Definitions specific to xilinx platform used by ad463x_fmcz project. More...

#include <stdio.h>
#include <xparameters.h>
#include <xil_cache.h>
#include <xilinx_uart.h>
#include "xilinx_gpio.h"
#include "axi_pwm_extra.h"
#include "spi_engine.h"

Include dependency graph for parameters.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Macros
#define	UART_DEVICE_ID XPAR_AXI_UART_DEVICE_ID

#define	INTC_DEVICE_ID XPAR_INTC_SINGLE_DEVICE_ID

#define	UART_IRQ_ID XPAR_AXI_INTC_AXI_UART_INTERRUPT_INTR

#define	UART_BAUDRATE 115200

#define	UART_EXTRA &uart_extra_ip

#define	DMA_BASEADDR XPAR_AXI_AD738X_DMA_BASEADDR

#define	SPI_ENGINE_BASEADDR XPAR_SPI_AD738X_ADC_SPI_AD738X_ADC_AXI_REGMAP_BASEADDR

#define	RX_CLKGEN_BASEADDR XPAR_SPI_CLKGEN_BASEADDR

#define	AXI_PWMGEN_BASEADDR XPAR_SPI_TRIGGER_GEN_BASEADDR

#define	SPI_DEVICE_ID 0

#define	SPI_CS 0

#define	SPI_BAUDRATE 80000000

#define	SPI_EXTRA &spi_eng_init_param

#define	TRIGGER_PWM_ID 0

#define	TRIGGER_PERIOD_NS 250

#define	TRIGGER_DUTY_NS 10

#define	TRIGGER_PWM_EXTRA &axi_pwm_init_param

#define	SAMPLES_PER_CHANNEL 1000

#define	BYTES_PER_SAMPLE 2

#define	MAX_SIZE_BASE_ADDR (SAMPLES_PER_CHANNEL * 2 * BYTES_PER_SAMPLE)

#define	DCACHE_INVALIDATE Xil_DCacheInvalidateRange

#define	SPI_OPS &spi_eng_platform_ops

#define	PWM_OPS &axi_pwm_ops

#define	UART_OPS &xil_uart_ops

#define	CLKGEN_INIT &clkgen_init

#define	OFFLOAD_INIT &spi_engine_offload_init_param

Variables
struct xil_uart_init_param	uart_extra_ip

struct axi_clkgen_init	clkgen_init

struct spi_engine_offload_init_param	spi_engine_offload_init_param

struct spi_engine_init_param	spi_eng_init_param

struct axi_pwm_init_param	axi_pwm_init_param

Detailed Description

Definitions specific to xilinx platform used by ad463x_fmcz project.

Author: Antoniu Miclaus (anton.nosp@m.iu.m.nosp@m.iclau.nosp@m.s@an.nosp@m.alog..nosp@m.com); Axel Haslam (ahasl.nosp@m.am@b.nosp@m.aylib.nosp@m.re.c.nosp@m.om)

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Neither the name of Analog Devices, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES, INC. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Macro Definition Documentation

◆ AXI_PWMGEN_BASEADDR

#define AXI_PWMGEN_BASEADDR XPAR_SPI_TRIGGER_GEN_BASEADDR

◆ BYTES_PER_SAMPLE

#define BYTES_PER_SAMPLE 2

◆ CLKGEN_INIT

#define CLKGEN_INIT &clkgen_init

◆ DCACHE_INVALIDATE

#define DCACHE_INVALIDATE Xil_DCacheInvalidateRange

◆ DMA_BASEADDR

#define DMA_BASEADDR XPAR_AXI_AD738X_DMA_BASEADDR

◆ INTC_DEVICE_ID

#define INTC_DEVICE_ID XPAR_INTC_SINGLE_DEVICE_ID

◆ MAX_SIZE_BASE_ADDR

#define MAX_SIZE_BASE_ADDR (SAMPLES_PER_CHANNEL * 2 * BYTES_PER_SAMPLE)

◆ OFFLOAD_INIT

#define OFFLOAD_INIT &spi_engine_offload_init_param

◆ PWM_OPS

#define PWM_OPS &axi_pwm_ops

◆ RX_CLKGEN_BASEADDR

#define RX_CLKGEN_BASEADDR XPAR_SPI_CLKGEN_BASEADDR

◆ SAMPLES_PER_CHANNEL

#define SAMPLES_PER_CHANNEL 1000

◆ SPI_BAUDRATE

#define SPI_BAUDRATE 80000000

◆ SPI_CS

#define SPI_CS 0

◆ SPI_DEVICE_ID

#define SPI_DEVICE_ID 0

◆ SPI_ENGINE_BASEADDR

#define SPI_ENGINE_BASEADDR XPAR_SPI_AD738X_ADC_SPI_AD738X_ADC_AXI_REGMAP_BASEADDR

◆ SPI_EXTRA

#define SPI_EXTRA &spi_eng_init_param

◆ SPI_OPS

#define SPI_OPS &spi_eng_platform_ops

◆ TRIGGER_DUTY_NS

#define TRIGGER_DUTY_NS 10

◆ TRIGGER_PERIOD_NS

#define TRIGGER_PERIOD_NS 250

◆ TRIGGER_PWM_EXTRA

#define TRIGGER_PWM_EXTRA &axi_pwm_init_param

◆ TRIGGER_PWM_ID

#define TRIGGER_PWM_ID 0

◆ UART_BAUDRATE

#define UART_BAUDRATE 115200

◆ UART_DEVICE_ID

#define UART_DEVICE_ID XPAR_AXI_UART_DEVICE_ID

◆ UART_EXTRA

#define UART_EXTRA &uart_extra_ip

◆ UART_IRQ_ID

#define UART_IRQ_ID XPAR_AXI_INTC_AXI_UART_INTERRUPT_INTR

◆ UART_OPS

#define UART_OPS &xil_uart_ops

Variable Documentation

◆ axi_pwm_init_param

struct axi_pwm_init_param axi_pwm_init_param

◆ clkgen_init

struct axi_clkgen_init clkgen_init

◆ spi_eng_init_param

struct spi_engine_init_param spi_eng_init_param

◆ spi_engine_offload_init_param

struct spi_engine_offload_init_param spi_engine_offload_init_param

◆ uart_extra_ip

struct xil_uart_init_param uart_extra_ip

Macros

Variables