platform.c File Reference

Defines platform data to be used by ADE7913 example project. More...

#include "platform.h"

Include dependency graph for platform.c:

Functions
int	init_nvic (struct no_os_irq_ctrl_desc **ade7913_nvic_desc)
	Init NVIC.

Variables
struct max_uart_init_param	max_uart_extra_ip
struct max_gpio_init_param	gpio_extra
struct max_spi_init_param	ade7913_spi_extra_ip
struct max_gpio_init_param	ade7913_gpio_extra_ip
struct no_os_uart_init_param	uart_ip
struct no_os_gpio_init_param	gpio_led1_ip
struct no_os_gpio_init_param	ade7913_gpio_rdy_ip
struct no_os_spi_init_param	ade7913_spi_ip0
struct no_os_spi_init_param	ade7913_spi_ip1
struct no_os_spi_init_param	ade7913_spi_ip2
struct no_os_irq_init_param	ade7913_gpio_irq_ip

Detailed Description

Defines platform data to be used by ADE7913 example project.

Author

REtz (radu..nosp@m.etz@.nosp@m.analo.nosp@m.g.co.nosp@m.m)

Copyright (c) 2024 Analog Devices, Inc.

SPDX-License-Identifier: BSD-3-Clause

Function Documentation

init_nvic()

int init_nvic

(

struct no_os_irq_ctrl_desc **

ade7913_nvic_desc

)

Init NVIC.

Parameters

ade7913_nvic_desc

- pointer to the irq nvic descriptor to allocate

Returns

0 in case of success, negative error code otherwise.

Variable Documentation

ade7913_gpio_extra_ip

struct max_gpio_init_param ade7913_gpio_extra_ip

Initial value:

= {
    .vssel = MXC_GPIO_VSSEL_VDDIOH,
}

ade7913_gpio_irq_ip

struct no_os_irq_init_param ade7913_gpio_irq_ip

Initial value:

= {
    .platform_ops = GPIO_IRQ_OPS,
    .irq_ctrl_id = GPIO_CTRL_IRQ_ID,
    .extra = GPIO_IRQ_EXTRA,
}

ade7913_gpio_rdy_ip

struct no_os_gpio_init_param ade7913_gpio_rdy_ip

Initial value:

= {
    .port = GPIO_RDY_PORT,
    .number = GPIO_RDY_PIN,
    .pull = NO_OS_PULL_NONE,
    .platform_ops = &max_gpio_ops,
    .extra = &gpio_extra,
}

ade7913_spi_extra_ip

struct max_spi_init_param ade7913_spi_extra_ip

Initial value:

= {
    .num_slaves = SPI_SLAVE_NUM,
    .polarity = SPI_SS_POL_LOW,
    .vssel = MXC_GPIO_VSSEL_VDDIOH,
}

ade7913_spi_ip0

struct no_os_spi_init_param ade7913_spi_ip0

Initial value:

= {
    .device_id = SPI_DEVICE_ID,
    .max_speed_hz = SPI_BAUDRATE,
    .bit_order = NO_OS_SPI_BIT_ORDER_MSB_FIRST,
    .mode = NO_OS_SPI_MODE_3,
    .platform_ops = &max_spi_ops,
    .chip_select = SPI_CS0,
    .extra = &ade7913_spi_extra_ip,
}

ade7913_spi_ip1

struct no_os_spi_init_param ade7913_spi_ip1

Initial value:

= {
    .device_id = SPI_DEVICE_ID,
    .max_speed_hz = SPI_BAUDRATE,
    .bit_order = NO_OS_SPI_BIT_ORDER_MSB_FIRST,
    .mode = NO_OS_SPI_MODE_3,
    .platform_ops = &max_spi_ops,
    .chip_select = SPI_CS1,
    .extra = &ade7913_spi_extra_ip,
}

ade7913_spi_ip2

struct no_os_spi_init_param ade7913_spi_ip2

Initial value:

= {
    .device_id = SPI_DEVICE_ID,
    .max_speed_hz = SPI_BAUDRATE,
    .bit_order = NO_OS_SPI_BIT_ORDER_MSB_FIRST,
    .mode = NO_OS_SPI_MODE_3,
    .platform_ops = &max_spi_ops,
    .chip_select = SPI_CS2,
    .extra = &ade7913_spi_extra_ip,
}

gpio_extra

struct max_gpio_init_param gpio_extra

Initial value:

= {
    .vssel = MXC_GPIO_VSSEL_VDDIOH,
}

gpio_led1_ip

struct no_os_gpio_init_param gpio_led1_ip

Initial value:

= {
    .port = GPIO_LED_PORT,
    .number = GPIO_LED_PIN,
    .pull = NO_OS_PULL_UP,
    .platform_ops = &max_gpio_ops,
    .extra = &gpio_extra,
}

max_uart_extra_ip

struct max_uart_init_param max_uart_extra_ip

Initial value:

= {
    .flow = MAX_UART_FLOW_DIS
}

uart_ip

struct no_os_uart_init_param uart_ip

Initial value:

= {
    .device_id = UART_DEV_ID,
    .baud_rate = UART_BAUD,
    .size = NO_OS_UART_CS_8,
    .parity = NO_OS_UART_PAR_NO,
    .stop = NO_OS_UART_STOP_1_BIT,
    .platform_ops = &max_uart_ops,
    .extra = &max_uart_extra_ip,
}