Implementation of ADE7880 Driver. More...

#include <stdlib.h>
#include <errno.h>
#include "ade7880.h"
#include "no_os_delay.h"
#include "no_os_units.h"
#include "no_os_alloc.h"

Include dependency graph for ade7880.c:

Functions
int	ade7880_read (struct ade7880_dev dev, uint16_t reg_addr, uint32_t reg_data)
	Read device register. More...

int	ade7880_write (struct ade7880_dev *dev, uint16_t reg_addr, uint32_t reg_data)
	Write device register. More...

int	ade7880_set_power_mode (struct ade7880_dev *dev)
	Set power mode. More...

int	ade7880_update_bits (struct ade7880_dev *dev, uint16_t reg_addr, uint32_t mask, uint32_t reg_data)
	Update specific register bits. More...

int	ade7880_get_int_status0 (struct ade7880_dev dev, uint32_t msk, uint8_t status)
	Get interrupt indicator from STATUS0 register. More...

int	ade7880_read_data_ph (struct ade7880_dev *dev, enum ade7880_phase phase)
	Read the power/energy for specific phase. More...

int	ade7880_init (struct ade7880_dev **device, struct ade7880_init_param init_param)
	Initialize the device. More...

int	ade7880_setup (struct ade7880_dev *dev)
	Setup the device. More...

int	ade7880_remove (struct ade7880_dev *dev)
	Remove the device and release resources. More...

Detailed Description

Implementation of ADE7880 Driver.

Author: REtz (radu..nosp@m.etz@.nosp@m.analo.nosp@m.g.co.nosp@m.m)

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of Analog Devices, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Function Documentation

◆ ade7880_get_int_status0()

int ade7880_get_int_status0	(	struct ade7880_dev *	dev,
		uint32_t	msk,
		uint8_t *	status
	)

Get interrupt indicator from STATUS0 register.

Parameters

dev	- The device structure.
msk	- Interrupt mask.
status	- Status indicator.

Returns: 0 in case of success, negative error code otherwise.

◆ ade7880_init()

int ade7880_init	(	struct ade7880_dev **	device,
		struct ade7880_init_param	init_param
	)

Initialize the device.

Parameters

device	- The device structure.
init_param	- The structure that contains the device initial parameters.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ade7880_read()

int ade7880_read	(	struct ade7880_dev *	dev,
		uint16_t	reg_addr,
		uint32_t *	reg_data
	)

Read device register.

Parameters

dev	- The device structure.
reg_addr	- The register address.
reg_data	- The data read from the register.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ade7880_read_data_ph()

int ade7880_read_data_ph	(	struct ade7880_dev *	dev,
		enum ade7880_phase	phase
	)

Read the power/energy for specific phase.

Parameters

dev	- The device structure.
phase	- ADE7880 Phase.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ade7880_remove()

int ade7880_remove ( struct ade7880_dev * dev )

Remove the device and release resources.

Parameters

dev	- The device structure.

Returns: 0 in case of success, negative error code otherwise.

◆ ade7880_set_power_mode()

int ade7880_set_power_mode ( struct ade7880_dev * dev )

Set power mode.

Parameters

dev	- The device structure.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ade7880_setup()

int ade7880_setup ( struct ade7880_dev * dev )

Setup the device.

Parameters

dev	- The device structure.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ade7880_update_bits()

int ade7880_update_bits	(	struct ade7880_dev *	dev,
		uint16_t	reg_addr,
		uint32_t	mask,
		uint32_t	reg_data
	)

Update specific register bits.

Parameters

dev	- The device structure.
reg_addr	- The register address.
mask	- Specific bits mask.
reg_data	- The data to be written.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

◆ ade7880_write()

int ade7880_write	(	struct ade7880_dev *	dev,
		uint16_t	reg_addr,
		uint32_t	reg_data
	)

Write device register.

Parameters

dev-	The device structure.
reg_addr	- The register address.
reg_data	- The data to be written.

Returns: 0 in case of success, negative error code otherwise.

Here is the caller graph for this function:

Functions

Detailed Description

Function Documentation

◆ ade7880_get_int_status0()

◆ ade7880_init()

◆ ade7880_read()

◆ ade7880_read_data_ph()

◆ ade7880_remove()

◆ ade7880_set_power_mode()

◆ ade7880_setup()

◆ ade7880_update_bits()

◆ ade7880_write()