Header file of AD9361 API Driver. More...

#include "ad9361_util.h"
#include "no_os_gpio.h"
#include "no_os_spi.h"

Include dependency graph for ad9361_api.h:

Classes
struct	AD9361_InitParam

struct	AD9361_RXFIRConfig

struct	AD9361_TXFIRConfig

Macros
#define	ENABLE 1

#define	DISABLE 0

#define	RX1 0

#define	RX2 1

#define	TX1 0

#define	TX2 1

#define	A_BALANCED 0

#define	B_BALANCED 1

#define	C_BALANCED 2

#define	A_N 3

#define	A_P 4

#define	B_N 5

#define	B_P 6

#define	C_N 7

#define	C_P 8

#define	TX_MON1 9

#define	TX_MON2 10

#define	TX_MON1_2 11

#define	TXA 0

#define	TXB 1

#define	MODE_1x1 1

#define	MODE_2x2 2

#define	HIGHEST_OSR 0

#define	NOMINAL_OSR 1

#define	INT_LO 0

#define	EXT_LO 1

#define	ON 0

#define	OFF 1

Enumerations
enum	ad9361_ensm_mode { ENSM_MODE_TX , ENSM_MODE_RX , ENSM_MODE_ALERT , ENSM_MODE_FDD , ENSM_MODE_WAIT , ENSM_MODE_SLEEP , ENSM_MODE_PINCTRL , ENSM_MODE_PINCTRL_FDD_INDEP }

Functions
int32_t	ad9361_init (struct ad9361_rf_phy *ad9361_phy, AD9361_InitParam init_param)

int32_t	ad9361_remove (struct ad9361_rf_phy *phy)

int32_t	ad9361_set_en_state_machine_mode (struct ad9361_rf_phy *phy, uint32_t mode)

int32_t	ad9361_get_en_state_machine_mode (struct ad9361_rf_phy phy, uint32_t mode)

int32_t	ad9361_set_rx_rf_gain (struct ad9361_rf_phy *phy, uint8_t ch, int32_t gain_db)

int32_t	ad9361_get_rx_rf_gain (struct ad9361_rf_phy phy, uint8_t ch, int32_t gain_db)

int32_t	ad9361_set_rx_rf_bandwidth (struct ad9361_rf_phy *phy, uint32_t bandwidth_hz)

int32_t	ad9361_get_rx_rf_bandwidth (struct ad9361_rf_phy phy, uint32_t bandwidth_hz)

int32_t	ad9361_set_rx_sampling_freq (struct ad9361_rf_phy *phy, uint32_t sampling_freq_hz)

int32_t	ad9361_get_rx_sampling_freq (struct ad9361_rf_phy phy, uint32_t sampling_freq_hz)

int32_t	ad9361_set_rx_lo_freq (struct ad9361_rf_phy *phy, uint64_t lo_freq_hz)

int32_t	ad9361_get_rx_lo_freq (struct ad9361_rf_phy phy, uint64_t lo_freq_hz)

int32_t	ad9361_set_rx_lo_int_ext (struct ad9361_rf_phy *phy, uint8_t int_ext)

int32_t	ad9361_get_rx_rssi (struct ad9361_rf_phy phy, uint8_t ch, struct rf_rssi rssi)

int32_t	ad9361_set_rx_gain_control_mode (struct ad9361_rf_phy *phy, uint8_t ch, uint8_t gc_mode)

int32_t	ad9361_get_rx_gain_control_mode (struct ad9361_rf_phy phy, uint8_t ch, uint8_t gc_mode)

int32_t	ad9361_set_rx_fir_config (struct ad9361_rf_phy *phy, AD9361_RXFIRConfig fir_cfg)

int32_t	ad9361_get_rx_fir_config (struct ad9361_rf_phy phy, uint8_t rx_ch, AD9361_RXFIRConfig fir_cfg)

int32_t	ad9361_set_rx_fir_en_dis (struct ad9361_rf_phy *phy, uint8_t en_dis)

int32_t	ad9361_get_rx_fir_en_dis (struct ad9361_rf_phy phy, uint8_t en_dis)

int32_t	ad9361_set_rx_rfdc_track_en_dis (struct ad9361_rf_phy *phy, uint8_t en_dis)

int32_t	ad9361_get_rx_rfdc_track_en_dis (struct ad9361_rf_phy phy, uint8_t en_dis)

int32_t	ad9361_set_rx_bbdc_track_en_dis (struct ad9361_rf_phy *phy, uint8_t en_dis)

int32_t	ad9361_get_rx_bbdc_track_en_dis (struct ad9361_rf_phy phy, uint8_t en_dis)

int32_t	ad9361_set_rx_quad_track_en_dis (struct ad9361_rf_phy *phy, uint8_t en_dis)

int32_t	ad9361_get_rx_quad_track_en_dis (struct ad9361_rf_phy phy, uint8_t en_dis)

int32_t	ad9361_set_rx_rf_port_input (struct ad9361_rf_phy *phy, uint32_t mode)

int32_t	ad9361_get_rx_rf_port_input (struct ad9361_rf_phy phy, uint32_t mode)

int32_t	ad9361_rx_fastlock_store (struct ad9361_rf_phy *phy, uint32_t profile)

int32_t	ad9361_rx_fastlock_recall (struct ad9361_rf_phy *phy, uint32_t profile)

int32_t	ad9361_rx_fastlock_load (struct ad9361_rf_phy phy, uint32_t profile, uint8_t values)

int32_t	ad9361_rx_fastlock_save (struct ad9361_rf_phy phy, uint32_t profile, uint8_t values)

int32_t	ad9361_rx_lo_powerdown (struct ad9361_rf_phy *phy, uint8_t option)

int32_t	ad9361_get_rx_lo_power (struct ad9361_rf_phy phy, uint8_t option)

int32_t	ad9361_set_tx_attenuation (struct ad9361_rf_phy *phy, uint8_t ch, uint32_t attenuation_mdb)

int32_t	ad9361_get_tx_attenuation (struct ad9361_rf_phy phy, uint8_t ch, uint32_t attenuation_mdb)

int32_t	ad9361_set_tx_rf_bandwidth (struct ad9361_rf_phy *phy, uint32_t bandwidth_hz)

