ad9434 Reference Design Integration

This page outlines the HDL reference design integration for the ad9434 reference design for the Analog Devices AD9434 component. The IP-Core Generation follow is available on the based on the following base HDL reference design for the following board and design variants:

  • Supported FPGA carriers:

    • ZC706

  • Supported design variants:

    • RX

Reference Design

HDL Reference Design with Custom IP from HDL-Coder. Click on sub-blocks for more documentation.

The IP-Core generation flow will integrate IP generated from Simulink subsystem into an ADI authored reference design. Depending on the FPGA carrier and FMC card or SoM, this will support different IP locations based on the diagram above.

HDL Workflow Advisor Port Mappings

When using the HDL Workflow Advisor, the following port mappings are used to connect the reference design to the HDL-Coder generated IP-Core:

Type

Target Platform Interface (MATLAB)

Reference Design Connection (Vivado)

Width

Reference Design Variant

VALID-IN

IP Valid Rx Data IN

axi_ad9434/adc_valid

1

RX

VALID-OUT

IP Data Valid OUT

axi_ad9434_dma/fifo_wr_en

1

RX

DATA-IN

AD9434 ADC Data 0 IN

xlslice_0/Dout

12

RX

DATA-IN

AD9434 ADC Data 1 IN

xlslice_1/Dout

12

RX

DATA-IN

AD9434 ADC Data 2 IN

xlslice_2/Dout

12

RX

DATA-IN

AD9434 ADC Data 3 IN

xlslice_3/Dout

12

RX

DATA-OUT

IP Data 0 OUT

xlconcat_0/In0

12

RX

DATA-OUT

IP Data 1 OUT

xlconcat_0/In1

12

RX

DATA-OUT

IP Data 2 OUT

xlconcat_0/In2

12

RX

DATA-OUT

IP Data 3 OUT

xlconcat_0/In3

12

RX