_BO (1 << 11)

◆ AD5761R_CTRL_CV

#define AD5761R_CTRL_CV ( x )

Value:

(((x) & 0x3) << 9)

◆ AD5761R_CTRL_ETS

#define AD5761R_CTRL_ETS (1 << 6)

◆ AD5761R_CTRL_IRO

#define AD5761R_CTRL_IRO (1 << 5)

◆ AD5761R_CTRL_OVR

#define AD5761R_CTRL_OVR (1 << 8)

◆ AD5761R_CTRL_PV

#define AD5761R_CTRL_PV ( x )

Value:

(((x) & 0x3) << 3)

◆ AD5761R_CTRL_RA

#define AD5761R_CTRL_RA ( x )

Value:

(((x) & 0x7) << 0)

◆ AD5761R_CTRL_SC

#define AD5761R_CTRL_SC (1 << 12)

◆ AD5761R_DATA

#define AD5761R_DATA ( x )

Value:

(((x) & 0xFFFF) << 0)

◆ AD5761R_DIS_DAISY_CHAIN_DDC

#define AD5761R_DIS_DAISY_CHAIN_DDC ( x )

Value:

(((x) & 0x1) << 0)

◆ AD5761R_INPUT_ADDR_CMD

#define AD5761R_INPUT_ADDR_CMD ( x )

Value:

(((x) & 0xF) << 16)

◆ AD5761R_INPUT_DATA

#define AD5761R_INPUT_DATA ( x )

Value:

(((x) & 0xFFFF) << 0)

◆ AD5761R_INPUT_ZERO_BIT

#define AD5761R_INPUT_ZERO_BIT (1 << 20)

◆ CMD_DIS_DAISY_CHAIN

#define CMD_DIS_DAISY_CHAIN 0x9

◆ CMD_NOP

#define CMD_NOP 0x0

◆ CMD_NOP_ALT_1

#define CMD_NOP_ALT_1 0x5

◆ CMD_NOP_ALT_2

#define CMD_NOP_ALT_2 0x6

◆ CMD_NOP_ALT_3

#define CMD_NOP_ALT_3 0xD

◆ CMD_NOP_ALT_4

#define CMD_NOP_ALT_4 0xE

◆ CMD_RD_CTRL_REG

#define CMD_RD_CTRL_REG 0xC

◆ CMD_RD_DAC_REG

#define CMD_RD_DAC_REG 0xB

◆ CMD_RD_INPUT_REG

#define CMD_RD_INPUT_REG 0xA

◆ CMD_RESERVED

#define CMD_RESERVED 0x8

◆ CMD_SW_DATA_RESET

#define CMD_SW_DATA_RESET 0x7

◆ CMD_SW_FULL_RESET

#define CMD_SW_FULL_RESET 0xF

◆ CMD_UPDATE_DAC_REG

#define CMD_UPDATE_DAC_REG 0x2

◆ CMD_WR_CTRL_REG

#define CMD_WR_CTRL_REG 0x4

◆ CMD_WR_TO_INPUT_REG

#define CMD_WR_TO_INPUT_REG 0x1

◆ CMD_WR_UPDATE_DAC_REG

#define CMD_WR_UPDATE_DAC_REG 0x3

Enumeration Type Documentation

◆ ad5761r_range

enum ad5761r_range

Enumerator
AD5761R_RANGE_M_10V_TO_P_10V
AD5761R_RANGE_0_V_TO_P_10V
AD5761R_RANGE_M_5V_TO_P_5V
AD5761R_RANGE_0V_TO_P_5V
AD5761R_RANGE_M_2V5_TO_P_7V5
AD5761R_RANGE_M_3V_TO_P_3V
AD5761R_RANGE_0V_TO_P_16V
AD5761R_RANGE_0V_TO_P_20V

◆ ad5761r_reg

enum ad5761r_reg

Enumerator
AD5761R_REG_INPUT
AD5761R_REG_DAC
AD5761R_REG_CTRL

◆ ad5761r_scale

enum ad5761r_scale

Enumerator
AD5761R_SCALE_ZERO
AD5761R_SCALE_HALF
AD5761R_SCALE_FULL

◆ ad5761r_type

enum ad5761r_type

Enumerator
AD5761R
AD5721R

Function Documentation

◆ ad5761r_config()

int32_t ad5761r_config ( struct ad5761r_dev * dev )

Configure the part based on the settings stored in the device structure.

Parameters

dev	- The device structure.

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_get_2c_bipolar_range_en_dis()

int32_t ad5761r_get_2c_bipolar_range_en_dis	(	struct ad5761r_dev *	dev,
		bool *	en_dis )

Get the status of the twos complement bipolar output range.

Parameters

dev	- The device structure.
en_dis	- The status of the twos complement bipolar output range (enabled, disabled).