int32_t	ad9361_get_tx_rf_bandwidth (struct ad9361_rf_phy phy, uint32_t bandwidth_hz)

int32_t	ad9361_set_tx_sampling_freq (struct ad9361_rf_phy *phy, uint32_t sampling_freq_hz)

int32_t	ad9361_get_tx_sampling_freq (struct ad9361_rf_phy phy, uint32_t sampling_freq_hz)

int32_t	ad9361_set_tx_lo_freq (struct ad9361_rf_phy *phy, uint64_t lo_freq_hz)

int32_t	ad9361_get_tx_lo_freq (struct ad9361_rf_phy phy, uint64_t lo_freq_hz)

int32_t	ad9361_set_tx_lo_int_ext (struct ad9361_rf_phy *phy, uint8_t int_ext)

int32_t	ad9361_set_tx_fir_config (struct ad9361_rf_phy *phy, AD9361_TXFIRConfig fir_cfg)

int32_t	ad9361_get_tx_fir_config (struct ad9361_rf_phy phy, uint8_t tx_ch, AD9361_TXFIRConfig fir_cfg)

int32_t	ad9361_set_tx_fir_en_dis (struct ad9361_rf_phy *phy, uint8_t en_dis)

int32_t	ad9361_get_tx_fir_en_dis (struct ad9361_rf_phy phy, uint8_t en_dis)

int32_t	ad9361_get_tx_rssi (struct ad9361_rf_phy phy, uint8_t ch, uint32_t rssi_db_x_1000)

int32_t	ad9361_set_tx_rf_port_output (struct ad9361_rf_phy *phy, uint32_t mode)

int32_t	ad9361_get_tx_rf_port_output (struct ad9361_rf_phy phy, uint32_t mode)

int32_t	ad9361_set_tx_auto_cal_en_dis (struct ad9361_rf_phy *phy, uint8_t en_dis)

int32_t	ad9361_get_tx_auto_cal_en_dis (struct ad9361_rf_phy phy, uint8_t en_dis)

int32_t	ad9361_tx_fastlock_store (struct ad9361_rf_phy *phy, uint32_t profile)

int32_t	ad9361_tx_fastlock_recall (struct ad9361_rf_phy *phy, uint32_t profile)

int32_t	ad9361_tx_fastlock_load (struct ad9361_rf_phy phy, uint32_t profile, uint8_t values)

int32_t	ad9361_tx_fastlock_save (struct ad9361_rf_phy phy, uint32_t profile, uint8_t values)

int32_t	ad9361_tx_lo_powerdown (struct ad9361_rf_phy *phy, uint8_t option)

int32_t	ad9361_get_tx_lo_power (struct ad9361_rf_phy phy, uint8_t option)

int32_t	ad9361_set_trx_path_clks (struct ad9361_rf_phy phy, uint32_t rx_path_clks, uint32_t *tx_path_clks)

int32_t	ad9361_get_trx_path_clks (struct ad9361_rf_phy phy, uint32_t rx_path_clks, uint32_t *tx_path_clks)

int32_t	ad9361_set_no_ch_mode (struct ad9361_rf_phy *phy, uint8_t no_ch_mode)

int32_t	ad9361_do_mcs (struct ad9361_rf_phy phy_master, struct ad9361_rf_phy phy_slave)

int32_t	ad9361_set_trx_fir_en_dis (struct ad9361_rf_phy *phy, uint8_t en_dis)

int32_t	ad9361_set_trx_rate_gov (struct ad9361_rf_phy *phy, uint32_t rate_gov)

int32_t	ad9361_get_trx_rate_gov (struct ad9361_rf_phy phy, uint32_t rate_gov)

int32_t	ad9361_do_calib (struct ad9361_rf_phy *phy, uint32_t cal, int32_t arg)

int32_t	ad9361_trx_load_enable_fir (struct ad9361_rf_phy *phy, AD9361_RXFIRConfig rx_fir_cfg, AD9361_TXFIRConfig tx_fir_cfg)

int32_t	ad9361_do_dcxo_tune_coarse (struct ad9361_rf_phy *phy, uint32_t coarse)

int32_t	ad9361_do_dcxo_tune_fine (struct ad9361_rf_phy *phy, uint32_t fine)

int32_t	ad9361_get_temperature (struct ad9361_rf_phy phy, int32_t temp)

int32_t	ad9361_tx_mute (struct ad9361_rf_phy *phy, uint32_t state)

int32_t	ad9361_ensm_mode_disable_pinctrl (struct ad9361_rf_phy *phy)

int32_t	ad9361_ensm_mode_restore_pinctrl (struct ad9361_rf_phy *phy)

int32_t	ad9361_write_clock_data_delays (struct ad9361_rf_phy *phy)

int32_t	ad9361_read_clock_data_delays (struct ad9361_rf_phy *phy)

int32_t	ad9361_set_cal_sw (struct ad9361_rf_phy *phy, uint32_t val)

int32_t	ad9361_write_bist_reg (struct ad9361_rf_phy *phy, uint32_t val)

int32_t	ad9361_get_dig_tune_data (struct ad9361_rf_phy phy, struct ad9361_dig_tune_data data)

int32_t	ad9361_rssi_program_lna_gain (struct ad9361_rf_phy *phy)

int32_t	ad9361_rssi_write_err_tbl (struct ad9361_rf_phy *phy)

Detailed Description

Header file of AD9361 API Driver.

