Skip to content

ad9783 Reference Design Integration

This page outlines the HDL reference design integration for the ad9783 reference design for the Analog Devices AD9783 component. The IP-Core Generation follow is available on the based on the following base HDL reference design for the following board and design variants:

Reference Design

HDL Reference Design with Custom IP from HDL-Coder. Click on sub-blocks for more documentation.

The IP-Core generation flow will integrate IP generated from Simulink subsystem into an ADI authored reference design. Depending on the FPGA carrier and FMC card or SoM, this will support different IP locations based on the diagram above.

HDL Worflow Advisor Port Mappings

When using the HDL Worflow Advisor, the following port mappings are used to connect the reference design to the HDL-Coder generated IP-Core:

Type Target Platform Interface (MATLAB) Reference Design Connection (Vivado) Width Reference Design Variant
VALID-IN IP Valid Tx Data IN axi_ad9783/dac_valid 1 TX
DATA-OUT AD9783 DAC Data 0 OUT axi_ad9783/dac_ddata_0 64 TX
DATA-OUT AD9783 DAC Data 1 OUT axi_ad9783/dac_ddata_1 64 TX
DATA-IN IP Data 0 IN util_ad9783_dac_upack/fifo_rd_data_0 64 TX
DATA-IN IP Data 1 IN util_ad9783_dac_upack/fifo_rd_data_1 64 TX