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_get_brownout_condition()

int32_t ad5761r_get_brownout_condition	(	struct ad5761r_dev *	dev,
		bool *	bo )

Get the brownout condition. Note: The condition is reset at every control register write.

Parameters

dev	- The device structure.
bo	- The status of the brownout condition (detected, not detected).

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_get_clear_voltage()

int32_t ad5761r_get_clear_voltage	(	struct ad5761r_dev *	dev,
		enum ad5761r_scale *	cv )

Get the clear voltage.

Parameters

dev	- The device structure.
cv	- The clear voltage.

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_get_clr_pin()

int32_t ad5761r_get_clr_pin	(	struct ad5761r_dev *	dev,
		uint8_t *	value )

Get the clr pin value.

Parameters

dev	- The device structure.
value	- The pin value.

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_get_daisy_chain_en_dis()

int32_t ad5761r_get_daisy_chain_en_dis	(	struct ad5761r_dev *	dev,
		bool *	en_dis )

Get the status of the daisy-chain mode.

Parameters

dev	- The device structure.
en_dis	- The status of the daisy-chain mode (enabled, disabled).

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_get_exceed_temp_shutdown_en_dis()

int32_t ad5761r_get_exceed_temp_shutdown_en_dis	(	struct ad5761r_dev *	dev,
		bool *	en_dis )

Get the status of the ETS (exceed temperature shutdown) function.

Parameters

dev	- The device structure.
en_dis	- The status of the ETS function (enabled, disabled).

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_get_internal_reference_en_dis()

int32_t ad5761r_get_internal_reference_en_dis	(	struct ad5761r_dev *	dev,
		bool *	en_dis )

Get the status of the internal reference.

Parameters

dev	- The device structure.
en_dis	- The status of the internal reference (enabled, disabled).

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_get_ldac_pin()

int32_t ad5761r_get_ldac_pin	(	struct ad5761r_dev *	dev,
		uint8_t *	value )

Get the ldac pin value.

Parameters

dev	- The device structure.
value	- The pin value.

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_get_output_range()

int32_t ad5761r_get_output_range	(	struct ad5761r_dev *	dev,
		enum ad5761r_range *	out_range )

Get the output_range.

Parameters

dev	- The device structure.
out_range	- The output range values.

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_get_overrange_en_dis()

int32_t ad5761r_get_overrange_en_dis	(	struct ad5761r_dev *	dev,
		bool *	en_dis )

Get the status of the 5% overrange.

Parameters

dev	- The device structure.
en_dis	- The status of the twos 5% overrange (enabled, disabled).

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_get_power_up_voltage()

int32_t ad5761r_get_power_up_voltage	(	struct ad5761r_dev *	dev,
		enum ad5761r_scale *	pv )

Get the power up voltage.

Parameters

dev	- The device structure.
pv	- The power up voltage.

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_get_reset_pin()

int32_t ad5761r_get_reset_pin	(	struct ad5761r_dev *	dev,
		uint8_t *	value )

Get the reset pin value.

Parameters

dev	- The device structure.
value	- The pin value.

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_get_short_circuit_condition()

int32_t ad5761r_get_short_circuit_condition	(	struct ad5761r_dev *	dev,
		bool *	sc )

Get the short-circuit condition. Note: The condition is reset at every control register write.

Parameters

dev	- The device structure.
sc	- The status of the short-circuit condition (detected, not detected).

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_init()

int32_t ad5761r_init	(	struct ad5761r_dev **	device,
		struct ad5761r_init_param	init_param )

Initialize the device.

Parameters

device	- The device structure.
init_param	- The structure that contains the device initial parameters.

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_read()

int32_t ad5761r_read	(	struct ad5761r_dev *	dev,
		uint8_t	reg_addr_cmd,
		uint16_t *	reg_data )

SPI read from device.

Parameters

dev	- The device structure.
reg_addr_cmd	- The input shift register command. Accepted values: CMD_NOP CMD_WR_TO_INPUT_REG CMD_UPDATE_DAC_REG_FROM_INPUT_REG CMD_WR_UPDATE_DAC_REG CMD_WR_CTRL_REG CMD_SW_DATA_RESET CMD_DIS_DAISY_CHAIN CMD_RD_INPUT_REG CMD_RD_DAC_REG CMD_RD_CTRL_REG CMD_SW_FULL_RESET
reg_data	- The received data.

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_register_readback()

int32_t ad5761r_register_readback	(	struct ad5761r_dev *	dev,
		enum ad5761r_reg	reg,
		uint16_t *	reg_data )

Readback the register data. Note: Readback operation is not enabled if daisy-chain mode is disabled.

Parameters

dev	- The device structure.
reg	- The register to be read. Accepted values: AD5761R_REG_INPUT AD5761R_REG_DAC AD5761R_REG_CTRL
reg_data	- The register data.

