precision-converters-firmware
Macros | Functions | Variables
app_config.h File Reference

Configuration file for AD738x device application. More...

#include <stdint.h>
#include "app_config_mbed.h"
Include dependency graph for app_config.h:
This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros

#define MBED_PLATFORM   1
 
#define BURST_DATA_CAPTURE   0
 
#define CONTINUOUS_DATA_CAPTURE   1
 
#define XSTR(s)   #s
 
#define STR(s)   XSTR(s)
 
#define ACTIVE_DEVICE_NAME   "ad7380-2"
 
#define ACTIVE_PLATFORM   MBED_PLATFORM
 
#define DATA_CAPTURE_MODE   CONTINUOUS_DATA_CAPTURE
 
#define USE_VIRTUAL_COM_PORT
 
#define HW_CARRIER_NAME   TARGET_NAME
 
#define pwm_extra_init_params   mbed_pwm_extra_init_params
 
#define uart_extra_init_params   mbed_uart_extra_init_params
 
#define vcom_extra_init_params   mbed_vcom_extra_init_params
 
#define spi_extra_init_params   mbed_spi_extra_init_params
 
#define i2c_extra_init_params   mbed_i2c_extra_init_params
 
#define trigger_gpio_extra_init_params   mbed_trigger_gpio_extra_init_params
 
#define trigger_gpio_irq_extra_params   mbed_trigger_gpio_irq_init_params
 
#define trigger_gpio_ops   mbed_gpio_ops
 
#define spi_ops   mbed_spi_ops
 
#define i2c_ops   mbed_i2c_ops
 
#define uart_ops   mbed_uart_ops
 
#define vcom_ops   mbed_virtual_com_ops
 
#define trigger_gpio_irq_ops   mbed_gpio_irq_ops
 
#define trigger_gpio_handle   0
 
#define UART_MODULE   0
 
#define SPI_MODULE   0
 
#define TRIGGER_GPIO_PORT   0
 
#define TRIGGER_GPIO_PIN   PWM_TRIGGER
 
#define TRIGGER_INT_ID   GPIO_IRQ_ID1
 
#define ADC_RESOLUTION   16
 
#define ADC_CHANNELS   2
 
#define ADC_REF_VOLTAGE   3.3
 
#define ADC_MAX_COUNT_UNIPOLAR   (uint32_t)((1 << ADC_RESOLUTION) - 1)
 
#define ADC_MAX_COUNT_BIPOLAR   (uint32_t)(1 << (ADC_RESOLUTION-1))
 
#define IIO_UART_BAUD_RATE   (230400)
 
#define DEVICE_NAME   "DEV_AD7380_2"
 
#define FIRMWARE_NAME   "ad738x_iio"
 
#define PLATFORM_NAME   HW_CARRIER_NAME
 
#define VIRTUAL_COM_PORT_VID   0x0456
 
#define VIRTUAL_COM_PORT_PID   0xb66c
 
#define VIRTUAL_COM_SERIAL_NUM   (FIRMWARE_NAME "_" DEVICE_NAME "_" STR(PLATFORM_NAME))
 
#define CONSOLE_STDIO_PORT_AVAILABLE
 

Functions

int32_t init_system (void)
 Initialize the system peripherals. More...
 
int32_t init_pwm_trigger (void)
 Initialize the PWM trigger contoller. More...
 

Variables

struct no_os_uart_desc * uart_iio_com_desc
 
struct no_os_uart_desc * uart_console_stdio_desc
 
struct no_os_irq_ctrl_desc * trigger_irq_desc
 
struct no_os_spi_init_param spi_init_params
 

Detailed Description

Configuration file for AD738x device application.

Copyright (c) 2022-23 Analog Devices, Inc. All rights reserved.

This software is proprietary to Analog Devices, Inc. and its licensors. By using this software you agree to the terms of the associated Analog Devices Software License Agreement.

Macro Definition Documentation

◆ ACTIVE_DEVICE_NAME

#define ACTIVE_DEVICE_NAME   "ad7380-2"

◆ ACTIVE_PLATFORM

#define ACTIVE_PLATFORM   MBED_PLATFORM

◆ ADC_CHANNELS

#define ADC_CHANNELS   2

◆ ADC_MAX_COUNT_BIPOLAR

#define ADC_MAX_COUNT_BIPOLAR   (uint32_t)(1 << (ADC_RESOLUTION-1))

◆ ADC_MAX_COUNT_UNIPOLAR

#define ADC_MAX_COUNT_UNIPOLAR   (uint32_t)((1 << ADC_RESOLUTION) - 1)