Author: DBogdan (drago.nosp@m.s.bo.nosp@m.gdan@.nosp@m.anal.nosp@m.og.co.nosp@m.m)

SPDX-License-Identifier: BSD-3-Clause

Macro Definition Documentation

◆ A_BALANCED

#define A_BALANCED 0

◆ A_N

#define A_N 3

◆ A_P

#define A_P 4

◆ B_BALANCED

#define B_BALANCED 1

◆ B_N

#define B_N 5

◆ B_P

#define B_P 6

◆ C_BALANCED

#define C_BALANCED 2

◆ C_N

#define C_N 7

◆ C_P

#define C_P 8

◆ DISABLE

#define DISABLE 0

◆ ENABLE

#define ENABLE 1

◆ EXT_LO

#define EXT_LO 1

◆ HIGHEST_OSR

#define HIGHEST_OSR 0

◆ INT_LO

#define INT_LO 0

◆ MODE_1x1

#define MODE_1x1 1

◆ MODE_2x2

#define MODE_2x2 2

◆ NOMINAL_OSR

#define NOMINAL_OSR 1

◆ OFF

#define OFF 1

◆ ON

#define ON 0

◆ RX1

#define RX1 0

◆ RX2

#define RX2 1

◆ TX1

#define TX1 0

◆ TX2

#define TX2 1

◆ TX_MON1

#define TX_MON1 9

◆ TX_MON1_2

#define TX_MON1_2 11

◆ TX_MON2

#define TX_MON2 10

◆ TXA

#define TXA 0

◆ TXB

#define TXB 1

Enumeration Type Documentation

◆ ad9361_ensm_mode

enum ad9361_ensm_mode

Enumerator
ENSM_MODE_TX
ENSM_MODE_RX
ENSM_MODE_ALERT
ENSM_MODE_FDD
ENSM_MODE_WAIT
ENSM_MODE_SLEEP
ENSM_MODE_PINCTRL
ENSM_MODE_PINCTRL_FDD_INDEP

Function Documentation

◆ ad9361_do_calib()

int32_t ad9361_do_calib	(	struct ad9361_rf_phy *	phy,
		uint32_t	cal,
		int32_t	arg )

Perform the selected calibration.

Parameters

phy	The AD9361 state structure.
cal	The selected calibration (TX_QUAD_CAL, RFDC_CAL). Accepted values: TX_QUAD_CAL RFDC_CAL
arg	For TX_QUAD_CAL - the optional RX phase value overwrite (set to zero).

Returns: 0 in case of success, negative error code otherwise.

Note: This function will/may affect the data path.

◆ ad9361_do_dcxo_tune_coarse()

int32_t ad9361_do_dcxo_tune_coarse	(	struct ad9361_rf_phy *	phy,
		uint32_t	coarse )

Do DCXO coarse tuning.

Parameters

phy	The AD9361 current state structure.
coarse	The DCXO coarse tuning value.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_do_dcxo_tune_fine()

int32_t ad9361_do_dcxo_tune_fine	(	struct ad9361_rf_phy *	phy,
		uint32_t	fine )

Do DCXO fine tuning.

Parameters

phy	The AD9361 current state structure.
fine	The DCXO fine tuning value.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_do_mcs()

int32_t ad9361_do_mcs	(	struct ad9361_rf_phy *	phy_master,
		struct ad9361_rf_phy *	phy_slave )

Do multi chip synchronization.

Parameters

phy_master	The AD9361 Master state structure.
phy_slave	The AD9361 Slave state structure.

Returns: 0 in case of success, negative error code otherwise.

Note: This function will/may affect the data path.

◆ ad9361_ensm_mode_disable_pinctrl()

int32_t ad9361_ensm_mode_disable_pinctrl ( struct ad9361_rf_phy * phy )

Temporarily disable ENSM pin control by forcing TDD SPI mode. Useful before calibration sequences that must use SPI-driven state.

Parameters

phy	The AD9361 state structure.

Returns: 0 on success, negative error code otherwise.

◆ ad9361_ensm_mode_restore_pinctrl()

int32_t ad9361_ensm_mode_restore_pinctrl ( struct ad9361_rf_phy * phy )

Restore ENSM pin control to the state configured in pdata.

Parameters

phy	The AD9361 state structure.

Returns: 0 on success, negative error code otherwise.

◆ ad9361_get_dig_tune_data()

int32_t ad9361_get_dig_tune_data	(	struct ad9361_rf_phy *	phy,
		struct ad9361_dig_tune_data *	data )

Return the current digital interface tuning state.

Parameters

phy	The AD9361 state structure.
data	Output: populated with skip_mode and current delay register values.

Returns: 0 on success, negative error code otherwise.

◆ ad9361_get_en_state_machine_mode()

int32_t ad9361_get_en_state_machine_mode	(	struct ad9361_rf_phy *	phy,
		uint32_t *	mode )

Get the Enable State Machine (ENSM) mode.

Parameters

phy	The AD9361 current state structure.
mode	A variable to store the selected ENSM mode.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_rx_bbdc_track_en_dis()

int32_t ad9361_get_rx_bbdc_track_en_dis	(	struct ad9361_rf_phy *	phy,
		uint8_t *	en_dis )

Get the status of the RX BasebandDC Tracking.

Parameters

phy	The AD9361 current state structure.
en_dis	The enable/disable status buffer.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_rx_fir_config()

int32_t ad9361_get_rx_fir_config	(	struct ad9361_rf_phy *	phy,
		uint8_t	rx_ch,
		AD9361_RXFIRConfig *	fir_cfg )

Get the RX FIR filter configuration.

Parameters

phy	The AD9361 current state structure.
rx_ch	The selected RX channel (RX1, RX2). Accepted values: RX1 (0) RX2 (1)
fir_cfg	FIR filter configuration output file.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_rx_fir_en_dis()

int32_t ad9361_get_rx_fir_en_dis	(	struct ad9361_rf_phy *	phy,
		uint8_t *	en_dis )

Get the status of the RX FIR filter.

Parameters

phy	The AD9361 current state structure.
en_dis	The enable/disable status buffer.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_rx_gain_control_mode()

int32_t ad9361_get_rx_gain_control_mode	(	struct ad9361_rf_phy *	phy,
		uint8_t	ch,
		uint8_t *	gc_mode )

Get the gain control mode for the selected channel.

Parameters

phy	The AD9361 current state structure.
ch	The desired channel (RX1, RX2). Accepted values: RX1 (0) RX2 (1)
gc_mode	A variable to store the gain control mode.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_rx_lo_freq()

int32_t ad9361_get_rx_lo_freq	(	struct ad9361_rf_phy *	phy,
		uint64_t *	lo_freq_hz )

Get current RX LO frequency.

Parameters

phy	The AD9361 current state structure.
lo_freq_hz	A variable to store the frequency value (Hz).

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_rx_lo_power()

int32_t ad9361_get_rx_lo_power	(	struct ad9361_rf_phy *	phy,
		uint8_t *	option )

Get the RX Local Oscillator power status.

