Test Report (5.0.1)

Note

This test report applies to version 5.0.x. Any regressions specific to a .x release will be explicitly noted

Test Results

Testing Component

SC598-SOM-EZKIT

SC594-SOM-EZKIT

SC589-MINI

SC573-EZKIT

ADAU1962 Audio Out Driver

✅

✅

✅

✅

USB Gadget Audio

✅

✅

✅

✅

SHARC ALSA

✅

N/A

N/A

N/A

remoteproc

✅

✅

✅

✅

virtio rpmsg

✅

✅

✅

✅

Common Clock Framework

✅

✅

✅

✅

Crypto Framework

➖

➖

N/A

N/A

DMA Peripheral Implicitly tested as it’s used by SPI, OSPI, and UART drivers

✅

✅

✅

✅

MDMA Implicitly tested as it’s used only by remoteproc to load data to SHARC shared memory

✅

✅

✅

✅

EMAC0 (eth0)

✅

✅

✅

✅

EMAC11

➖

➖

➖

➖

GPTimers

✅

✅

✅

✅

I2C

✅

✅

✅

✅

SRAM/L2 alloc

✅

✅

✅

✅

SPI

✅

✅

✅

✅

QSPI Boot

✅

✅

✅

✅

eMMC dev/mmcblk0

➖

N/A

N/A

N/A

eMMC Boot2

➖

N/A

N/A

N/A

SD dev/mmcblk0

✅

N/A

✅

✅

SD Boot

✅

N/A

✅

✅

OSPI3

N/A

✅

N/A

N/A

uart0

✅

✅

✅

✅

USB: Host

✅

✅

✅

✅

USB: Device

✅

✅

✅

✅

Watchdog

✅

✅

✅

✅

Legend:

✅: PASS
❗: PASS with warning(s), see note
❌: FAIL, see note
N/A: Not Applicable
➖: Not Tested

1 Currently, the driver can enumerate the IP and identify what is present, but the PHY is not configured/reset yet and so ethernet communications do not work.

2 Currently, booting with the kernel and RFS on SD/eMMC is the only supported configuration, primarily due to hardware limitations on the SOM-CRR-EZKIT (so U-Boot must still be stored on the SPI flash)

3 OSPI is not currently working for MX66 chip under 5.x and 6.x kernel versions. OSPI (1S-8S-8S mode) does work for SC594 & IS25LX256