fmcomms5

class adi.fmcomms5.FMComms5(uri='')

Bases: adi.ad936x.ad9361

FMComms5 Dual Transceiver Evaluation Board

property filter

Load FIR filter file. Provide path to filter file to attribute

property gain_control_mode_chip_b_chan0

gain_control_mode_chip_b_chan0: Mode of receive path AGC of second transceiver. Options are: slow_attack, fast_attack, manual

property gain_control_mode_chip_b_chan1

gain_control_mode_chip_b_chan1: Mode of receive path AGC of second transceiver. Options are: slow_attack, fast_attack, manual

property loopback_chip_b

loopback_chip_b: Set loopback mode of second transceiver. Options are: 0 (Disable), 1 (Digital), 2 (RF)

property rx_hardwaregain_chip_b_chan0

rx_hardwaregain_chip_b_chan0: Gain applied to RX path of second transceiver. Only applicable when gain_control_mode is set to ‘manual’

property rx_hardwaregain_chip_b_chan1

rx_hardwaregain_chip_b_chan1: Gain applied to RX path of second transceiver. Only applicable when gain_control_mode is set to ‘manual’

property rx_lo_chip_b

rx_lo_chip_b: Carrier frequency of RX path of second transceiver

property rx_rf_bandwidth_chip_b

rx_rf_bandwidth_chip_b: Bandwidth of front-end analog filter of RX path of second transceiver

property sample_rate

sample_rate: Sample rate RX and TX paths in samples per second of second transceiver

property tx_hardwaregain_chip_b_chan0

tx_hardwaregain_chip_b_chan0: Attenuation applied to TX path of second transceiver

property tx_hardwaregain_chip_b_chan1

tx_hardwaregain_chip_b_chan1: Attenuation applied to TX path of second transceiver

property tx_lo_chip_b

tx_lo_chip_b: Carrier frequency of TX path of second transceiver

property tx_rf_bandwidth_chip_b

tx_rf_bandwidth_chip_b: Bandwidth of front-end analog filter of TX path of second transceiver