Bases: attribute, context_manager
ADF4382 Microwave Wideband Synthesizer with Integrated VCO
- parameters:
- uri: type=string
URI of IIO context with ADF4382
-
property altvolt0_en
Get/Set the enable/disable state of channel 0
-
property altvolt0_frequency
Get/Set the rfout frequency of channel 0
-
property altvolt0_output_power
Get/Set the output power of channel 0
-
property altvolt0_phase
Get/Set the phase adjustment of channel 0
-
property altvolt1_en
Get/Set the enable/disable state of channel 1
-
property altvolt1_frequency
Get/Set the rfout frequency of channel 1
-
property altvolt1_output_power
Get/Set the output power of channel 1
-
property altvolt1_phase
Get/Set the phase adjustment of channel 1
-
property bleed_current
Get/Set the bleed word value
-
property change_frequency
Get/Set the change frequency without starting calibration
-
property charge_pump_current
Get/Set the charge pump current in mA
-
property ezsync_setup
Get/Set the EZSync setup
-
property fastcal_en
Get/Set the enable state of fast calibration
-
property fastcal_lut_en
Get/Set the enable state of fast calibration Lookup Table usage
-
property reference_divider
Get/Set the reference divider
-
property reference_doubler_en
Get/Set the enable state of the reference doubler
-
property reference_frequency
Get/Set the reference frequency
-
reg_read(reg)
Direct Register Access via debugfs
-
reg_write(reg, value)
Direct Register Access via debugfs
-
property start_calibration
Get/Set the start calibration
-
property sw_sync_en
Get/Set the enable state of software synchronization
-
property timed_sync_setup
Get/Set the timed synchronization setup