Parameters

phy	The AD9361 state structure.
option	Store the option (ON, OFF).

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_rx_quad_track_en_dis()

int32_t ad9361_get_rx_quad_track_en_dis	(	struct ad9361_rf_phy *	phy,
		uint8_t *	en_dis )

Get the status of the RX Quadrature Tracking.

Parameters

phy	The AD9361 current state structure.
en_dis	The enable/disable status buffer.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_rx_rf_bandwidth()

int32_t ad9361_get_rx_rf_bandwidth	(	struct ad9361_rf_phy *	phy,
		uint32_t *	bandwidth_hz )

Get the RX RF bandwidth.

Parameters

phy	The AD9361 current state structure.
bandwidth_hz	A variable to store the bandwidth value (Hz).

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_rx_rf_gain()

int32_t ad9361_get_rx_rf_gain	(	struct ad9361_rf_phy *	phy,
		uint8_t	ch,
		int32_t *	gain_db )

Get current receive RF gain for the selected channel.

Parameters

phy	The AD9361 current state structure.
ch	The desired channel number (RX1, RX2). Accepted values in 2x2 mode: RX1 (0) RX2 (1) Accepted values in 1x1 mode: RX1 (0)
gain_db	A variable to store the RF gain (dB).

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_rx_rf_port_input()

int32_t ad9361_get_rx_rf_port_input	(	struct ad9361_rf_phy *	phy,
		uint32_t *	mode )

Get the selected RX RF input port.

Parameters

phy	The AD9361 current state structure.
mode	The RF port.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_rx_rfdc_track_en_dis()

int32_t ad9361_get_rx_rfdc_track_en_dis	(	struct ad9361_rf_phy *	phy,
		uint8_t *	en_dis )

Get the status of the RX RFDC Tracking.

Parameters

phy	The AD9361 current state structure.
en_dis	The enable/disable status buffer.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_rx_rssi()

int32_t ad9361_get_rx_rssi	(	struct ad9361_rf_phy *	phy,
		uint8_t	ch,
		struct rf_rssi *	rssi )

Get the RSSI for the selected channel.

Parameters

phy	The AD9361 current state structure.
ch	The desired channel (RX1, RX2). Accepted values in 2x2 mode: RX1 (0) RX2 (1) Accepted values in 1x1 mode: RX1 (0)
rssi	A variable to store the RSSI.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_rx_sampling_freq()

int32_t ad9361_get_rx_sampling_freq	(	struct ad9361_rf_phy *	phy,
		uint32_t *	sampling_freq_hz )

Get current RX sampling frequency.

Parameters

phy	The AD9361 current state structure.
sampling_freq_hz	A variable to store the frequency value (Hz).

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_temperature()

int32_t ad9361_get_temperature	(	struct ad9361_rf_phy *	phy,
		int32_t *	temp )

Get the temperature.

Parameters

phy	The AD9361 current state structure.
temp	The temperature (degrees C * 1000).

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_trx_path_clks()

int32_t ad9361_get_trx_path_clks	(	struct ad9361_rf_phy *	phy,
		uint32_t *	rx_path_clks,
		uint32_t *	tx_path_clks )

Get the RX and TX path rates.

Parameters

phy	The AD9361 state structure.
rx_path_clks	RX path rates buffer.
tx_path_clks	TX path rates buffer.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_trx_rate_gov()

int32_t ad9361_get_trx_rate_gov	(	struct ad9361_rf_phy *	phy,
		uint32_t *	rate_gov )

Get the OSR rate governor.

Parameters

phy	The AD9361 current state structure.
rate_gov	Option buffer.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_tx_attenuation()

int32_t ad9361_get_tx_attenuation	(	struct ad9361_rf_phy *	phy,
		uint8_t	ch,
		uint32_t *	attenuation_mdb )

Get current transmit attenuation for the selected channel.

Parameters

phy	The AD9361 current state structure.
ch	The desired channel number (TX1, TX2). Accepted values in 2x2 mode: TX1 (0) TX2 (1) Accepted values in 1x1 mode: TX1 (0)
attenuation_mdb	A variable to store the attenuation value (mdB).

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_tx_auto_cal_en_dis()

int32_t ad9361_get_tx_auto_cal_en_dis	(	struct ad9361_rf_phy *	phy,
		uint8_t *	en_dis )

Get the status of the auto calibration flag.

Parameters

phy	The AD9361 current state structure.
en_dis	The enable/disable status buffer.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_tx_fir_config()

int32_t ad9361_get_tx_fir_config	(	struct ad9361_rf_phy *	phy,
		uint8_t	tx_ch,
		AD9361_TXFIRConfig *	fir_cfg )

Get the TX FIR filter configuration.

Parameters

phy	The AD9361 current state structure.
tx_ch	The selected TX channel (TX1, TX2). Accepted values: TX1 (0) TX2 (1)
fir_cfg	FIR filter configuration output file.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_tx_fir_en_dis()

int32_t ad9361_get_tx_fir_en_dis	(	struct ad9361_rf_phy *	phy,
		uint8_t *	en_dis )

Get the status of the TX FIR filter.

Parameters

phy	The AD9361 current state structure.
en_dis	The enable/disable status buffer.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_tx_lo_freq()

int32_t ad9361_get_tx_lo_freq	(	struct ad9361_rf_phy *	phy,
		uint64_t *	lo_freq_hz )

Get current TX LO frequency.

Parameters

phy	The AD9361 current state structure.
lo_freq_hz	A variable to store the frequency value (Hz).

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_tx_lo_power()

int32_t ad9361_get_tx_lo_power	(	struct ad9361_rf_phy *	phy,
		uint8_t *	option )

Get the TX Local Oscillator power status.

Parameters

phy	The AD9361 state structure.
option	Store the option (ON, OFF).

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_tx_rf_bandwidth()

int32_t ad9361_get_tx_rf_bandwidth	(	struct ad9361_rf_phy *	phy,
		uint32_t *	bandwidth_hz )

Get the TX RF bandwidth.

Parameters

phy	The AD9361 current state structure.
bandwidth_hz	A variable to store the bandwidth value (Hz).

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_tx_rf_port_output()

int32_t ad9361_get_tx_rf_port_output	(	struct ad9361_rf_phy *	phy,
		uint32_t *	mode )

Get the selected TX RF output port.