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_remove()

int32_t ad5761r_remove ( struct ad5761r_dev * dev )

Free the resources allocated by ad5761r_init().

Parameters

dev	- The device structure.

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_set_2c_bipolar_range_en_dis()

int32_t ad5761r_set_2c_bipolar_range_en_dis	(	struct ad5761r_dev *	dev,
		bool	en_dis )

Enable/disable the twos complement bipolar output range.

Parameters

dev	- The device structure.
en_dis	- Set true in order to enable the twos complement bipolar output range. Accepted values: true false

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_set_clear_voltage()

int32_t ad5761r_set_clear_voltage	(	struct ad5761r_dev *	dev,
		enum ad5761r_scale	cv )

Set the clear voltage.

Parameters

dev	- The device structure.
cv	- The clear voltage. Accepted values: AD5761R_SCALE_ZERO AD5761R_SCALE_HALF AD5761R_SCALE_FULL

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_set_clr_pin()

int32_t ad5761r_set_clr_pin	(	struct ad5761r_dev *	dev,
		uint8_t	value )

Set the clr pin value.

Parameters

dev	- The device structure.
value	- The pin value. Accepted values: NO_OS_GPIO_LOW NO_OS_GPIO_HIGH

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_set_daisy_chain_en_dis()

int32_t ad5761r_set_daisy_chain_en_dis	(	struct ad5761r_dev *	dev,
		bool	en_dis )

Enable/disable daisy-chain mode.

Parameters

dev	- The device structure.
en_dis	- Set true in order to enable the daisy-chain mode. Accepted values: true false

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_set_exceed_temp_shutdown_en_dis()

int32_t ad5761r_set_exceed_temp_shutdown_en_dis	(	struct ad5761r_dev *	dev,
		bool	en_dis )

Enable/disable ETS (exceed temperature shutdown) function.

Parameters

dev	- The device structure.
en_dis	- Set true in order to enable the ETS function. Accepted values: true false

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_set_internal_reference_en_dis()

int32_t ad5761r_set_internal_reference_en_dis	(	struct ad5761r_dev *	dev,
		bool	en_dis )

Enable/disable internal reference.

Parameters

dev	- The device structure.
en_dis	- Set true in order to enable the internal reference. Accepted values: true false

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_set_ldac_pin()

int32_t ad5761r_set_ldac_pin	(	struct ad5761r_dev *	dev,
		uint8_t	value )

Set the ldac pin value.

Parameters

dev	- The device structure.
value	- The pin value. Accepted values: NO_OS_GPIO_LOW NO_OS_GPIO_HIGH

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_set_output_range()

int32_t ad5761r_set_output_range	(	struct ad5761r_dev *	dev,
		enum ad5761r_range	out_range )

Set the output_range.

Parameters

dev	- The device structure.
out_range	- The output range. Accepted values: AD5761R_RANGE_M_10V_TO_P_10V, AD5761R_RANGE_0_V_TO_P_10V AD5761R_RANGE_M_5V_TO_P_5V AD5761R_RANGE_0V_TO_P_5V AD5761R_RANGE_M_2V5_TO_P_7V5 AD5761R_RANGE_M_3V_TO_P_3V AD5761R_RANGE_0V_TO_P_16V AD5761R_RANGE_0V_TO_P_20V

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_set_overrange_en_dis()

int32_t ad5761r_set_overrange_en_dis	(	struct ad5761r_dev *	dev,
		bool	en_dis )

Enable/disable the 5% overrange.

Parameters

dev	- The device structure.
en_dis	- Set true in order to enable the 5% overrange. Accepted values: true false

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_set_power_up_voltage()

int32_t ad5761r_set_power_up_voltage	(	struct ad5761r_dev *	dev,
		enum ad5761r_scale	pv )

Set the power up voltage.

Parameters

dev	- The device structure.
pv	- The power up voltage. Accepted values: AD5761R_SCALE_ZERO AD5761R_SCALE_HALF AD5761R_SCALE_FULL

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_set_reset_pin()

int32_t ad5761r_set_reset_pin	(	struct ad5761r_dev *	dev,
		uint8_t	value )

Set the reset pin value.

Parameters

dev	- The device structure.
value	- The pin value. Accepted values: NO_OS_GPIO_LOW NO_OS_GPIO_HIGH

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_software_data_reset()

int32_t ad5761r_software_data_reset ( struct ad5761r_dev * dev )

Software data reset.

Parameters

dev	- The device structure.

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_software_full_reset()

int32_t ad5761r_software_full_reset ( struct ad5761r_dev * dev )

Software full reset.

Parameters

dev	- The device structure.

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_update_dac_register()

int32_t ad5761r_update_dac_register ( struct ad5761r_dev * dev )

Update DAC register.

