Implementation of admv1014 Driver. More...

#include <malloc.h>
#include "admv1014.h"
#include "no_os_error.h"
#include "no_os_alloc.h"

Include dependency graph for admv1014.c:

Functions
int	admv1014_spi_write (struct admv1014_dev *dev, uint8_t reg_addr, uint16_t data)
	Writes data to ADMV1014 over SPI. More...

int	admv1014_spi_read (struct admv1014_dev dev, uint8_t reg_addr, uint16_t data)
	Reads data from ADMV1014 over SPI. More...

int	admv1014_spi_update_bits (struct admv1014_dev *dev, uint8_t reg_addr, uint16_t mask, uint16_t data)
	Update ADMV1014 register. More...

int	admv1014_set_det_prog (struct admv1014_dev *dev, enum admv1014_det_prog det_prog)
	Set Digital Rx Detector. More...

int	admv1014_get_det_prog (struct admv1014_dev dev, enum admv1014_det_prog det_prog)
	Get Digital Rx Detector. More...

int	admv1014_set_bb_amp_gain (struct admv1014_dev *dev, uint8_t gain)
	Set Baseband Amp Gain. More...

int	admv1014_get_bb_amp_gain (struct admv1014_dev dev, uint8_t gain)
	Get Baseband Amp Gain. More...

int	admv1014_set_phase (struct admv1014_dev *dev, uint8_t i_phase, uint8_t q_phase)
	Set LO Amp Phase. More...

int	admv1014_get_phase (struct admv1014_dev dev, uint8_t i_phase, uint8_t *q_phase)
	Get LO Amp Phase. More...

int	admv1014_set_if_amp_gain (struct admv1014_dev *dev, uint8_t i_coarse_gain, uint8_t q_coarse_gain, uint8_t i_fine_gain, uint8_t q_fine_gain)
	Set IF Amp Gain. More...

int	admv1014_get_if_amp_gain (struct admv1014_dev dev, uint8_t i_coarse_gain, uint8_t q_coarse_gain, uint8_t i_fine_gain, uint8_t *q_fine_gain)
	Get IF Amp Gain. More...

int	admv1014_init (struct admv1014_dev *device, struct admv1014_init_param init_param)
	Initializes the admv1014. More...

int	admv1014_remove (struct admv1014_dev *dev)
	ADMV1014 Resources Deallocation. More...

Detailed Description

Implementation of admv1014 Driver.

Author: Antoniu Miclaus (anton.nosp@m.iu.m.nosp@m.iclau.nosp@m.s@an.nosp@m.alog..nosp@m.com)

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of Analog Devices, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Function Documentation

◆ admv1014_get_bb_amp_gain()

int admv1014_get_bb_amp_gain	(	struct admv1014_dev *	dev,
		uint8_t *	gain
	)

Get Baseband Amp Gain.

Parameters

dev	- The device structure.
gain	- Digital Rx Detector gain.

Returns: Returns 0 in case of success or negative error code.

◆ admv1014_get_det_prog()

int admv1014_get_det_prog	(	struct admv1014_dev *	dev,
		enum admv1014_det_prog *	det_prog
	)

Get Digital Rx Detector.

Parameters

dev	- The device structure.
det_prog	- Digital Rx Detector gain.

Returns: Returns 0 in case of success or negative error code.

◆ admv1014_get_if_amp_gain()

int admv1014_get_if_amp_gain	(	struct admv1014_dev *	dev,
		uint8_t *	i_coarse_gain,
		uint8_t *	q_coarse_gain,
		uint8_t *	i_fine_gain,
		uint8_t *	q_fine_gain
	)

Get IF Amp Gain.

Parameters

dev	- The device structure.
i_coarse_gain	- The I coarse gain value.
q_coarse_gain	- The I coarse gain value.
i_fine_gain	- The Q fine gain value.
q_fine_gain	- The Q fine gain value.

Returns: Returns 0 in case of success or negative error code.

◆ admv1014_get_phase()

int admv1014_get_phase	(	struct admv1014_dev *	dev,
		uint8_t *	i_phase,
		uint8_t *	q_phase
	)

Get LO Amp Phase.

Parameters

dev	- The device structure.
i_phase	- The I phase adjust value.
q_phase	- The Q phase adjust value.

