Definitions specific to STM32 platform used by eval-adxrs290-pmdz project. More...

#include "stdio.h"
#include "platform_init.h"
#include "aducm3029_gpio.h"
#include "aducm3029_spi.h"
#include "aducm3029_irq.h"
#include "aducm3029_gpio_irq.h"
#include "aducm3029_timer.h"
#include "aducm3029_uart.h"
#include "no_os_timer.h"

Include dependency graph for parameters.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros
#define	UART_DEVICE_ID 0

#define	INTC_DEVICE_ID 0

#define	UART_IRQ_ID ADUCM_UART_INT_ID

#define	UART_BAUDRATE 115200

#define	UART_EXTRA NULL

#define	UART_OPS &aducm_uart_ops

#define	SPI_DEVICE_ID 1

#define	SPI_BAUDRATE 4000000

#define	SPI_CS 0

#define	SPI_OPS &aducm_spi_ops

#define	SPI_EXTRA &adxrs290_spi_extra_ip

#define	GPIO_SYNC_PIN_NUM 0x10

#define	GPIO_SYNC_PORT_NUM 0

#define	GPIO_OPS &aducm_gpio_ops

#define	GPIO_EXTRA NULL

#define	GPIO_IRQ_ID ADUCM_XINT_SOFT_CTRL /* External interrupt used (to be able to use high level trigger) */

#define	GPIO_IRQ_OPS &aducm_gpio_irq_ops

#define	GPIO_IRQ_EXTRA NULL /* Not used for aducm3029 platform */

#define	ADXRS290_GPIO_TRIG_IRQ_ID ADI_XINT_EVENT_INT1 /* for EVAL-ADICUP3029 pin number 16 is connected to XINT1 */

#define	ADXRS290_GPIO_CB_HANDLE NULL /* Not used for aducm3029 platform */

#define	ADXRS290_TIMER_DEVICE_ID 1

#define	ADXRS290_TIMER_FREQ_HZ 200 /* Not used - Used clock source frequency is the one specified in adxrs290_timer_extra_ip */

#define	ADXRS290_TIMER_TICKS_COUNT 0xffff

#define	ADXRS290_TIMER_EXTRA &adxrs290_timer_extra_ip

#define	TIMER_OPS &aducm_timer_ops

#define	ADXRS290_TIMER_IRQ_ID TMR1_EVT_IRQn /* IRQ id for TMR1 */

#define	TIMER_IRQ_OPS &aducm_irq_ops

#define	ADADXRS290_TIMER_IRQ_EXTRA NULL /* Not used */

#define	ADXRS290_TIMER_CB_HANDLE 0 /* Device descriptor is being used as a handle in this case */

#define	ADXRS290_TIMER_TRIG_IRQ_ID ADUCM_TIMER1_INT_ID

Variables
struct aducm_timer_init_param	adxrs290_timer_extra_ip

struct aducm_spi_init_param	adxrs290_spi_extra_ip

Detailed Description

Definitions specific to STM32 platform used by eval-adxrs290-pmdz project.

Author: RBolboac (ramon.nosp@m.a.bo.nosp@m.lboac.nosp@m.a@an.nosp@m.alog..nosp@m.com)

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of Analog Devices, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Macro Definition Documentation

◆ ADADXRS290_TIMER_IRQ_EXTRA

#define ADADXRS290_TIMER_IRQ_EXTRA NULL /* Not used */

◆ ADXRS290_GPIO_CB_HANDLE

#define ADXRS290_GPIO_CB_HANDLE NULL /* Not used for aducm3029 platform */

◆ ADXRS290_GPIO_TRIG_IRQ_ID

#define ADXRS290_GPIO_TRIG_IRQ_ID ADI_XINT_EVENT_INT1 /* for EVAL-ADICUP3029 pin number 16 is connected to XINT1 */

◆ ADXRS290_TIMER_CB_HANDLE

#define ADXRS290_TIMER_CB_HANDLE 0 /* Device descriptor is being used as a handle in this case */

◆ ADXRS290_TIMER_DEVICE_ID

#define ADXRS290_TIMER_DEVICE_ID 1

◆ ADXRS290_TIMER_EXTRA

#define ADXRS290_TIMER_EXTRA &adxrs290_timer_extra_ip

◆ ADXRS290_TIMER_FREQ_HZ

#define ADXRS290_TIMER_FREQ_HZ 200 /* Not used - Used clock source frequency is the one specified in adxrs290_timer_extra_ip */

◆ ADXRS290_TIMER_IRQ_ID

#define ADXRS290_TIMER_IRQ_ID TMR1_EVT_IRQn /* IRQ id for TMR1 */

◆ ADXRS290_TIMER_TICKS_COUNT

#define ADXRS290_TIMER_TICKS_COUNT 0xffff

◆ ADXRS290_TIMER_TRIG_IRQ_ID

#define ADXRS290_TIMER_TRIG_IRQ_ID ADUCM_TIMER1_INT_ID

◆ GPIO_EXTRA

#define GPIO_EXTRA NULL

◆ GPIO_IRQ_EXTRA

#define GPIO_IRQ_EXTRA NULL /* Not used for aducm3029 platform */

◆ GPIO_IRQ_ID

#define GPIO_IRQ_ID ADUCM_XINT_SOFT_CTRL /* External interrupt used (to be able to use high level trigger) */

◆ GPIO_IRQ_OPS

#define GPIO_IRQ_OPS &aducm_gpio_irq_ops

◆ GPIO_OPS

#define GPIO_OPS &aducm_gpio_ops

◆ GPIO_SYNC_PIN_NUM

#define GPIO_SYNC_PIN_NUM 0x10

◆ GPIO_SYNC_PORT_NUM

#define GPIO_SYNC_PORT_NUM 0

◆ INTC_DEVICE_ID

#define INTC_DEVICE_ID 0

◆ SPI_BAUDRATE

#define SPI_BAUDRATE 4000000

◆ SPI_CS

#define SPI_CS 0

◆ SPI_DEVICE_ID

#define SPI_DEVICE_ID 1

◆ SPI_EXTRA

#define SPI_EXTRA &adxrs290_spi_extra_ip

◆ SPI_OPS

#define SPI_OPS &aducm_spi_ops

◆ TIMER_IRQ_OPS

#define TIMER_IRQ_OPS &aducm_irq_ops

◆ TIMER_OPS

#define TIMER_OPS &aducm_timer_ops

◆ UART_BAUDRATE

#define UART_BAUDRATE 115200

◆ UART_DEVICE_ID

#define UART_DEVICE_ID 0

◆ UART_EXTRA

#define UART_EXTRA NULL

◆ UART_IRQ_ID

#define UART_IRQ_ID ADUCM_UART_INT_ID

◆ UART_OPS

#define UART_OPS &aducm_uart_ops

Variable Documentation

◆ adxrs290_spi_extra_ip

struct aducm_spi_init_param adxrs290_spi_extra_ip

extern

◆ adxrs290_timer_extra_ip

struct aducm_timer_init_param adxrs290_timer_extra_ip