Parameters

phy	The AD9361 current state structure.
mode	The RF port.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_tx_rssi()

int32_t ad9361_get_tx_rssi	(	struct ad9361_rf_phy *	phy,
		uint8_t	ch,
		uint32_t *	rssi_db_x_1000 )

Get the TX RSSI for the selected channel (TX_MON should be enabled).

Parameters

phy	The AD9361 current state structure.
ch	The desired channel (TX1, TX2). Accepted values: TX1 (0) TX2 (1)
rssi_db_x_1000	A variable to store the RSSI.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_get_tx_sampling_freq()

int32_t ad9361_get_tx_sampling_freq	(	struct ad9361_rf_phy *	phy,
		uint32_t *	sampling_freq_hz )

Get current TX sampling frequency.

Parameters

phy	The AD9361 current state structure.
sampling_freq_hz	A variable to store the frequency value (Hz).

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_init()

int32_t ad9361_init	(	struct ad9361_rf_phy **	ad9361_phy,
		AD9361_InitParam *	init_param )

Initialize the AD9361 part.

Parameters

ad9361_phy	The AD9361 device structure.
init_param	The structure that contains the AD9361 initial parameters.

Returns: 0 in case of success, negative error code otherwise.

Note: This function will/may affect the data path.

◆ ad9361_read_clock_data_delays()

int32_t ad9361_read_clock_data_delays ( struct ad9361_rf_phy * phy )

Read the current RX and TX clock/data delay register values back into pdata. Call this after ad9361_dig_tune() to persist the tuned values.

Parameters

phy	The AD9361 state structure.

Returns: 0 on success, negative error code otherwise.

◆ ad9361_remove()

int32_t ad9361_remove ( struct ad9361_rf_phy * phy )

Free the allocated resources.

Parameters

phy	The AD9361 current state structure.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_rssi_program_lna_gain()

int32_t ad9361_rssi_program_lna_gain ( struct ad9361_rf_phy * phy )

Program the LNA gain step values from pdata->rssi_gain_step_calib_reg_val into the AD9361 gain-step calibration table.

Parameters

phy	The AD9361 state structure.

Returns: 0 on success, negative error code otherwise.

◆ ad9361_rssi_write_err_tbl()

int32_t ad9361_rssi_write_err_tbl ( struct ad9361_rf_phy * phy )

Write the pre-loaded LNA and mixer error tables from pdata into hardware.

Parameters

phy	The AD9361 state structure.

Returns: 0 on success, negative error code otherwise.

◆ ad9361_rx_fastlock_load()

int32_t ad9361_rx_fastlock_load	(	struct ad9361_rf_phy *	phy,
		uint32_t	profile,
		uint8_t *	values )

Load RX fastlock profile. A previously saved profile can be loaded in any of the 8 available slots.

Parameters

phy	The AD9361 state structure.
profile	The profile number (0 - 7). Accepted values: 0 - 7
values	Fastlock profile program data. Example: val0,val1,val2,,val15

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_rx_fastlock_recall()

int32_t ad9361_rx_fastlock_recall	(	struct ad9361_rf_phy *	phy,
		uint32_t	profile )

Recall specified RX fastlock profile. When in fastlock pin select mode (init_param->rx_fastlock_pincontrol_enable), the function needs to be called before then the pin-control can be used.

Parameters

phy	The AD9361 state structure.
profile	The profile number (0 - 7). Accepted values: 0 - 7

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_rx_fastlock_save()

int32_t ad9361_rx_fastlock_save	(	struct ad9361_rf_phy *	phy,
		uint32_t	profile,
		uint8_t *	values )

Save RX fastlock profile. In order to use more than 8 Profiles, an existing profile can be read back and stored by the user application.

Parameters

phy	The AD9361 state structure.
profile	The profile number (0 - 7). Accepted values: 0 - 7
values	Fastlock profile program data.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_rx_fastlock_store()

int32_t ad9361_rx_fastlock_store	(	struct ad9361_rf_phy *	phy,
		uint32_t	profile )

Store RX fastlock profile. To create a profile tune the synthesizer (ad9361_set_rx_lo_freq()) and then call this function specifying the target profile number.

Parameters

phy	The AD9361 state structure.
profile	The profile number (0 - 7). Accepted values: 0 - 7

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_rx_lo_powerdown()

int32_t ad9361_rx_lo_powerdown	(	struct ad9361_rf_phy *	phy,
		uint8_t	option )

Power down the RX Local Oscillator.

Parameters

phy	The AD9361 state structure.
option	The option (ON, OFF). Accepted values: ON (0) OFF (1)

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_set_cal_sw()

int32_t ad9361_set_cal_sw	(	struct ad9361_rf_phy *	phy,
		uint32_t	val )

Drive the external calibration switch GPIOs (cal-sw1, cal-sw2). Bit 0 of val controls cal-sw1, bit 1 controls cal-sw2. These GPIOs route signals for TX quad / LO calibration on boards that have external calibration switch hardware.

Parameters

phy	The AD9361 state structure.
val	2-bit value: bit0 = cal_sw1, bit1 = cal_sw2.

Returns: 0 on success, -ENODEV if GPIOs are not configured.

◆ ad9361_set_en_state_machine_mode()

int32_t ad9361_set_en_state_machine_mode	(	struct ad9361_rf_phy *	phy,
		uint32_t	mode )

Set the Enable State Machine (ENSM) mode.

Parameters

phy	The AD9361 current state structure.
mode	The ENSM mode. Accepted values: ENSM_MODE_TX ENSM_MODE_RX ENSM_MODE_ALERT ENSM_MODE_FDD ENSM_MODE_WAIT ENSM_MODE_SLEEP ENSM_MODE_PINCTRL ENSM_MODE_PINCTRL_FDD_INDEP

Returns: 0 in case of success, negative error code otherwise.

Note: This function will/may affect the data path.

◆ ad9361_set_no_ch_mode()

int32_t ad9361_set_no_ch_mode	(	struct ad9361_rf_phy *	phy,
		uint8_t	no_ch_mode )

Set the number of channels mode.

