no-OS
Variables
common_data.c File Reference

Defines common data to be used by lt7170 examples. More...

#include "common_data.h"
Include dependency graph for common_data.c:

Variables

struct no_os_uart_init_param lt7170_uart_ip
 
struct no_os_i2c_init_param lt7170_i2c_ip
 
struct lt7170_init_param lt7170_ip
 

Detailed Description

Defines common data to be used by lt7170 examples.

Author
Cherrence Sarip (cherr.nosp@m.ence.nosp@m..sari.nosp@m.p@an.nosp@m.alog..nosp@m.com)

Copyright 2024(c) Analog Devices, Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Variable Documentation

◆ lt7170_i2c_ip

struct no_os_i2c_init_param lt7170_i2c_ip
Initial value:
= {
.device_id = I2C_DEVICE_ID,
.max_speed_hz = 100000,
.platform_ops = I2C_OPS,
.slave_address = LT7170_PMBUS_ADDRESS,
.extra = I2C_EXTRA,
}

◆ lt7170_ip

struct lt7170_init_param lt7170_ip
Initial value:
= {
.i2c_init = &lt7170_i2c_ip,
.pg_param = NULL,
.run_param = NULL,
.alert_param = NULL,
.fault_param = NULL,
.chip_id = ID_LT7170,
.external_clk_en = false,
.crc_en = false,
}

◆ lt7170_uart_ip

struct no_os_uart_init_param lt7170_uart_ip
Initial value:
= {
.device_id = UART_DEVICE_ID,
.irq_id = UART_IRQ_ID,
.asynchronous_rx = true,
.baud_rate = UART_BAUDRATE,
.size = NO_OS_UART_CS_8,
.parity = NO_OS_UART_PAR_NO,
.platform_ops = UART_OPS,
.extra = UART_EXTRA,
}
LT7170_PMBUS_ADDRESS
#define LT7170_PMBUS_ADDRESS
Definition: common_data.h:46
NO_OS_UART_STOP_1_BIT
@ NO_OS_UART_STOP_1_BIT
Definition: no_os_uart.h:94
UART_EXTRA
#define UART_EXTRA
Definition: parameters.h:54
lt7170_i2c_ip
struct no_os_i2c_init_param lt7170_i2c_ip
Definition: common_data.c:53
I2C_DEVICE_ID
#define I2C_DEVICE_ID
Definition: parameters.h:57
UART_OPS
#define UART_OPS
Definition: parameters.h:55
LT7170_FAULT_PIN_OUTPUT
@ LT7170_FAULT_PIN_OUTPUT
Definition: lt7170.h:223
UART_IRQ_ID
#define UART_IRQ_ID
Definition: parameters.h:50
UART_BAUDRATE
#define UART_BAUDRATE
Definition: parameters.h:53
NULL
#define NULL
Definition: wrapper.h:64
NO_OS_UART_PAR_NO
@ NO_OS_UART_PAR_NO
Definition: no_os_uart.h:77
UART_DEVICE_ID
#define UART_DEVICE_ID
Definition: parameters.h:52
I2C_EXTRA
#define I2C_EXTRA
Definition: parameters.h:59
I2C_OPS
#define I2C_OPS
Definition: parameters.h:58
NO_OS_UART_CS_8
@ NO_OS_UART_CS_8
Definition: no_os_uart.h:66
ID_LT7170
@ ID_LT7170
Definition: lt7170.h:215