ad9083.c File Reference

Implementation of ad9083 Driver. More...

#include <errno.h>
#include <stdlib.h>
#include "ad9083.h"
#include "adi_ad9083_hal.h"
#include "no_os_error.h"
#include <inttypes.h>
#include "no_os_delay.h"
#include "no_os_clk.h"
#include "uc_settings.h"
#include "no_os_util.h"
#include "no_os_alloc.h"
#include "no_os_print_log.h"

Include dependency graph for ad9083.c:

Macros
#define	CHIPID_AD9083   0x00EA
#define	CHIPID_MASK   0xFFFF
#define	SPI_IN_OUT_BUFF_SZ   0x3
#define	MAX_REG_ADDR   0x1000
#define	SPI_READ   0x80

Functions
int32_t	adi_ad9083_jtx_startup (adi_ad9083_device_t *device, adi_cms_jesd_param_t *jtx_param)
int32_t	adi_ad9083_jesd_tx_link_digital_reset (adi_ad9083_device_t *device, uint8_t reset)
int32_t	ad9083_reg_get (struct ad9083_phy *device, uint32_t reg, uint8_t *readval)
	Read register. More...
int32_t	ad9083_reg_set (struct ad9083_phy *device, uint32_t reg, uint8_t writeval)
	Write register. More...
int32_t	ad9083_log_write (void *user_data, int32_t log_type, const char *message, va_list argp)
int32_t	ad9083_reset_pin_ctrl (void *user_data, uint8_t enable)
int32_t	ad9083_init (struct ad9083_phy **device, struct ad9083_init_param *init_param)
int32_t	ad9083_remove (struct ad9083_phy *dev)
	Free the resources allocated by ad9083_init(). More...

Detailed Description

Implementation of ad9083 Driver.

Author

Cristian Pop (crist.nosp@m.ian..nosp@m.pop@a.nosp@m.nalo.nosp@m.g.com)

Copyright 2021(c) Analog Devices, Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

• Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
• Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
• Neither the name of Analog Devices, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
• The use of this software may or may not infringe the patent rights of one or more patent holders. This license does not release you from the requirement that you obtain separate licenses from these patent holders to use this software.
• Use of the software either in source or binary form, must be run on or directly connected to an Analog Devices Inc. component.

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Macro Definition Documentation

CHIPID_AD9083

#define CHIPID_AD9083   0x00EA

CHIPID_MASK

#define CHIPID_MASK   0xFFFF

MAX_REG_ADDR

#define MAX_REG_ADDR   0x1000

SPI_IN_OUT_BUFF_SZ

#define SPI_IN_OUT_BUFF_SZ   0x3

SPI_READ

#define SPI_READ   0x80

Function Documentation

ad9083_init()

int32_t ad9083_init	(	struct ad9083_phy **	device,
		struct ad9083_init_param *	init_param
	)

Initialize the device.

Parameters

device	- The device structure.
init_param	- The structure that contains the device initial parameters.

Returns

0 in case of success, negative error code otherwise.

ad9083_log_write()

int32_t ad9083_log_write	(	void *	user_data,
		int32_t	log_type,
		const char *	message,
		va_list	argp
	)

Log write

Parameters

user_data
log_type	- Log source type.
message	- Message.
argp	- Argp.

Returns

0 in case of success, -1 otherwise.

ad9083_reg_get()

int32_t ad9083_reg_get	(	struct ad9083_phy *	device,
		uint32_t	reg,
		uint8_t *	readval
	)

Read register.

Parameters

device	- ad9083 device.
reg	- Address of the register.
readval	- Value of the register.

Returns

0 in case of success, -1 otherwise.

Here is the caller graph for this function:

ad9083_reg_set()

int32_t ad9083_reg_set	(	struct ad9083_phy *	device,
		uint32_t	reg,
		uint8_t	writeval
	)

Write register.

Parameters

device	- ad9083 device.
reg	- Address of the register.
writeval	- Value of the register.

Returns

0 in case of success, -1 otherwise.

ad9083_remove()

int32_t ad9083_remove

(

struct ad9083_phy *

dev

)

Free the resources allocated by ad9083_init().

Parameters

dev	- Device descriptor.

Returns

0 in case of success, -1 otherwise.

ad9083_reset_pin_ctrl()

int32_t ad9083_reset_pin_ctrl	(	void *	user_data,
		uint8_t	enable
	)

Reset pin control

Parameters

user_data
enable	- State.

Returns

0 in case of success, -1 otherwise.

adi_ad9083_jesd_tx_link_digital_reset()

int32_t adi_ad9083_jesd_tx_link_digital_reset	(	adi_ad9083_device_t *	device,
		uint8_t	reset
	)

adi_ad9083_jtx_startup()

int32_t adi_ad9083_jtx_startup	(	adi_ad9083_device_t *	device,
		adi_cms_jesd_param_t *	jtx_param
	)