adi.QuadMxFE.Rx
The adi.QuadMxFE.Rx System object is a signal source that can receive complex data from the QuadMxFE.
rx = adi.QuadMxFE.Rx;
rx = adi.QuadMxFE.Rx('uri','ip:192.168.2.1');
Creation
The class can be instantiated in the following way with and without property name value pairs.
dev = adi.QuadMxFE.Rx
dev = adi.QuadMxFE.Rx(Name, Value)
Properties
Unless otherwise indicated, properties are non-tunable, which means you cannot change their values after calling the object. Objects lock when you call them, and the release function unlocks them.
If a property is tunable, you can change its value at any time.
For more information on changing property values, see System Design in MATLAB Using System Objects.
Frequency of NCO in fine decimators in receive path. Property must be a [1,N] vector where each value is the frequency of an NCO in hertz, and N is the number of channels available.
Frequency of NCO in fine decimators in receive path. Property must be a [1,N] vector where each value is the frequency of an NCO in hertz, and N is the number of channels available.
Frequency of NCO in fine decimators in receive path. Property must be a [1,N] vector where each value is the frequency of an NCO in hertz, and N is the number of channels available.
Frequency of NCO in fine decimators in receive path. Property must be a [1,N] vector where each value is the frequency of an NCO in hertz, and N is the number of channels available.
Frequency of NCO in fine decimators in receive path. Property must be a [1,N] vector where each value is the frequency of an NCO in hertz, and N is the number of channels available.
Frequency of NCO in fine decimators in receive path. Property must be a [1,N] vector where each value is the frequency of an NCO in hertz, and N is the number of channels available.
Frequency of NCO in fine decimators in receive path. Property must be a [1,N] vector where each value is the frequency of an NCO in hertz, and N is the number of channels available.
Frequency of NCO in fine decimators in receive path. Property must be a [1,N] vector where each value is the frequency of an NCO in hertz, and N is the number of channels available.
Frequency of NCO in fine decimators in receive path. Property must be a [1,N] vector where each value is the frequency of an NCO in hertz, and N is the number of channels available.
Frequency of NCO in fine decimators in receive path. Property must be a [1,N] vector where each value is the frequency of an NCO in hertz, and N is the number of channels available.
Frequency of NCO in fine decimators in receive path. Property must be a [1,N] vector where each value is the frequency of an NCO in hertz, and N is the number of channels available.
Frequency of NCO in fine decimators in receive path. Property must be a [1,N] vector where each value is the frequency of an NCO in hertz, and N is the number of channels available.
Frequency of NCO in fine decimators in receive path. Property must be a [1,N] vector where each value is the frequency of an NCO in hertz, and N is the number of channels available.
Frequency of NCO in fine decimators in receive path. Property must be a [1,N] vector where each value is the frequency of an NCO in hertz, and N is the number of channels available.
Frequency of NCO in fine decimators in receive path. Property must be a [1,N] vector where each value is the frequency of an NCO in hertz, and N is the number of channels available.
Frequency of NCO in fine decimators in receive path. Property must be a [1,N] vector where each value is the frequency of an NCO in hertz, and N is the number of channels available.
Test mode of receive path. Options are: ‘off’ ‘midscale_short’ ‘pos_fullscale’ ‘neg_fullscale’ ‘checkerboard’ ‘pn9’ ‘pn32’ ‘one_zero_toggle’ ‘user’ ‘pn7’ ‘pn15’ ‘pn31’ ‘ramp’
Test mode of receive path. Options are: ‘off’ ‘midscale_short’ ‘pos_fullscale’ ‘neg_fullscale’ ‘checkerboard’ ‘pn9’ ‘pn32’ ‘one_zero_toggle’ ‘user’ ‘pn7’ ‘pn15’ ‘pn31’ ‘ramp’
Test mode of receive path. Options are: ‘off’ ‘midscale_short’ ‘pos_fullscale’ ‘neg_fullscale’ ‘checkerboard’ ‘pn9’ ‘pn32’ ‘one_zero_toggle’ ‘user’ ‘pn7’ ‘pn15’ ‘pn31’ ‘ramp’
Test mode of receive path. Options are: ‘off’ ‘midscale_short’ ‘pos_fullscale’ ‘neg_fullscale’ ‘checkerboard’ ‘pn9’ ‘pn32’ ‘one_zero_toggle’ ‘user’ ‘pn7’ ‘pn15’ ‘pn31’ ‘ramp’
Enable use of PFIR/PFILT filters for Chip A
Enable use of PFIR/PFILT filters for Chip B
Enable use of PFIR/PFILT filters for Chip C
Enable use of PFIR/PFILT filters for Chip D
Path(s) to FPIR/PFILT filter file(s). Input can be a string or cell array of strings. Files are loading in order for Chip A
Path(s) to FPIR/PFILT filter file(s). Input can be a string or cell array of strings. Files are loading in order for Chip B
Path(s) to FPIR/PFILT filter file(s). Input can be a string or cell array of strings. Files are loading in order for Chip C
Path(s) to FPIR/PFILT filter file(s). Input can be a string or cell array of strings. Files are loading in order for Chip D
Attenuation value of external HMC425a
Number of samples per frame, specified as an even positive integer from 2 to 16,777,216. Using values less than 3660 can yield poor performance.
Enable interpolation (TX) or decimation (RX) by 2 when enabled to correct interface rate to 125 MS/s. This will scale the input and output data length by either 1/2 (RX) or 2 (TX).
adi.QuadMxFE.Rx/CalibrationBoardAttached is a property.
Indexs of channels to be enabled. Input should be a [1xN] vector with the indexes of channels to be enabled. Order is irrelevant
Hostname or IP address of remote libIIO deviceHelp for adi.QuadMxFE.Rx/uri is inherited from superclass matlabshared.libiio.base
Example Usage
%% Rx set up
rx = adi.QuadMxFE.Rx('uri','ip:analog.local');
rx.SamplesPerFrame = 2^14;
rx.EnabledChannels = 1;
%% Run
for k=1:10
valid = false;
while ~valid
[out, valid] = rx();
end
end
%% Cleanup
release(rx)