mykonosArmGpioConfig_t Struct Reference

Data structure to hold ARM GPIO pin assignments for each ARM input/output pin. More...

#include <t_mykonos.h>

Public Attributes
uint8_t	useRx2EnablePin
uint8_t	useTx2EnablePin
uint8_t	txRxPinMode
uint8_t	orxPinMode
uint8_t	orxTriggerPin
uint8_t	orxMode2Pin
uint8_t	orxMode1Pin
uint8_t	orxMode0Pin
uint8_t	rx1EnableAck
uint8_t	rx2EnableAck
uint8_t	tx1EnableAck
uint8_t	tx2EnableAck
uint8_t	orx1EnableAck
uint8_t	orx2EnableAck
uint8_t	srxEnableAck
uint8_t	txObsSelect

Detailed Description

Data structure to hold ARM GPIO pin assignments for each ARM input/output pin.

Member Data Documentation

orx1EnableAck

uint8_t mykonosArmGpioConfig_t::orx1EnableAck

Select desired GPIO pin (0-15), [4] = Output Enable

orx2EnableAck

uint8_t mykonosArmGpioConfig_t::orx2EnableAck

Select desired GPIO pin (0-15), [4] = Output Enable

orxMode0Pin

uint8_t mykonosArmGpioConfig_t::orxMode0Pin

Select desired GPIO pin (valid 0-18)

orxMode1Pin

uint8_t mykonosArmGpioConfig_t::orxMode1Pin

Select desired GPIO pin (valid 0-18)

orxMode2Pin

uint8_t mykonosArmGpioConfig_t::orxMode2Pin

Select desired GPIO pin (valid 0-18)

orxPinMode

uint8_t mykonosArmGpioConfig_t::orxPinMode

0= ARM command mode, 1 = Pin mode to power up ObsRx receiver

orxTriggerPin

uint8_t mykonosArmGpioConfig_t::orxTriggerPin

Select desired GPIO pin (valid 4-15)

rx1EnableAck

uint8_t mykonosArmGpioConfig_t::rx1EnableAck

Select desired GPIO pin (0-15), [4] = Output Enable

rx2EnableAck

uint8_t mykonosArmGpioConfig_t::rx2EnableAck

Select desired GPIO pin (0-15), [4] = Output Enable

srxEnableAck

uint8_t mykonosArmGpioConfig_t::srxEnableAck

Select desired GPIO pin (0-15), [4] = Output Enable

tx1EnableAck

uint8_t mykonosArmGpioConfig_t::tx1EnableAck

Select desired GPIO pin (0-15), [4] = Output Enable

tx2EnableAck

uint8_t mykonosArmGpioConfig_t::tx2EnableAck

Select desired GPIO pin (0-15), [4] = Output Enable

txObsSelect

uint8_t mykonosArmGpioConfig_t::txObsSelect

Select desired GPIO pin (0-15), [4] = Output Enable

txRxPinMode

uint8_t mykonosArmGpioConfig_t::txRxPinMode

0= ARM command mode, 1 = Pin mode to power up Tx/Rx chains

useRx2EnablePin

uint8_t mykonosArmGpioConfig_t::useRx2EnablePin

0= RX1_ENABLE controls RX1 and RX2, 1 = separate RX1_ENABLE/RX2_ENABLE pins

useTx2EnablePin

uint8_t mykonosArmGpioConfig_t::useTx2EnablePin

0= TX1_ENABLE controls TX1 and TX2, 1 = separate TX1_ENABLE/TX2_ENABLE pins

---

The documentation for this struct was generated from the following file:

• projects/ad9371/src/devices/mykonos/t_mykonos.h