Clock setup and initialization routines. More...

#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include "app_config.h"
#include "ad9528.h"
#include "no_os_spi.h"
#include "no_os_gpio.h"
#include "no_os_error.h"
#include "no_os_delay.h"
#include "no_os_util.h"
#include "xil_cache.h"
#include "xilinx_spi.h"
#include "clk_axi_clkgen.h"
#include "xilinx_gpio.h"
#include "parameters.h"
#include "adi_hal.h"
#include "app_talise.h"
#include "app_clocking.h"

Include dependency graph for app_clocking.c:

Functions
adiHalErr_t	clocking_init (uint32_t rx_div40_rate_hz, uint32_t tx_div40_rate_hz, uint32_t rx_os_div40_rate_hz, uint32_t device_clock_khz, uint32_t lmfc_rate_hz)

void	clocking_deinit (void)

Variables
struct ad9528_dev *	clkchip_device

struct axi_clkgen *	rx_clkgen

struct axi_clkgen *	tx_clkgen

struct axi_clkgen *	rx_os_clkgen

Detailed Description

Clock setup and initialization routines.

Author: Darius Berghe (dariu.nosp@m.s.be.nosp@m.rghe@.nosp@m.anal.nosp@m.og.co.nosp@m.m)

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of Analog Devices, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
The use of this software may or may not infringe the patent rights of one or more patent holders. This license does not release you from the requirement that you obtain separate licenses from these patent holders to use this software.
Use of the software either in source or binary form, must be run on or directly connected to an Analog Devices Inc. component.

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Function Documentation

◆ clocking_deinit()

void clocking_deinit ( void )

Here is the caller graph for this function:

◆ clocking_init()

adiHalErr_t clocking_init	(	uint32_t	rx_div40_rate_hz,
		uint32_t	tx_div40_rate_hz,
		uint32_t	rx_os_div40_rate_hz,
		uint32_t	device_clock_khz,
		uint32_t	lmfc_rate_hz
	)

< Insert User System Clock(s) Initialization Code Here > System Clock should provide a device clock and SYSREF signal to the Talise device.

Here is the caller graph for this function:

Variable Documentation

◆ clkchip_device

struct ad9528_dev* clkchip_device

◆ rx_clkgen

struct axi_clkgen* rx_clkgen

◆ rx_os_clkgen

struct axi_clkgen* rx_os_clkgen

◆ tx_clkgen

struct axi_clkgen* tx_clkgen

Functions

Variables