◆ ADC_REF_VOLTAGE

#define ADC_REF_VOLTAGE   3.3

◆ ADC_RESOLUTION

#define ADC_RESOLUTION   16

◆ BURST_DATA_CAPTURE

#define BURST_DATA_CAPTURE   0

◆ CONSOLE_STDIO_PORT_AVAILABLE

#define CONSOLE_STDIO_PORT_AVAILABLE

◆ CONTINUOUS_DATA_CAPTURE

#define CONTINUOUS_DATA_CAPTURE   1

◆ DATA_CAPTURE_MODE

#define DATA_CAPTURE_MODE   CONTINUOUS_DATA_CAPTURE

◆ DEVICE_NAME

#define DEVICE_NAME   "DEV_AD7380_2"

◆ FIRMWARE_NAME

#define FIRMWARE_NAME   "ad738x_iio"

◆ HW_CARRIER_NAME

#define HW_CARRIER_NAME   TARGET_NAME

◆ i2c_extra_init_params

#define i2c_extra_init_params   mbed_i2c_extra_init_params

◆ i2c_ops

#define i2c_ops   mbed_i2c_ops

◆ IIO_UART_BAUD_RATE

#define IIO_UART_BAUD_RATE   (230400)

◆ MBED_PLATFORM

#define MBED_PLATFORM   1

◆ PLATFORM_NAME

#define PLATFORM_NAME   HW_CARRIER_NAME

◆ pwm_extra_init_params

#define pwm_extra_init_params   mbed_pwm_extra_init_params

◆ spi_extra_init_params

#define spi_extra_init_params   mbed_spi_extra_init_params

◆ SPI_MODULE

#define SPI_MODULE   0

◆ spi_ops

#define spi_ops   mbed_spi_ops

◆ STR

#define STR (   s)    XSTR(s)

◆ trigger_gpio_extra_init_params

#define trigger_gpio_extra_init_params   mbed_trigger_gpio_extra_init_params

◆ trigger_gpio_handle

#define trigger_gpio_handle   0

◆ trigger_gpio_irq_extra_params

#define trigger_gpio_irq_extra_params   mbed_trigger_gpio_irq_init_params

◆ trigger_gpio_irq_ops

#define trigger_gpio_irq_ops   mbed_gpio_irq_ops

◆ trigger_gpio_ops

#define trigger_gpio_ops   mbed_gpio_ops

◆ TRIGGER_GPIO_PIN

#define TRIGGER_GPIO_PIN   PWM_TRIGGER

◆ TRIGGER_GPIO_PORT

#define TRIGGER_GPIO_PORT   0

◆ TRIGGER_INT_ID

#define TRIGGER_INT_ID   GPIO_IRQ_ID1

◆ uart_extra_init_params

#define uart_extra_init_params   mbed_uart_extra_init_params

◆ UART_MODULE

#define UART_MODULE   0

◆ uart_ops

#define uart_ops   mbed_uart_ops

◆ USE_VIRTUAL_COM_PORT

#define USE_VIRTUAL_COM_PORT

◆ vcom_extra_init_params

#define vcom_extra_init_params   mbed_vcom_extra_init_params

◆ vcom_ops

#define vcom_ops   mbed_virtual_com_ops

◆ VIRTUAL_COM_PORT_PID

#define VIRTUAL_COM_PORT_PID   0xb66c

◆ VIRTUAL_COM_PORT_VID

#define VIRTUAL_COM_PORT_VID   0x0456

◆ VIRTUAL_COM_SERIAL_NUM

#define VIRTUAL_COM_SERIAL_NUM   (FIRMWARE_NAME "_" DEVICE_NAME "_" STR(PLATFORM_NAME))

◆ XSTR

#define XSTR (   s)    #s

Function Documentation

◆ init_pwm_trigger()

int32_t init_pwm_trigger ( void  )

Initialize the PWM trigger contoller.

Returns
0 in case of success, negative error code otherwise

Initialize the PWM trigger contoller.

Returns
0 in case of success, negative error code otherwise.

◆ init_system()

int32_t init_system ( void  )

Initialize the system peripherals.

Returns
0 in case of success, negative error code otherwise

Initialize the system peripherals.

Returns
0 in case of success, negative error code otherwise.

This function initializes system peripherals for the application

Returns
- 0 in case of success, negative error code otherwise

Variable Documentation

◆ spi_init_params

struct no_os_spi_init_param spi_init_params
extern

◆ trigger_irq_desc

struct no_os_irq_ctrl_desc* trigger_irq_desc
extern

◆ uart_console_stdio_desc

struct no_os_uart_desc* uart_console_stdio_desc
extern

◆ uart_iio_com_desc

struct no_os_uart_desc* uart_iio_com_desc
extern
Generated by doxygen 1.9.1