common_data.c File Reference

Defines the common data used in the examples eval-adf4377 project. More...

#include "common_data.h"
#include "parameters.h"

Include dependency graph for common_data.c:

Variables
struct no_os_spi_init_param	adf4377_spi_ip
struct no_os_gpio_init_param	gpio_ce_param
struct no_os_gpio_init_param	gpio_enclk1_param
struct no_os_gpio_init_param	gpio_enclk2_param
struct no_os_uart_init_param	adf4377_uart_ip
struct adf4377_init_param	adf4377_ip

Detailed Description

Defines the common data used in the examples eval-adf4377 project.

Author

Antoniu Miclaus (anton.nosp@m.iu.m.nosp@m.iclau.nosp@m.s@an.nosp@m.alog..nosp@m.com)

Jude Osemene (jude..nosp@m.osem.nosp@m.ene@a.nosp@m.nalo.nosp@m.g.com)

Copyright 2025(c) Analog Devices, Inc.

SPDX-License-Identifier: BSD-3-Clause

Variable Documentation

adf4377_ip

struct adf4377_init_param adf4377_ip

Initial value:

= {
    .dev_id = ADF4377,
    .spi_init = &adf4377_spi_ip,
    .spi4wire = true,
    .gpio_ce_param = &gpio_ce_param,
    .gpio_enclk1_param = &gpio_enclk1_param,
    .gpio_enclk2_param = &gpio_enclk2_param,
    .clkin_freq = 125000000,
    .ref_doubler_en = 1,
    .f_clk = 10000000000,
    .ref_div_factor = 1,
    .muxout_select = ADF4377_MUXOUT_HIGH_Z,
    .cp_i = ADF4377_CP_10MA1,
}

adf4377_spi_ip

struct no_os_spi_init_param adf4377_spi_ip

Initial value:

= {
    .device_id = SPI_DEVICE_ID,
    .max_speed_hz = 2000000,
    .chip_select = SPI_CS,
    .mode = NO_OS_SPI_MODE_0,
    .bit_order = NO_OS_SPI_BIT_ORDER_MSB_FIRST,
    .platform_ops = SPI_OPS,
    .extra = SPI_EXTRA
}

adf4377_uart_ip

struct no_os_uart_init_param adf4377_uart_ip

Initial value:

= {
    .device_id = UART_DEVICE_ID,
    .irq_id = UART_IRQ_ID,
    .asynchronous_rx = true,
    .baud_rate = UART_BAUDRATE,
    .size = NO_OS_UART_CS_8,
    .parity = NO_OS_UART_PAR_NO,
    .stop = NO_OS_UART_STOP_1_BIT,
    .extra = UART_EXTRA,
    .platform_ops = UART_OPS,
}

gpio_ce_param

struct no_os_gpio_init_param gpio_ce_param

Initial value:

= {
    .number = GPIO_CE,
    .port = GPIO_CE_PORT,
    .platform_ops = GPIO_OPS,
    .extra = GPIO_EXTRA
}

gpio_enclk1_param

struct no_os_gpio_init_param gpio_enclk1_param

Initial value:

= {
    .number = GPIO_ENCLK1,
    .port = GPIO_ENCLK1_PORT,
    .platform_ops = GPIO_OPS,
    .extra = GPIO_EXTRA
}

gpio_enclk2_param

struct no_os_gpio_init_param gpio_enclk2_param

Initial value:

= {
    .number = GPIO_ENCLK2,
    .port = GPIO_ENCLK2_PORT,
    .platform_ops = GPIO_OPS,
    .extra = GPIO_EXTRA
}