Defines common data to be used by ADE9078 example project. More...

#include "ade9078.h"
#include "no_os_uart.h"
#include "no_os_pwm.h"
#include "no_os_delay.h"
#include "no_os_gpio.h"
#include "no_os_spi.h"
#include "no_os_print_log.h"
#include "no_os_units.h"
#include "no_os_util.h"
#include "no_os_error.h"
#include "maxim_uart.h"
#include "maxim_gpio.h"
#include "maxim_uart_stdio.h"
#include "maxim_pwm.h"
#include "maxim_spi.h"
#include "maxim_irq.h"

Include dependency graph for platform.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros
#define	GPIO_LED_PORT 2

#define	GPIO_LED_PIN 1

#define	GPIO_PSM0_PORT 2

#define	GPIO_PSM0_PIN 7

#define	GPIO_PSM1_PORT 2

#define	GPIO_PSM1_PIN 8

#define	GPIO_RESET_PORT 2

#define	GPIO_RESET_PIN 9

#define	GPIO_OPS &max_gpio_ops

#define	GPIO_EXTRA &ade9078_gpio_extra_ip

#define	SPI_DEVICE_ID 1

#define	SPI_BAUDRATE 1000000

#define	SPI_CS 0

#define	SPI_SLAVE_NUM 1

#define	UART_DEV_ID 0

#define	UART_BAUD 115200

#define	RESET_TIME 500

#define	READ_INTERVAL 3000

Variables
struct no_os_uart_init_param	uart_ip

struct no_os_gpio_init_param	gpio_led1_ip

struct no_os_gpio_init_param	gpio_psm0_ip

struct no_os_gpio_init_param	gpio_psm1_ip

struct no_os_gpio_init_param	gpio_reset_ip

struct no_os_spi_init_param	ade9078_spi_ip

Detailed Description

Defines common data to be used by ADE9078 example project.

Author: REtz (radu..nosp@m.etz@.nosp@m.analo.nosp@m.g.co.nosp@m.m)

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of Analog Devices, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Macro Definition Documentation

◆ GPIO_EXTRA

#define GPIO_EXTRA &ade9078_gpio_extra_ip

◆ GPIO_LED_PIN

#define GPIO_LED_PIN 1

◆ GPIO_LED_PORT

#define GPIO_LED_PORT 2

◆ GPIO_OPS

#define GPIO_OPS &max_gpio_ops

◆ GPIO_PSM0_PIN

#define GPIO_PSM0_PIN 7

◆ GPIO_PSM0_PORT

#define GPIO_PSM0_PORT 2

◆ GPIO_PSM1_PIN

#define GPIO_PSM1_PIN 8

◆ GPIO_PSM1_PORT

#define GPIO_PSM1_PORT 2

◆ GPIO_RESET_PIN

#define GPIO_RESET_PIN 9

◆ GPIO_RESET_PORT

#define GPIO_RESET_PORT 2

◆ READ_INTERVAL

#define READ_INTERVAL 3000

◆ RESET_TIME

#define RESET_TIME 500

◆ SPI_BAUDRATE

#define SPI_BAUDRATE 1000000

◆ SPI_CS

#define SPI_CS 0

◆ SPI_DEVICE_ID

#define SPI_DEVICE_ID 1

◆ SPI_SLAVE_NUM

#define SPI_SLAVE_NUM 1

◆ UART_BAUD

#define UART_BAUD 115200

◆ UART_DEV_ID

#define UART_DEV_ID 0

Variable Documentation

◆ ade9078_spi_ip

struct no_os_spi_init_param ade9078_spi_ip

◆ gpio_led1_ip

struct no_os_gpio_init_param gpio_led1_ip

◆ gpio_psm0_ip

struct no_os_gpio_init_param gpio_psm0_ip

◆ gpio_psm1_ip

struct no_os_gpio_init_param gpio_psm1_ip

◆ gpio_reset_ip

struct no_os_gpio_init_param gpio_reset_ip

◆ uart_ip

struct no_os_uart_init_param uart_ip

Macros

Variables