app_talise.h File Reference

Talise initialization and control routines. More...

#include <stdint.h>
#include "talise_types.h"
#include "adi_hal.h"

Include dependency graph for app_talise.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros
#define	TALISE_NUM_SUBCHANNELS   2 /* I - in-phase and Q - quadrature channels */
#define	TALISE_NUM_CHAIN_CHANNELS   2 /* channels per RX/TX chain */
#define	TALISE_NUM_CHANNELS   (TALISE_DEVICE_ID_MAX * TALISE_NUM_CHAIN_CHANNELS * TALISE_NUM_SUBCHANNELS)

Enumerations
enum	taliseDeviceId {   TALISE_A = 0u,   TALISE_DEVICE_ID_MAX }

Functions
adiHalErr_t	talise_setup (taliseDevice_t *const talDev, taliseInit_t *const talInit)
int	talise_multi_chip_sync (taliseDevice_t *pd, int step)
void	talise_shutdown (taliseDevice_t *const pd)
bool	adrv9009_check_sysref_rate (uint32_t lmfc, uint32_t sysref)

Detailed Description

Talise initialization and control routines.

Author

Darius Berghe (dariu.nosp@m.s.be.nosp@m.rghe@.nosp@m.anal.nosp@m.og.co.nosp@m.m)

Copyright 2019(c) Analog Devices, Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

• Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
• Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
• Neither the name of Analog Devices, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
• The use of this software may or may not infringe the patent rights of one or more patent holders. This license does not release you from the requirement that you obtain separate licenses from these patent holders to use this software.
• Use of the software either in source or binary form, must be run on or directly connected to an Analog Devices Inc. component.

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Macro Definition Documentation

TALISE_NUM_CHAIN_CHANNELS

#define TALISE_NUM_CHAIN_CHANNELS   2 /* channels per RX/TX chain */

TALISE_NUM_CHANNELS

#define TALISE_NUM_CHANNELS   (TALISE_DEVICE_ID_MAX * TALISE_NUM_CHAIN_CHANNELS * TALISE_NUM_SUBCHANNELS)

TALISE_NUM_SUBCHANNELS

#define TALISE_NUM_SUBCHANNELS   2 /* I - in-phase and Q - quadrature channels */

Enumeration Type Documentation

taliseDeviceId

enum taliseDeviceId

Enumerator
TALISE_A
TALISE_DEVICE_ID_MAX

Function Documentation

adrv9009_check_sysref_rate()

bool adrv9009_check_sysref_rate	(	uint32_t	lmfc,
		uint32_t	sysref
	)

talise_multi_chip_sync()

int talise_multi_chip_sync	(	taliseDevice_t *	pd,
		int	step
	)

Here is the caller graph for this function:

talise_setup()

adiHalErr_t talise_setup	(	taliseDevice_t *const	talDev,
		taliseInit_t *const	talInit
	)

Set RF PLL LO Frequencies

Here is the caller graph for this function:

talise_shutdown()

void talise_shutdown

(

taliseDevice_t *const

pd

)

Here is the caller graph for this function: