Temperature sensor functionalities. More...

#include <errno.h>
#include "no_os_i2c.h"

Include dependency graph for max31889.h:

This graph shows which files directly or indirectly include this file:

Classes
struct	max31889_desc

struct	max31889_init_param

Macros
#define	MAX31889_REG_STATUS 0x00

#define	MAX31889_REG_INT_ENABLE 0x01

#define	MAX31889_REG_FIFO_WRITE_PTR 0x04

#define	MAX31889_REG_FIFO_READ_PTR 0x05

#define	MAX31889_REG_OVERL_CNT 0x06

#define	MAX31889_REG_DATA_CNT 0x07

#define	MAX31889_REG_FIFO_DATA 0x08

#define	MAX31889_REG_FIFO_CONFIG 0x09

#define	MAX31889_REG_FIFO_CONFIG2 0x0A

#define	MAX31889_REG_SYS_CNTRL 0x0C

#define	MAX31889_REG_ALARM_HIGH_MSB 0x10

#define	MAX31889_REG_ALARM_HIGH_LSB 0x11

#define	MAX31889_REG_ALARM_LOW_MSB 0x12

#define	MAX31889_REG_ALARM_LOW_LSB 0x13

#define	MAX31889_REG_TEMP_SETUP 0x14

#define	MAX31889_REG_GPIO_SETUP 0x20

#define	MAX31889_REG_GPIO_CNTRL 0x21

#define	MAX31889_REG_PART_ID 0xFF

#define	MAX31889_MAX_CONV_STEPS 10

#define	MAX31889_CONV_RATE 0.005

#define	MAX31889_MEASUREMENT_TRIG_VALUE 0xC1

#define	TEMP_MEAS_WAIT_UNTIL_ERROR_MS 1000

Functions
int32_t	max31889_trig_conversion (struct max31889_desc *)

int32_t	max31889_write_reg (struct max31889_desc , uint8_t, uint8_t , uint8_t)

int32_t	max31889_read_reg (struct max31889_desc , uint8_t, uint8_t , uint8_t)

int32_t	max31889_trig_and_read_temp (struct max31889_desc , double )

int32_t	max31889_init (struct max31889_desc *, struct max31889_init_param )

int32_t	max31889_remove (struct max31889_desc *)

Detailed Description

Temperature sensor functionalities.

Author: Robert Budai (rober.nosp@m.t.bu.nosp@m.dai@a.nosp@m.nalo.nosp@m.g.com)

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of Analog Devices, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Macro Definition Documentation

◆ MAX31889_CONV_RATE

#define MAX31889_CONV_RATE 0.005

◆ MAX31889_MAX_CONV_STEPS

#define MAX31889_MAX_CONV_STEPS 10

◆ MAX31889_MEASUREMENT_TRIG_VALUE

#define MAX31889_MEASUREMENT_TRIG_VALUE 0xC1

◆ MAX31889_REG_ALARM_HIGH_LSB

#define MAX31889_REG_ALARM_HIGH_LSB 0x11

◆ MAX31889_REG_ALARM_HIGH_MSB

#define MAX31889_REG_ALARM_HIGH_MSB 0x10

◆ MAX31889_REG_ALARM_LOW_LSB

#define MAX31889_REG_ALARM_LOW_LSB 0x13

◆ MAX31889_REG_ALARM_LOW_MSB

#define MAX31889_REG_ALARM_LOW_MSB 0x12

◆ MAX31889_REG_DATA_CNT

#define MAX31889_REG_DATA_CNT 0x07

◆ MAX31889_REG_FIFO_CONFIG

#define MAX31889_REG_FIFO_CONFIG 0x09

◆ MAX31889_REG_FIFO_CONFIG2

#define MAX31889_REG_FIFO_CONFIG2 0x0A

◆ MAX31889_REG_FIFO_DATA

#define MAX31889_REG_FIFO_DATA 0x08

◆ MAX31889_REG_FIFO_READ_PTR

#define MAX31889_REG_FIFO_READ_PTR 0x05

◆ MAX31889_REG_FIFO_WRITE_PTR

#define MAX31889_REG_FIFO_WRITE_PTR 0x04

◆ MAX31889_REG_GPIO_CNTRL

#define MAX31889_REG_GPIO_CNTRL 0x21

◆ MAX31889_REG_GPIO_SETUP

#define MAX31889_REG_GPIO_SETUP 0x20

◆ MAX31889_REG_INT_ENABLE

#define MAX31889_REG_INT_ENABLE 0x01

◆ MAX31889_REG_OVERL_CNT

#define MAX31889_REG_OVERL_CNT 0x06

◆ MAX31889_REG_PART_ID

#define MAX31889_REG_PART_ID 0xFF

◆ MAX31889_REG_STATUS

#define MAX31889_REG_STATUS 0x00

◆ MAX31889_REG_SYS_CNTRL

#define MAX31889_REG_SYS_CNTRL 0x0C

◆ MAX31889_REG_TEMP_SETUP

#define MAX31889_REG_TEMP_SETUP 0x14

◆ TEMP_MEAS_WAIT_UNTIL_ERROR_MS

#define TEMP_MEAS_WAIT_UNTIL_ERROR_MS 1000

Function Documentation

◆ max31889_init()

int32_t max31889_init	(	struct max31889_desc **	desc,
		struct max31889_init_param *	param )

◆ max31889_read_reg()

int32_t max31889_read_reg	(	struct max31889_desc *	desc,
		uint8_t	reg_addr,
		uint8_t *	data,
		uint8_t	length )

Here is the caller graph for this function:

◆ max31889_remove()

int32_t max31889_remove ( struct max31889_desc * desc )

◆ max31889_trig_and_read_temp()

int32_t max31889_trig_and_read_temp	(	struct max31889_desc *	desc,
		double *	temperature )

◆ max31889_trig_conversion()

int32_t max31889_trig_conversion ( struct max31889_desc * desc )