common_data.c File Reference

Defines common data to be used by eval-adl8113 project. More...

#include "common_data.h"

Include dependency graph for common_data.c:

Variables
struct no_os_uart_init_param	adl8113_uart_ip
struct no_os_gpio_init_param	led_red_ip
struct no_os_gpio_init_param	led_green_ip
struct no_os_gpio_init_param	led_blue_ip
struct no_os_gpio_init_param	button1_ip
struct no_os_gpio_init_param	button2_ip
struct adl8113_init_param	adl8113_param

Detailed Description

Defines common data to be used by eval-adl8113 project.

Author

Raul Geo Raul..nosp@m.Geor.nosp@m.gian@.nosp@m.anal.nosp@m.og.co.nosp@m.m

Copyright 2026(c) Analog Devices, Inc.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name of Analog Devices, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Variable Documentation

adl8113_param

struct adl8113_init_param adl8113_param

Initial value:

= {
    .gpio_va = {
        .port = GPIO_VA_PORT,
        .number = GPIO_VA_PIN,
        .pull = NO_OS_PULL_NONE,
        .platform_ops = GPIO_OPS,
        .extra = GPIO_EXTRA
    },
    .gpio_vb = {
        .port = GPIO_VB_PORT,
        .number = GPIO_VB_PIN,
        .pull = NO_OS_PULL_NONE,
        .platform_ops = GPIO_OPS,
        .extra = GPIO_EXTRA
    },
    .initial_mode = ADL8113_INTERNAL_AMPLIFIER
}

adl8113_uart_ip

struct no_os_uart_init_param adl8113_uart_ip

Initial value:

= {
    .device_id = UART_DEVICE_ID,
    .irq_id = UART_IRQ_ID,
    .asynchronous_rx = true,
    .baud_rate = UART_BAUDRATE,
    .size = NO_OS_UART_CS_8,
    .parity = NO_OS_UART_PAR_NO,
    .stop = NO_OS_UART_STOP_1_BIT,
    .extra = UART_EXTRA,
    .platform_ops = UART_OPS,
}

button1_ip

struct no_os_gpio_init_param button1_ip

Initial value:

= {
    .port = BUTTON1_PORT,
    .number = BUTTON1_PIN,
    .pull = NO_OS_PULL_UP,
    .platform_ops = GPIO_OPS,
    .extra = GPIO_EXTRA
}

button2_ip

struct no_os_gpio_init_param button2_ip

Initial value:

= {
    .port = BUTTON2_PORT,
    .number = BUTTON2_PIN,
    .pull = NO_OS_PULL_UP,
    .platform_ops = GPIO_OPS,
    .extra = GPIO_EXTRA
}

led_blue_ip

struct no_os_gpio_init_param led_blue_ip

Initial value:

= {
    .port = LED_BLUE_PORT,
    .number = LED_BLUE_PIN,
    .pull = NO_OS_PULL_NONE,
    .platform_ops = GPIO_OPS,
    .extra = GPIO_EXTRA
}

led_green_ip

struct no_os_gpio_init_param led_green_ip

Initial value:

= {
    .port = LED_GREEN_PORT,
    .number = LED_GREEN_PIN,
    .pull = NO_OS_PULL_NONE,
    .platform_ops = GPIO_OPS,
    .extra = GPIO_EXTRA
}

led_red_ip

struct no_os_gpio_init_param led_red_ip

Initial value:

= {
    .port = LED_RED_PORT,
    .number = LED_RED_PIN,
    .pull = NO_OS_PULL_NONE,
    .platform_ops = GPIO_OPS,
    .extra = GPIO_EXTRA
}