Linux for ADSP-SC5xx Processors 5.0.0

Welcome to version 5.0.0 of Linux for ADSP-SC5xx. This collection of pages contains all you need to know in order to download, build, develop and install Linux, running on the ARM core of the ADSP-SC5xx family of processors.

Release Status

The following boards are supported on this release.

Development Board	Board Revision	Getting Started Guide
ADSP-SC598 SOM and EV-SOMCRR-EZKIT carrier board	Rev A/B/C/D/E (DSP-SC598 SOM), Rev A/D (REV-SOMCRR-EZKIT)	Getting Started with ADSP-SC598
ADSP-SC594 SOM and EV-SOMCRR-EZKIT carrier board	1.0 Rev B or later	Getting Started with ADSP-SC594
ADSP-SC589-MINI	1.5 or later	Getting Started with ADSP-SC589 MINI
ADSP-SC573 EZ-KIT	1.5 or later	Getting Started with ADSP-SC573 EZ-KIT

If you do not have an ICE-1/2000 debugger, you can use these steps with the quickstart guide for boards with a usb debug agent (USB DA) port.

Building of the Linux software requires a host PC running a recent flavour Linux. Analog Devices uses 64-bit Ubuntu 22.04 LTS for its building and testing of Linux for ADSP-SC5xx. If you are new to Linux development we strongly recommend using a host PC with this installation of Linux. If you are confident in resolving variant specific problems feel free to use your favourite distro.

Release Notes

Release Notes for the 5.0.0 release can be found here. The test report for this page can be found here.