no-OS
Variables
common_data.c File Reference

Defines common data to be used by adp1050 examples. More...

#include "common_data.h"
Include dependency graph for common_data.c:

Variables

struct no_os_uart_init_param adp1050_uart_ip
 
struct no_os_i2c_init_param adp1050_i2c_ip
 
struct no_os_gpio_init_param adp1050_pg_alt_ip
 
struct adp1050_init_param adp1050_ip
 

Detailed Description

Defines common data to be used by adp1050 examples.

Author
Radu Sabau (radu..nosp@m.saba.nosp@m.u@ana.nosp@m.log..nosp@m.com)

Copyright 2024(c) Analog Devices, Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Variable Documentation

◆ adp1050_i2c_ip

struct no_os_i2c_init_param adp1050_i2c_ip
Initial value:
= {
.device_id = I2C_DEVICE_ID,
.max_speed_hz = 100000,
.platform_ops = I2C_OPS,
.slave_address = ADP1050_PMBUS_10KOHM_ADDRESS,
.extra = I2C_EXTRA,
}

◆ adp1050_ip

struct adp1050_init_param adp1050_ip
Initial value:
= {
.i2c_param = &adp1050_i2c_ip,
.pg_alt_param = &adp1050_pg_alt_ip,
.flgi_param = NULL,
.syni_param = NULL,
.on_off_config = ADP1050_ON_OFF_DEFAULT_CFG,
}

◆ adp1050_pg_alt_ip

struct no_os_gpio_init_param adp1050_pg_alt_ip
Initial value:
= {
.number = GPIO_PG_ALT_PIN,
.pull = NO_OS_PULL_NONE,
.platform_ops = GPIO_OPS,
.extra = GPIO_EXTRA,
}

◆ adp1050_uart_ip

struct no_os_uart_init_param adp1050_uart_ip
Initial value:
= {
.device_id = UART_DEVICE_ID,
.baud_rate = UART_BAUDRATE,
.size = NO_OS_UART_CS_8,
.parity = NO_OS_UART_PAR_NO,
.platform_ops = UART_OPS,
.extra = UART_EXTRA,
}
GPIO_PG_ALT_PORT
#define GPIO_PG_ALT_PORT
Definition: parameters.h:57
ADP1050_PMBUS_10KOHM_ADDRESS
#define ADP1050_PMBUS_10KOHM_ADDRESS
Definition: adp1050.h:168
NO_OS_UART_STOP_1_BIT
@ NO_OS_UART_STOP_1_BIT
Definition: no_os_uart.h:100
UART_EXTRA
#define UART_EXTRA
Definition: parameters.h:60
I2C_DEVICE_ID
#define I2C_DEVICE_ID
Definition: parameters.h:63
NO_OS_PULL_NONE
@ NO_OS_PULL_NONE
Definition: no_os_gpio.h:72
UART_OPS
#define UART_OPS
Definition: parameters.h:61
GPIO_PG_ALT_PIN
#define GPIO_PG_ALT_PIN
Definition: parameters.h:58
UART_BAUDRATE
#define UART_BAUDRATE
Definition: parameters.h:59
adp1050_pg_alt_ip
struct no_os_gpio_init_param adp1050_pg_alt_ip
Definition: common_data.c:59
NULL
#define NULL
Definition: wrapper.h:64
NO_OS_UART_PAR_NO
@ NO_OS_UART_PAR_NO
Definition: no_os_uart.h:83
adp1050_i2c_ip
struct no_os_i2c_init_param adp1050_i2c_ip
Definition: common_data.c:51
GPIO_OPS
#define GPIO_OPS
Definition: parameters.h:84
UART_DEVICE_ID
#define UART_DEVICE_ID
Definition: parameters.h:58
I2C_EXTRA
#define I2C_EXTRA
Definition: parameters.h:65
I2C_OPS
#define I2C_OPS
Definition: parameters.h:64
NO_OS_UART_CS_8
@ NO_OS_UART_CS_8
Definition: no_os_uart.h:72
GPIO_EXTRA
#define GPIO_EXTRA
Definition: parameters.h:85
ADP1050_ON_OFF_DEFAULT_CFG
#define ADP1050_ON_OFF_DEFAULT_CFG
Definition: adp1050.h:57