common_data.c File Reference

Defines common data to be used by iio_adpd1080 examples. More...

#include "common_data.h"

Include dependency graph for common_data.c:

Variables
struct no_os_uart_init_param	adpd1080_uart_ip
struct adpd188_iio_init_param	adpd1080_iio_ip
struct no_os_timer_init_param	adpd1080_cal_timer_ip
struct no_os_gpio_init_param	adpd1080_sync_gpio_ip
struct no_os_irq_init_param	adpd1080_cal_irq_ip

Detailed Description

Defines common data to be used by iio_adpd1080 examples.

Author

Andrei Drimbarean (andre.nosp@m.i.dr.nosp@m.imbar.nosp@m.ean@.nosp@m.analo.nosp@m.g.co.nosp@m.m)

Copyright 2020(c) Analog Devices, Inc.

SPDX-License-Identifier: BSD-3-Clause

Variable Documentation

adpd1080_cal_irq_ip

struct no_os_irq_init_param adpd1080_cal_irq_ip

Initial value:

= {
    .irq_ctrl_id = GPIO_IRQ_ID,
    .platform_ops = GPIO_IRQ_OPS,
    .extra = GPIO_IRQ_EXTRA,
}

adpd1080_cal_timer_ip

struct no_os_timer_init_param adpd1080_cal_timer_ip

Initial value:

= {
    .id = TIMER_DEVICE_ID,
    .ticks_count = TIMER_TICKS,
    .freq_hz = TIMER_FREQ_HZ,
    .platform_ops = TIMER_OPS,
    .extra = TIMER_EXTRA,
}

adpd1080_iio_ip

struct adpd188_iio_init_param adpd1080_iio_ip

Initial value:

= {
    .drv_init_param = {
        .device = ADPD1080,
        .phy_opt = ADPD188_I2C,
        .phy_init.i2c_phy = {
            .slave_address = I2C_SLAVE_ADDR,
            .max_speed_hz = I2C_BAUDRATE,
            .platform_ops = I2C_OPS,
            .extra = I2C_EXTRA,
        },
        .gpio0_init = {
            .number = 0,
            .platform_ops = GPIO_OPS,
            .extra = GPIO_EXTRA,
        },
        .gpio1_init = {
            .number = 0,
            .platform_ops = GPIO_OPS,
            .extra = GPIO_EXTRA,
        },
    },
}

adpd1080_sync_gpio_ip

struct no_os_gpio_init_param adpd1080_sync_gpio_ip

Initial value:

= {
    .number = GPIO_SYNC_NUM,
    .platform_ops = GPIO_OPS,
    .extra = GPIO_EXTRA,
}

adpd1080_uart_ip

struct no_os_uart_init_param adpd1080_uart_ip

Initial value:

= {
    .device_id = UART_DEVICE_ID,
    .irq_id = UART_IRQ_ID,
    .asynchronous_rx = true,
    .baud_rate = UART_BAUDRATE,
    .size = NO_OS_UART_CS_8,
    .parity = NO_OS_UART_PAR_NO,
    .stop = NO_OS_UART_STOP_1_BIT,
    .extra = UART_EXTRA,
    .platform_ops = UART_OPS,
}