common_data.c File Reference

#include "common_data.h"
#include "parameters.h"

Include dependency graph for common_data.c:

Variables
struct no_os_uart_init_param	uart_ip
struct max20362_init_param	max20362_ip

Variable Documentation

max20362_ip

struct max20362_init_param max20362_ip

Initial value:

= {
    .i2c_init = {
        .device_id = MAX20362_I2C_DEVICE_ID,
        .max_speed_hz = MAX20362_I2C_CLK_SPEED,
        .slave_address = MAX20362_PMIC_I2C_ADDR,
        .platform_ops = I2C_OPS,
        .extra = (void *)&max20362_i2c_extra,
    },
    .buck_boost_voltage_uv = MAX20362_BBOUT_DEFAULT_UV,
    .cap_voltage_uv = MAX20362_VCAP_DEFAULT_UV,
    .ldo_voltage_uv = MAX20362_LDO_DEFAULT_UV,
    .input_current_limit_ma = MAX20362_ILIM_DEFAULT_MA,
    .bbat_vdrop = MAX20362_BBAT_VDROP_100MV,
    .buck_boost_enable = MAX20362_BBOUT_ENABLE_DEFAULT,
    .ldo_enable = MAX20362_LDO_ENABLE_DEFAULT,
    .dvs_source = MAX20362_DVS_SOURCE_DEFAULT,
}

MAX20362 initialization parameters with default settings

uart_ip

struct no_os_uart_init_param uart_ip

Initial value:

= {
    .device_id             = UART_DEVICE_ID,
    .asynchronous_rx       = UART_ASYNC_RX,
    .baud_rate             = UART_BAUDRATE,
    .size                  = NO_OS_UART_CS_8,
    .parity                = NO_OS_UART_PAR_NO,
    .stop                  = NO_OS_UART_STOP_1_BIT,
    .extra                 = &uart_extra_ip,
    .platform_ops          = UART_OPS,
}

UART initialization parameters for console communication