common_data.c File Reference

Defines common data to be used by adf5611 examples. More...

#include "common_data.h"

Include dependency graph for common_data.c:

Variables
struct no_os_uart_init_param	adf5611_uart_ip
struct no_os_spi_init_param	adf5611_spi_ip
struct no_os_i2c_init_param	adf5611_i2c_ip
struct eeprom_24xx32a_init_param	adf5611_eeprom_init_param
struct no_os_eeprom_init_param	adf5611_eeprom_ip
struct adf5611_init_param	adf5611_ip

Detailed Description

Defines common data to be used by adf5611 examples.

Author

Josemene (jude..nosp@m.osem.nosp@m.ene@a.nosp@m.nalo.nosp@m.g.com)

Copyright 2024(c) Analog Devices, Inc.

SPDX-License-Identifier: BSD-3-Clause

Variable Documentation

adf5611_eeprom_init_param

struct eeprom_24xx32a_init_param adf5611_eeprom_init_param

Initial value:

= {
    .i2c_init = &adf5611_i2c_ip,
}

adf5611_eeprom_ip

struct no_os_eeprom_init_param adf5611_eeprom_ip

Initial value:

= {
    .device_id = 5,
    .platform_ops = &eeprom_24xx32a_ops,
    .extra = &adf5611_eeprom_init_param,
}

adf5611_i2c_ip

struct no_os_i2c_init_param adf5611_i2c_ip

Initial value:

= {
    .device_id = I2C_DEVICE_ID,
    .platform_ops = I2C_OPS,
    .max_speed_hz = 100000,
    .extra = I2C_EXTRA,
    .slave_address = 0x54
}

adf5611_ip

struct adf5611_init_param adf5611_ip

Initial value:

= {
    .spi_init = &adf5611_spi_ip,
    .spi4wire = true,
    .cmos_3v3 = false,
    .ref_clk_freq = 122880000,
    .rfout_freq = 12000000000,
    .ref_div = 2,
    .cp_i = 15,
    .bleed_word = 17,
    .ld_count = 12,
    .id = ID_ADF5611,
}

adf5611_spi_ip

struct no_os_spi_init_param adf5611_spi_ip

Initial value:

= {
    .device_id = SPI_DEVICE_ID,
    .max_speed_hz = 1500000,
    .bit_order = NO_OS_SPI_BIT_ORDER_MSB_FIRST,
    .mode = NO_OS_SPI_MODE_0,
    .platform_ops = SPI_OPS,
    .chip_select = SPI_CS,
    .extra = SPI_EXTRA,
}

adf5611_uart_ip

struct no_os_uart_init_param adf5611_uart_ip

Initial value:

= {
    .device_id = UART_DEVICE_ID,
    .irq_id = UART_IRQ_ID,
    .asynchronous_rx = true,
    .baud_rate = UART_BAUDRATE,
    .size = NO_OS_UART_CS_8,
    .parity = NO_OS_UART_PAR_NO,
    .stop = NO_OS_UART_STOP_1_BIT,
    .extra = UART_EXTRA,
    .platform_ops = UART_OPS,
}