Test Report (5.1.0)

Note

This test report applies to version 5.1.x. Any regressions specific to a .x release will be explicitly noted

Test Results

Testing Component

SC598-SOM-EZKIT

SC594-SOM-EZKIT

SC589-MINI

SC573-EZLITE

ADAU1962 Audio Out Driver

✅

✅

✅

✅

USB Gadget Audio

✅

✅

✅

✅

SHARC ALSA

✅

N/A

N/A

N/A

remoteproc

✅

✅

✅

✅

virtio rpmsg

✅

✅

✅

✅

Common Clock Framework

✅

✅

✅

✅

Crypto Framework

➖

➖

N/A

N/A

DMA Peripheral Implicitly tested as it’s used by SPI, OSPI, and UART drivers

✅

✅

✅

✅

MDMA Implicitly tested as it’s used only by remoteproc to load data to SHARC shared memory

✅

✅

✅

✅

EMAC0 (eth0)

✅

✅

✅

✅

EMAC11

➖

➖

➖

➖

GPTimers

✅

✅

✅

✅

I2C

✅

✅

✅

✅

SRAM/L2 alloc

✅

✅

✅

✅

SPI

✅

✅

✅

✅

QSPI Boot

✅

✅

✅

✅

eMMC dev/mmcblk0

➖

N/A

N/A

N/A

eMMC Boot2

➖

N/A

N/A

N/A

SD dev/mmcblk0

✅

N/A

✅

✅

SD Boot

✅

N/A

✅

✅

OSPI3

N/A

✅

N/A

N/A

uart0

✅

✅

✅

✅

USB: Host

✅

✅

✅

✅

USB: Device

✅

✅

✅

✅

Watchdog

✅

✅

✅

✅

Legend:

✅: PASS
❗: PASS with warning(s), see note
❌: FAIL, see note
N/A: Not Applicable
➖: Not Tested

1 Currently, the driver can enumerate the IP and identify what is present, but the PHY is not configured/reset yet and so ethernet communications do not work.

2 Currently, booting with the kernel and RFS on SD/eMMC is the only supported configuration, primarily due to hardware limitations on the SOM-CRR-EZKIT (so U-Boot must still be stored on the SPI flash)

3 OSPI is not currently working for MX66 chip under 5.x and 6.x kernel versions. An update to the OSPI driver is currently under development in the ADI Linux repo. OSPI (1S-8S-8S mode) does work for SC594 & IS25LX256