Parameters

dev	- The device structure.

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_write()

int32_t ad5761r_write	(	struct ad5761r_dev *	dev,
		uint8_t	reg_addr_cmd,
		uint16_t	reg_data )

SPI write to device.

Parameters

dev	- The device structure.
reg_addr_cmd	- The input shift register command. Accepted values: CMD_NOP CMD_WR_TO_INPUT_REG CMD_UPDATE_DAC_REG_FROM_INPUT_REG CMD_WR_UPDATE_DAC_REG CMD_WR_CTRL_REG CMD_SW_DATA_RESET CMD_DIS_DAISY_CHAIN CMD_RD_INPUT_REG CMD_RD_DAC_REG CMD_RD_CTRL_REG CMD_SW_FULL_RESET
reg_data	- The transmitted data.

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_write_input_register()

int32_t ad5761r_write_input_register	(	struct ad5761r_dev *	dev,
		uint16_t	dac_data )

Write to input register.

Parameters

dev	- The device structure.
dac_data	- The DAC data.

Returns: 0 in case of success, negative error code otherwise.

◆ ad5761r_write_update_dac_register()

int32_t ad5761r_write_update_dac_register	(	struct ad5761r_dev *	dev,
		uint16_t	dac_data )

Write to input register and update DAC register.

Parameters

dev	- The device structure.
dac_data	- The register data.

Returns: 0 in case of success, negative error code otherwise.

Classes

Macros

Enumerations

Functions

Detailed Description

Macro Definition Documentation

◆ AD5721R_DATA

◆ AD5761R_CTRL_B2C

◆ AD5761R_CTRL_BO

◆ AD5761R_CTRL_CV

◆ AD5761R_CTRL_ETS

◆ AD5761R_CTRL_IRO

◆ AD5761R_CTRL_OVR

◆ AD5761R_CTRL_PV

◆ AD5761R_CTRL_RA

◆ AD5761R_CTRL_SC

◆ AD5761R_DATA

◆ AD5761R_DIS_DAISY_CHAIN_DDC

◆ AD5761R_INPUT_ADDR_CMD

◆ AD5761R_INPUT_DATA

◆ AD5761R_INPUT_ZERO_BIT

◆ CMD_DIS_DAISY_CHAIN

◆ CMD_NOP

◆ CMD_NOP_ALT_1

◆ CMD_NOP_ALT_2

◆ CMD_NOP_ALT_3

◆ CMD_NOP_ALT_4

◆ CMD_RD_CTRL_REG

◆ CMD_RD_DAC_REG

◆ CMD_RD_INPUT_REG

◆ CMD_RESERVED

◆ CMD_SW_DATA_RESET

◆ CMD_SW_FULL_RESET

◆ CMD_UPDATE_DAC_REG

◆ CMD_WR_CTRL_REG

◆ CMD_WR_TO_INPUT_REG

◆ CMD_WR_UPDATE_DAC_REG

Enumeration Type Documentation

◆ ad5761r_range

◆ ad5761r_reg

◆ ad5761r_scale

◆ ad5761r_type

Function Documentation

◆ ad5761r_config()

◆ ad5761r_get_2c_bipolar_range_en_dis()

◆ ad5761r_get_brownout_condition()

◆ ad5761r_get_clear_voltage()

◆ ad5761r_get_clr_pin()

◆ ad5761r_get_daisy_chain_en_dis()

◆ ad5761r_get_exceed_temp_shutdown_en_dis()

◆ ad5761r_get_internal_reference_en_dis()

◆ ad5761r_get_ldac_pin()

◆ ad5761r_get_output_range()

◆ ad5761r_get_overrange_en_dis()

◆ ad5761r_get_power_up_voltage()

◆ ad5761r_get_reset_pin()

◆ ad5761r_get_short_circuit_condition()

◆ ad5761r_init()

◆ ad5761r_read()

◆ ad5761r_register_readback()

◆ ad5761r_remove()

◆ ad5761r_set_2c_bipolar_range_en_dis()

◆ ad5761r_set_clear_voltage()

◆ ad5761r_set_clr_pin()

◆ ad5761r_set_daisy_chain_en_dis()

◆ ad5761r_set_exceed_temp_shutdown_en_dis()

◆ ad5761r_set_internal_reference_en_dis()

◆ ad5761r_set_ldac_pin()

◆ ad5761r_set_output_range()

◆ ad5761r_set_overrange_en_dis()

◆ ad5761r_set_power_up_voltage()

◆ ad5761r_set_reset_pin()

◆ ad5761r_software_data_reset()

◆ ad5761r_software_full_reset()

◆ ad5761r_update_dac_register()

◆ ad5761r_write()

◆ ad5761r_write_input_register()

◆ ad5761r_write_update_dac_register()