Parameters

phy	The AD9361 state structure. Note: This function also resets the device, some additional configurations might be necessary
no_ch_mode	Number of channels mode (MODE_1x1, MODE_2x2). Accepted values: MODE_1x1 (1) MODE_2x2 (2)

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_set_rx_bbdc_track_en_dis()

int32_t ad9361_set_rx_bbdc_track_en_dis	(	struct ad9361_rf_phy *	phy,
		uint8_t	en_dis )

Enable/disable the RX BasebandDC Tracking.

Parameters

phy	The AD9361 current state structure.
en_dis	The option (ENABLE, DISABLE). Accepted values: ENABLE (1) DISABLE (0)

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_set_rx_fir_config()

int32_t ad9361_set_rx_fir_config	(	struct ad9361_rf_phy *	phy,
		AD9361_RXFIRConfig	fir_cfg )

Set the RX FIR filter configuration.

Parameters

phy	The AD9361 current state structure.
fir_cfg	FIR filter configuration.

Returns: 0 in case of success, negative error code otherwise.

Note: This function will/may affect the data path.

◆ ad9361_set_rx_fir_en_dis()

int32_t ad9361_set_rx_fir_en_dis	(	struct ad9361_rf_phy *	phy,
		uint8_t	en_dis )

Enable/disable the RX FIR filter.

Parameters

phy	The AD9361 current state structure.
en_dis	The option (ENABLE, DISABLE). Accepted values: ENABLE (1) DISABLE (0)

Returns: 0 in case of success, negative error code otherwise.

Note: This function will/may affect the data path.

◆ ad9361_set_rx_gain_control_mode()

int32_t ad9361_set_rx_gain_control_mode	(	struct ad9361_rf_phy *	phy,
		uint8_t	ch,
		uint8_t	gc_mode )

Set the gain control mode for the selected channel.

Parameters

phy	The AD9361 current state structure.
ch	The desired channel (RX1, RX2). Accepted values in 2x2 mode: RX1 (0) RX2 (1) Accepted values in 1x1 mode: RX1 (0)
gc_mode	The gain control mode (manual, fast_attack, slow_attack, hybrid). Accepted values: RF_GAIN_MGC (manual) RF_GAIN_FASTATTACK_AGC (fast_attack) RF_GAIN_SLOWATTACK_AGC (slow_attack) RF_GAIN_HYBRID_AGC (hybrid)

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_set_rx_lo_freq()

int32_t ad9361_set_rx_lo_freq	(	struct ad9361_rf_phy *	phy,
		uint64_t	lo_freq_hz )

Set the RX LO frequency.

Parameters

phy	The AD9361 current state structure.
lo_freq_hz	The desired frequency (Hz). Example: 2400000000 (2.4 GHz)

Returns: 0 in case of success, negative error code otherwise.

Note: This function will/may affect the data path.

◆ ad9361_set_rx_lo_int_ext()

int32_t ad9361_set_rx_lo_int_ext	(	struct ad9361_rf_phy *	phy,
		uint8_t	int_ext )

Switch between internal and external LO.

Parameters

phy	The AD9361 state structure.
int_ext	The selected lo (INT_LO, EXT_LO). Accepted values: INT_LO EXT_LO

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_set_rx_quad_track_en_dis()

int32_t ad9361_set_rx_quad_track_en_dis	(	struct ad9361_rf_phy *	phy,
		uint8_t	en_dis )

Enable/disable the RX Quadrature Tracking.

Parameters

phy	The AD9361 current state structure.
en_dis	The option (ENABLE, DISABLE). Accepted values: ENABLE (1) DISABLE (0)

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_set_rx_rf_bandwidth()

int32_t ad9361_set_rx_rf_bandwidth	(	struct ad9361_rf_phy *	phy,
		uint32_t	bandwidth_hz )

Set the RX RF bandwidth.

Parameters

phy	The AD9361 current state structure.
bandwidth_hz	The desired bandwidth (Hz). Example: 18000000 (18 MHz)

Returns: 0 in case of success, negative error code otherwise.

Note: This function will/may affect the data path.

◆ ad9361_set_rx_rf_gain()

int32_t ad9361_set_rx_rf_gain	(	struct ad9361_rf_phy *	phy,
		uint8_t	ch,
		int32_t	gain_db )

Set the receive RF gain for the selected channel.

Parameters

phy	The AD9361 current state structure.
ch	The desired channel number (RX1, RX2). Accepted values in 2x2 mode: RX1 (0) RX2 (1) Accepted values in 1x1 mode: RX1 (0)
gain_db	The RF gain (dB). Example: 10 (10 dB)

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_set_rx_rf_port_input()

int32_t ad9361_set_rx_rf_port_input	(	struct ad9361_rf_phy *	phy,
		uint32_t	mode )

Set the RX RF input port.

Parameters

phy The AD9361 current state structure.

mode The RF port. Accepted values: A_BALANCED (0 - (RX1A_N & RX1A_P) and (RX2A_N & RX2A_P) enabled; balanced) B_BALANCED (1 - (RX1B_N & RX1B_P) and (RX2B_N & RX2B_P) enabled; balanced) C_BALANCED (2 - (RX1C_N & RX1C_P) and (RX2C_N & RX2C_P) enabled; balanced) A_N (3 - RX1A_N and RX2A_N enabled; unbalanced) A_P (4 - RX1A_P and RX2A_P enabled; unbalanced) B_N (5 - RX1B_N and RX2B_N enabled; unbalanced) B_P (6 - RX1B_P and RX2B_P enabled; unbalanced) C_N (7 - RX1C_N and RX2C_N enabled; unbalanced) C_P (8 - RX1C_P and RX2C_P enabled; unbalanced) TX_MON1 (9 - TX_MONITOR1) TX_MON2 (10 - TX_MONITOR2) TX_MON1_2 (11 - TX_MONITOR1 & TX_MONITOR2)

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_set_rx_rfdc_track_en_dis()

int32_t ad9361_set_rx_rfdc_track_en_dis	(	struct ad9361_rf_phy *	phy,
		uint8_t	en_dis )

Enable/disable the RX RFDC Tracking.

