no-OS
Variables
common_data.c File Reference

Defines common data to be used by max22196 examples. More...

#include "common_data.h"
Include dependency graph for common_data.c:

Variables

struct no_os_uart_init_param max22196_uart_ip
 
struct no_os_spi_init_param max22196_spi_ip
 
struct no_os_gpio_init_param max22196_crc_ip
 
struct max22196_init_param max22196_ip
 

Detailed Description

Defines common data to be used by max22196 examples.

Author
Radu Sabau (radu..nosp@m.saba.nosp@m.u@ana.nosp@m.log..nosp@m.com)

Copyright 2023(c) Analog Devices, Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Variable Documentation

◆ max22196_crc_ip

struct no_os_gpio_init_param max22196_crc_ip
Initial value:
= {
.port = GPIO_CRC_PORT_NUM,
.pull = NO_OS_PULL_NONE,
.number = GPIO_CRC_PIN_NUM,
.platform_ops = GPIO_OPS,
.extra = GPIO_EXTRA
}

◆ max22196_ip

struct max22196_init_param max22196_ip
Initial value:
= {
.comm_param = &max22196_spi_ip,
.crc_param = &max22196_crc_ip,
.crc_en = false,
}

◆ max22196_spi_ip

struct no_os_spi_init_param max22196_spi_ip
Initial value:
= {
.device_id = SPI_DEVICE_ID,
.extra = SPI_EXTRA,
.max_speed_hz = SPI_BAUDRATE,
.platform_ops = SPI_OPS,
.chip_select = SPI_CS,
}

◆ max22196_uart_ip

struct no_os_uart_init_param max22196_uart_ip
Initial value:
= {
.device_id = UART_DEVICE_ID,
.baud_rate = UART_BAUDRATE,
.size = NO_OS_UART_CS_8,
.platform_ops = UART_OPS,
.parity = NO_OS_UART_PAR_NO,
.extra = UART_EXTRA,
}
NO_OS_UART_STOP_1_BIT
@ NO_OS_UART_STOP_1_BIT
Definition: no_os_uart.h:100
max22196_spi_ip
struct no_os_spi_init_param max22196_spi_ip
Definition: common_data.c:51
UART_EXTRA
#define UART_EXTRA
Definition: parameters.h:60
NO_OS_PULL_NONE
@ NO_OS_PULL_NONE
Definition: no_os_gpio.h:72
SPI_EXTRA
#define SPI_EXTRA
Definition: parameters.h:81
max22196_crc_ip
struct no_os_gpio_init_param max22196_crc_ip
Definition: common_data.c:59
UART_OPS
#define UART_OPS
Definition: parameters.h:61
SPI_BAUDRATE
#define SPI_BAUDRATE
Definition: parameters.h:79
UART_BAUDRATE
#define UART_BAUDRATE
Definition: parameters.h:59
SPI_OPS
#define SPI_OPS
Definition: parameters.h:80
SPI_CS
#define SPI_CS
Definition: parameters.h:76
SPI_DEVICE_ID
#define SPI_DEVICE_ID
Definition: parameters.h:75
NO_OS_UART_PAR_NO
@ NO_OS_UART_PAR_NO
Definition: no_os_uart.h:83
GPIO_OPS
#define GPIO_OPS
Definition: parameters.h:84
UART_DEVICE_ID
#define UART_DEVICE_ID
Definition: parameters.h:58
NO_OS_UART_CS_8
@ NO_OS_UART_CS_8
Definition: no_os_uart.h:72
GPIO_EXTRA
#define GPIO_EXTRA
Definition: parameters.h:85