no-OS
Variables
common_data.c File Reference

Defines common data to be used by eval-ltc4306-pmdz examples. More...

#include "common_data.h"
Include dependency graph for common_data.c:

Variables

struct no_os_uart_init_param uip
 
const struct no_os_i2c_init_param iip
 
struct ltc4306_init_param ltc4306_user_init = {}
 
struct max538x_init_param max538x_user_init
 

Detailed Description

Defines common data to be used by eval-ltc4306-pmdz examples.

Author
JSanbuen (jose..nosp@m.sanb.nosp@m.uenav.nosp@m.entu.nosp@m.ra@an.nosp@m.alog.nosp@m..com)

Copyright 2023(c) Analog Devices, Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Variable Documentation

◆ iip

const struct no_os_i2c_init_param iip
Initial value:
= {
.device_id = I2C_DEVICE_ID,
.max_speed_hz = 100000,
.platform_ops = I2C_OPS,
.extra = I2C_EXTRA,
}

◆ ltc4306_user_init

struct ltc4306_init_param ltc4306_user_init = {}

◆ max538x_user_init

struct max538x_init_param max538x_user_init
Initial value:
= {
.active_device = MAX_DUT,
}

◆ uip

Initial value:
= {
.device_id = UART_DEVICE_ID,
.irq_id = UART_IRQ_ID,
.asynchronous_rx = true,
.baud_rate = UART_BAUDRATE,
.size = NO_OS_UART_CS_8,
.parity = NO_OS_UART_PAR_NO,
.platform_ops = UART_OPS,
.extra = UART_EXTRA,
}
NO_OS_UART_STOP_1_BIT
@ NO_OS_UART_STOP_1_BIT
Definition: no_os_uart.h:100
UART_EXTRA
#define UART_EXTRA
Definition: parameters.h:60
I2C_DEVICE_ID
#define I2C_DEVICE_ID
Definition: parameters.h:63
UART_OPS
#define UART_OPS
Definition: parameters.h:61
UART_IRQ_ID
#define UART_IRQ_ID
Definition: parameters.h:56
UART_BAUDRATE
#define UART_BAUDRATE
Definition: parameters.h:59
NO_OS_UART_PAR_NO
@ NO_OS_UART_PAR_NO
Definition: no_os_uart.h:83
UART_DEVICE_ID
#define UART_DEVICE_ID
Definition: parameters.h:58
I2C_EXTRA
#define I2C_EXTRA
Definition: parameters.h:65
I2C_OPS
#define I2C_OPS
Definition: parameters.h:64
MAX_DUT
#define MAX_DUT
Definition: basic_example.c:55
NO_OS_UART_CS_8
@ NO_OS_UART_CS_8
Definition: no_os_uart.h:72