Returns: Returns 0 in case of success or negative error code.

◆ admv1014_init()

int admv1014_init	(	struct admv1014_dev **	device,
		struct admv1014_init_param *	init_param
	)

Initializes the admv1014.

Parameters

device	- The device structure.
init_param	- The structure containing the device initial parameters.

Returns: Returns 0 in case of success or negative error code.

◆ admv1014_remove()

int admv1014_remove ( struct admv1014_dev * dev )

ADMV1014 Resources Deallocation.

Parameters

dev	- The device structure.

Returns: Returns 0 in case of success or negative error code otherwise.

◆ admv1014_set_bb_amp_gain()

int admv1014_set_bb_amp_gain	(	struct admv1014_dev *	dev,
		uint8_t	gain
	)

Set Baseband Amp Gain.

Parameters

dev	- The device structure.
gain	- Digital Rx Detector gain.

Returns: Returns 0 in case of success or negative error code.

◆ admv1014_set_det_prog()

int admv1014_set_det_prog	(	struct admv1014_dev *	dev,
		enum admv1014_det_prog	det_prog
	)

Set Digital Rx Detector.

Parameters

dev	- The device structure.
det_prog	- Digital Rx Detector gain.

Returns: Returns 0 in case of success or negative error code.

◆ admv1014_set_if_amp_gain()

int admv1014_set_if_amp_gain	(	struct admv1014_dev *	dev,
		uint8_t	i_coarse_gain,
		uint8_t	q_coarse_gain,
		uint8_t	i_fine_gain,
		uint8_t	q_fine_gain
	)

Set IF Amp Gain.

Parameters

dev	- The device structure.
i_coarse_gain	- The I coarse gain value.
q_coarse_gain	- The I coarse gain value.
i_fine_gain	- The Q fine gain value.
q_fine_gain	- The Q fine gain value.

Returns: Returns 0 in case of success or negative error code.

◆ admv1014_set_phase()

int admv1014_set_phase	(	struct admv1014_dev *	dev,
		uint8_t	i_phase,
		uint8_t	q_phase
	)

Set LO Amp Phase.

Parameters

dev	- The device structure.
i_phase	- The I phase adjust value.
q_phase	- The Q phase adjust value.

Returns: Returns 0 in case of success or negative error code.

◆ admv1014_spi_read()

int admv1014_spi_read	(	struct admv1014_dev *	dev,
		uint8_t	reg_addr,
		uint16_t *	data
	)

Reads data from ADMV1014 over SPI.

Parameters

dev	- The device structure.
reg_addr	- The register address.
data	- Data read from the device.

Returns: Returns 0 in case of success or negative error code otherwise.

Here is the caller graph for this function:

◆ admv1014_spi_update_bits()

int admv1014_spi_update_bits	(	struct admv1014_dev *	dev,
		uint8_t	reg_addr,
		uint16_t	mask,
		uint16_t	data
	)

Update ADMV1014 register.

Parameters

dev	- The device structure.
reg_addr	- The register address.
mask	- Mask for specific register bits to be updated.
data	- Data written to the device (requires prior bit shifting).

Returns: Returns 0 in case of success or negative error code otherwise.

Here is the caller graph for this function:

◆ admv1014_spi_write()

int admv1014_spi_write	(	struct admv1014_dev *	dev,
		uint8_t	reg_addr,
		uint16_t	data
	)

Writes data to ADMV1014 over SPI.

Parameters

dev	- The device structure.
reg_addr	- The register address.
data	- Data value to write.

Returns: Returns 0 in case of success or negative error code otherwise.

Here is the caller graph for this function:

Functions

Detailed Description

Function Documentation

◆ admv1014_get_bb_amp_gain()

◆ admv1014_get_det_prog()

◆ admv1014_get_if_amp_gain()

◆ admv1014_get_phase()

◆ admv1014_init()

◆ admv1014_remove()

◆ admv1014_set_bb_amp_gain()

◆ admv1014_set_det_prog()

◆ admv1014_set_if_amp_gain()

◆ admv1014_set_phase()

◆ admv1014_spi_read()

◆ admv1014_spi_update_bits()

◆ admv1014_spi_write()