Parameters

phy	The AD9361 current state structure.
en_dis	The option (ENABLE, DISABLE). Accepted values: ENABLE (1) DISABLE (0)

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_set_rx_sampling_freq()

int32_t ad9361_set_rx_sampling_freq	(	struct ad9361_rf_phy *	phy,
		uint32_t	sampling_freq_hz )

Set the RX sampling frequency.

Parameters

phy	The AD9361 current state structure.
sampling_freq_hz	The desired frequency (Hz). Example: 30720000 (30.72 MHz)

Returns: 0 in case of success, negative error code otherwise.

Note: This function will/may affect the data path.

◆ ad9361_set_trx_fir_en_dis()

int32_t ad9361_set_trx_fir_en_dis	(	struct ad9361_rf_phy *	phy,
		uint8_t	en_dis )

Enable/disable the TRX FIR filters.

Parameters

phy	The AD9361 current state structure.
en_dis	The option (ENABLE, DISABLE). Accepted values: ENABLE (1) DISABLE (0)

Returns: 0 in case of success, negative error code otherwise.

Note: This function will/may affect the data path.

◆ ad9361_set_trx_path_clks()

int32_t ad9361_set_trx_path_clks	(	struct ad9361_rf_phy *	phy,
		uint32_t *	rx_path_clks,
		uint32_t *	tx_path_clks )

Set the RX and TX path rates.

Parameters

phy	The AD9361 state structure.
rx_path_clks	RX path rates buffer.
tx_path_clks	TX path rates buffer.

Returns: 0 in case of success, negative error code otherwise.

Note: This function will/may affect the data path.

◆ ad9361_set_trx_rate_gov()

int32_t ad9361_set_trx_rate_gov	(	struct ad9361_rf_phy *	phy,
		uint32_t	rate_gov )

Set the OSR rate governor.

Parameters

phy	The AD9361 current state structure.
rate_gov	OSR rate governor (highest, nominal). Accepted values: HIGHEST_OSR (0 - highest OSR) NOMINAL_OSR (1 - nominal)

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_set_tx_attenuation()

int32_t ad9361_set_tx_attenuation	(	struct ad9361_rf_phy *	phy,
		uint8_t	ch,
		uint32_t	attenuation_mdb )

Set the transmit attenuation for the selected channel.

Parameters

phy	The AD9361 current state structure.
ch	The desired channel number (TX1, TX2). Accepted values in 2x2 mode: TX1 (0) TX2 (1) Accepted values in 1x1 mode: TX1 (0)
attenuation_mdb	The attenuation (mdB). Example: 10000 (10 dB)

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_set_tx_auto_cal_en_dis()

int32_t ad9361_set_tx_auto_cal_en_dis	(	struct ad9361_rf_phy *	phy,
		uint8_t	en_dis )

Enable/disable the auto calibration.

Parameters

phy	The AD9361 current state structure.
en_dis	The option (ENABLE, DISABLE). Accepted values: ENABLE (1) DISABLE (0)

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_set_tx_fir_config()

int32_t ad9361_set_tx_fir_config	(	struct ad9361_rf_phy *	phy,
		AD9361_TXFIRConfig	fir_cfg )

Set the TX FIR filter configuration.

Parameters

phy	The AD9361 current state structure.
fir_cfg	FIR filter configuration.

Returns: 0 in case of success, negative error code otherwise.

Note: This function will/may affect the data path.

◆ ad9361_set_tx_fir_en_dis()

int32_t ad9361_set_tx_fir_en_dis	(	struct ad9361_rf_phy *	phy,
		uint8_t	en_dis )

Enable/disable the TX FIR filter.

Parameters

phy	The AD9361 current state structure.
en_dis	The option (ENABLE, DISABLE). Accepted values: ENABLE (1) DISABLE (0)

Returns: 0 in case of success, negative error code otherwise.

Note: This function will/may affect the data path.

◆ ad9361_set_tx_lo_freq()

int32_t ad9361_set_tx_lo_freq	(	struct ad9361_rf_phy *	phy,
		uint64_t	lo_freq_hz )

Set the TX LO frequency.

Parameters

phy	The AD9361 current state structure.
lo_freq_hz	The desired frequency (Hz). Example: 2400000000 (2.4 GHz)

Returns: 0 in case of success, negative error code otherwise.

Note: This function will/may affect the data path.

◆ ad9361_set_tx_lo_int_ext()

int32_t ad9361_set_tx_lo_int_ext	(	struct ad9361_rf_phy *	phy,
		uint8_t	int_ext )

Switch between internal and external LO.

Parameters

phy	The AD9361 state structure.
int_ext	The selected lo (INT_LO, EXT_LO). Accepted values: INT_LO EXT_LO

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_set_tx_rf_bandwidth()

int32_t ad9361_set_tx_rf_bandwidth	(	struct ad9361_rf_phy *	phy,
		uint32_t	bandwidth_hz )

Set the TX RF bandwidth.

Parameters

phy	The AD9361 current state structure.
bandwidth_hz	The desired bandwidth (Hz). Example: 18000000 (18 MHz)

Returns: 0 in case of success, negative error code otherwise.

Note: This function will/may affect the data path.

◆ ad9361_set_tx_rf_port_output()

int32_t ad9361_set_tx_rf_port_output	(	struct ad9361_rf_phy *	phy,
		uint32_t	mode )

Set the TX RF output port.

Parameters

phy	The AD9361 current state structure.
mode	The RF port. Accepted values: TXA (0) TXB (1)

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_set_tx_sampling_freq()

int32_t ad9361_set_tx_sampling_freq	(	struct ad9361_rf_phy *	phy,
		uint32_t	sampling_freq_hz )

Set the TX sampling frequency.

Parameters

phy	The AD9361 current state structure.
sampling_freq_hz	The desired frequency (Hz). Example: 30720000 (30.72 MHz)

Returns: 0 in case of success, negative error code otherwise.

Note: This function will/may affect the data path.

◆ ad9361_trx_load_enable_fir()

int32_t ad9361_trx_load_enable_fir	(	struct ad9361_rf_phy *	phy,
		AD9361_RXFIRConfig	rx_fir_cfg,
		AD9361_TXFIRConfig	tx_fir_cfg )

Load and enable TRX FIR filters configurations.

Parameters

phy	The AD9361 current state structure.
rx_fir_cfg	RX FIR filter configuration.
tx_fir_cfg	TX FIR filter configuration.

