no-OS
Variables
common_data.c File Reference

Defines common data to be used by demo_esp examples. More...

#include "common_data.h"
Include dependency graph for common_data.c:

Variables

struct no_os_uart_init_param uart_ip
 
struct no_os_irq_init_param irq_ip
 
struct no_os_timer_init_param timer_ip
 
struct no_os_gpio_init_param gpio_wifi_rst_ip
 

Detailed Description

Defines common data to be used by demo_esp examples.

Author
Antoniu Miclaus (anton.nosp@m.iu.m.nosp@m.iclau.nosp@m.s@an.nosp@m.alog..nosp@m.com)

Copyright 2023(c) Analog Devices, Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Variable Documentation

◆ gpio_wifi_rst_ip

struct no_os_gpio_init_param gpio_wifi_rst_ip
Initial value:
= {
.port = GPIO_PORT,
.number = GPIO_NR,
.pull = NO_OS_PULL_NONE,
.platform_ops = GPIO_OPS,
.extra = GPIO_EXTRA
}

◆ irq_ip

struct no_os_irq_init_param irq_ip
Initial value:
= {
.irq_ctrl_id = 0,
.platform_ops = IRQ_OPS,
.extra = 0
}

◆ timer_ip

struct no_os_timer_init_param timer_ip
Initial value:
= {
.id = TIMER_ID,
.freq_hz = TIMER_FREQ,
.ticks_count = 0,
.platform_ops = TIMER_OPS,
.extra = TIMER_EXTRA
}

◆ uart_ip

struct no_os_uart_init_param uart_ip
Initial value:
= {
.device_id = UART_DEVICE_ID,
.baud_rate = UART_CONFIG_BAUDRATE,
.irq_id = UART_CONFIG_IRQ_ID,
.asynchronous_rx = true,
.size = NO_OS_UART_CS_8,
.parity = NO_OS_UART_PAR_NO,
.platform_ops = UART_OPS,
.extra = UART_EXTRA
}
GPIO_PORT
#define GPIO_PORT
Definition: parameters.h:62
NO_OS_UART_STOP_1_BIT
@ NO_OS_UART_STOP_1_BIT
Definition: no_os_uart.h:100
UART_EXTRA
#define UART_EXTRA
Definition: parameters.h:60
NO_OS_PULL_NONE
@ NO_OS_PULL_NONE
Definition: no_os_gpio.h:72
UART_CONFIG_IRQ_ID
#define UART_CONFIG_IRQ_ID
Definition: parameters.h:58
GPIO_NR
#define GPIO_NR
Definition: parameters.h:63
UART_OPS
#define UART_OPS
Definition: parameters.h:61
TIMER_ID
#define TIMER_ID
Definition: parameters.h:66
UART_CONFIG_BAUDRATE
#define UART_CONFIG_BAUDRATE
Definition: parameters.h:57
IRQ_OPS
#define IRQ_OPS
Definition: parameters.h:69
NO_OS_UART_PAR_NO
@ NO_OS_UART_PAR_NO
Definition: no_os_uart.h:83
TIMER_FREQ
#define TIMER_FREQ
Definition: parameters.h:67
GPIO_OPS
#define GPIO_OPS
Definition: parameters.h:84
TIMER_EXTRA
#define TIMER_EXTRA
Definition: parameters.h:73
UART_DEVICE_ID
#define UART_DEVICE_ID
Definition: parameters.h:58
TIMER_OPS
#define TIMER_OPS
Definition: parameters.h:71
NO_OS_UART_CS_8
@ NO_OS_UART_CS_8
Definition: no_os_uart.h:72
GPIO_EXTRA
#define GPIO_EXTRA
Definition: parameters.h:85