Low Power (LP)

Modules
	PWRSEQ_Registers

Enumerations
enum	mxc_lp_ovr_t
enum	mxc_lp_cfg_ds_pd_t

Functions
void	MXC_LP_EnterSleepMode (void)
void	MXC_LP_EnterLowPowerMode (void)
void	MXC_LP_EnterMicroPowerMode (void)
void	MXC_LP_EnterStandbyMode (void)
void	MXC_LP_EnterBackupMode (void)
void	MXC_LP_EnterPowerDownMode (void)
void	MXC_LP_SetOVR (mxc_lp_ovr_t ovr)
void	MXC_LP_BandgapOn (void)
void	MXC_LP_BandgapOff (void)
int	MXC_LP_BandgapIsOn (void)
void	MXC_LP_ClearWakeStatus (void)
void	MXC_LP_EnableGPIOWakeup (mxc_gpio_cfg_t *wu_pins)
void	MXC_LP_DisableGPIOWakeup (mxc_gpio_cfg_t *wu_pins)
void	MXC_LP_EnableRTCAlarmWakeup (void)
void	MXC_LP_DisableRTCAlarmWakeup (void)
void	MXC_LP_EnableTimerWakeup (mxc_tmr_regs_t *tmr)
void	MXC_LP_DisableTimerWakeup (mxc_tmr_regs_t *tmr)
void	MXC_LP_EnableUSBWakeup (void)
void	MXC_LP_DisableUSBWakeup (void)
void	MXC_LP_EnableWUTAlarmWakeup (void)
void	MXC_LP_DisableWUTAlarmWakeup (void)
void	MXC_LP_EnableLPCMPWakeup (mxc_lpcmp_cmpsel_t cmp)
void	MXC_LP_DisableLPCMPWakeup (mxc_lpcmp_cmpsel_t cmp)
void	MXC_LP_EnableHA0Wakeup (void)
void	MXC_LP_DisableHA0Wakeup (void)
void	MXC_LP_EnableHA1Wakeup (void)
void	MXC_LP_DisableHA1Wakeup (void)
int	MXC_LP_ConfigDeepSleepClocks (uint32_t mask)
void	MXC_LP_NFCOscBypassEnable (void)
void	MXC_LP_NFCOscBypassDisable (void)
int	MXC_LP_NFCOscBypassIsEnabled (void)

Detailed Description

Function Documentation

MXC_LP_BandgapIsOn()

int MXC_LP_BandgapIsOn

(

void

)

Is the bandgap on or off.

Returns

1 = bandgap on , 0 = bandgap off

MXC_LP_ConfigDeepSleepClocks()

int MXC_LP_ConfigDeepSleepClocks

(

uint32_t

mask

)

Configure which clocks are powered down at deep sleep and which are not affected.

Note

Need to configure all clocks at once any clock not passed in the mask will be unaffected by Deepsleep. This will always overwrite the previous settings of ALL clocks.

Parameters

[in]

mask

The mask of the clocks to power down when part goes into deepsleep

Returns

E_NO_ERROR or error based on /ref MXC_Error_Codes

MXC_LP_DisableGPIOWakeup()

void MXC_LP_DisableGPIOWakeup

(

mxc_gpio_cfg_t *

wu_pins

)

Disables the selected GPIO port and its selected pins as a wake up source. Call this function multiple times to disable pins on multiple ports.

Parameters

wu_pins

The port and pins to disable as wakeup sources. Only the gpio and mask fields of the structure are used. The func and pad fields are ignored.

MXC_LP_DisableTimerWakeup()

void MXC_LP_DisableTimerWakeup

(

mxc_tmr_regs_t *

tmr

)

Disables Timer from waking up device.

Parameters

tmr	Pointer to timer module.

MXC_LP_EnableGPIOWakeup()

void MXC_LP_EnableGPIOWakeup

(

mxc_gpio_cfg_t *

wu_pins

)

Enables the selected GPIO port and its selected pins to wake up the device from any low power mode. Call this function multiple times to enable pins on multiple ports. This function does not configure the GPIO pins nor does it setup their interrupt functionality.

Parameters

wu_pins

The port and pins to configure as wakeup sources. Only the gpio and mask fields of the structure are used. The func and pad fields are ignored.

MXC_LP_EnableTimerWakeup()

void MXC_LP_EnableTimerWakeup

(

mxc_tmr_regs_t *

tmr

)

Enables Timer to wakeup from any low power mode.

Parameters

tmr	Pointer to timer module.

MXC_LP_NFCOscBypassIsEnabled()

int MXC_LP_NFCOscBypassIsEnabled

(

void

)

Is NFC Oscilator Bypass Enabled.

Returns

1 = enabled, 0 = disabled

MXC_LP_SetOVR()

void MXC_LP_SetOVR

(

mxc_lp_ovr_t

ovr

)

Set ovr bits to set the voltage the micro will run at.

Parameters

[in]

ovr

The ovr options are only 0.9V, 1.0V, and 1.1V use enum mxc_lp_ovr_t