Returns: 0 in case of success, negative error code otherwise.

Note: This function will/may affect the data path.

◆ ad9361_tx_fastlock_load()

int32_t ad9361_tx_fastlock_load	(	struct ad9361_rf_phy *	phy,
		uint32_t	profile,
		uint8_t *	values )

Load TX fastlock profile. A previously saved profile can be loaded in any of the 8 available slots.

Parameters

phy	The AD9361 state structure.
profile	The profile number (0 - 7). Accepted values: 0 - 7
values	Fastlock profile program data. Example: val0,val1,val2,,val15

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_tx_fastlock_recall()

int32_t ad9361_tx_fastlock_recall	(	struct ad9361_rf_phy *	phy,
		uint32_t	profile )

Recall specified TX fastlock profile. When in fastlock pin select mode (init_param->tx_fastlock_pincontrol_enable), the function needs to be called before then the pin-control can be used.

Parameters

phy	The AD9361 state structure.
profile	The profile number (0 - 7). Accepted values: 0 - 7

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_tx_fastlock_save()

int32_t ad9361_tx_fastlock_save	(	struct ad9361_rf_phy *	phy,
		uint32_t	profile,
		uint8_t *	values )

Save TX fastlock profile. In order to use more than 8 Profiles, an existing profile can be read back and stored by the user application.

Parameters

phy	The AD9361 state structure.
profile	The profile number (0 - 7). Accepted values: 0 - 7
values	Fastlock profile program data.

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_tx_fastlock_store()

int32_t ad9361_tx_fastlock_store	(	struct ad9361_rf_phy *	phy,
		uint32_t	profile )

Store TX fastlock profile. To create a profile tune the synthesizer (ad9361_set_tx_lo_freq()) and then call this function specifying the target profile number.

Parameters

phy	The AD9361 state structure.
profile	The profile number (0 - 7). Accepted values: 0 - 7

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_tx_lo_powerdown()

int32_t ad9361_tx_lo_powerdown	(	struct ad9361_rf_phy *	phy,
		uint8_t	option )

Power down the TX Local Oscillator.

Parameters

phy	The AD9361 state structure.
option	The option (ON, OFF). Accepted values: ON (0) OFF (1)

Returns: 0 in case of success, negative error code otherwise.

◆ ad9361_tx_mute()

int32_t ad9361_tx_mute	(	struct ad9361_rf_phy *	phy,
		uint32_t	state )

Mute TX.

Parameters

phy	The AD9361 state structure.
state	The state - 0 mute; 1 - unmute.

Returns: 0 in case of success

◆ ad9361_write_bist_reg()

int32_t ad9361_write_bist_reg	(	struct ad9361_rf_phy *	phy,
		uint32_t	val )

Write directly to the AD9361 BIST configuration register.

Parameters

phy	The AD9361 state structure.
val	Value to write.

Returns: 0 on success, negative error code otherwise.

◆ ad9361_write_clock_data_delays()

int32_t ad9361_write_clock_data_delays ( struct ad9361_rf_phy * phy )

Write the saved RX and TX clock/data delay values from pdata to hardware. Call this at startup to restore previously tuned values and skip dig_tune.

Parameters

phy	The AD9361 state structure.

Returns: 0 on success, negative error code otherwise.

Classes

Macros

Enumerations

Functions

Detailed Description

Macro Definition Documentation

◆ A_BALANCED

◆ A_N

◆ A_P

◆ B_BALANCED

◆ B_N

◆ B_P

◆ C_BALANCED

◆ C_N

◆ C_P

◆ DISABLE

◆ ENABLE

◆ EXT_LO

◆ HIGHEST_OSR

◆ INT_LO

◆ MODE_1x1

◆ MODE_2x2

◆ NOMINAL_OSR

◆ OFF

◆ ON

◆ RX1

◆ RX2

◆ TX1

◆ TX2

◆ TX_MON1

◆ TX_MON1_2

◆ TX_MON2

◆ TXA

◆ TXB

Enumeration Type Documentation

◆ ad9361_ensm_mode

Function Documentation

◆ ad9361_do_calib()

◆ ad9361_do_dcxo_tune_coarse()

◆ ad9361_do_dcxo_tune_fine()

◆ ad9361_do_mcs()

◆ ad9361_ensm_mode_disable_pinctrl()

◆ ad9361_ensm_mode_restore_pinctrl()

◆ ad9361_get_dig_tune_data()

◆ ad9361_get_en_state_machine_mode()

◆ ad9361_get_rx_bbdc_track_en_dis()

◆ ad9361_get_rx_fir_config()

◆ ad9361_get_rx_fir_en_dis()

◆ ad9361_get_rx_gain_control_mode()

◆ ad9361_get_rx_lo_freq()

◆ ad9361_get_rx_lo_power()

◆ ad9361_get_rx_quad_track_en_dis()

◆ ad9361_get_rx_rf_bandwidth()

◆ ad9361_get_rx_rf_gain()

◆ ad9361_get_rx_rf_port_input()

◆ ad9361_get_rx_rfdc_track_en_dis()

◆ ad9361_get_rx_rssi()

◆ ad9361_get_rx_sampling_freq()

◆ ad9361_get_temperature()

◆ ad9361_get_trx_path_clks()

◆ ad9361_get_trx_rate_gov()

◆ ad9361_get_tx_attenuation()

◆ ad9361_get_tx_auto_cal_en_dis()

◆ ad9361_get_tx_fir_config()

◆ ad9361_get_tx_fir_en_dis()

◆ ad9361_get_tx_lo_freq()

◆ ad9361_get_tx_lo_power()

◆ ad9361_get_tx_rf_bandwidth()

◆ ad9361_get_tx_rf_port_output()

◆ ad9361_get_tx_rssi()

◆ ad9361_get_tx_sampling_freq()

◆ ad9361_init()

◆ ad9361_read_clock_data_delays()

◆ ad9361_remove()

◆ ad9361_rssi_program_lna_gain()

◆ ad9361_rssi_write_err_tbl()

◆ ad9361_rx_fastlock_load()

◆ ad9361_rx_fastlock_recall()

◆ ad9361_rx_fastlock_save()

◆ ad9361_rx_fastlock_store()