Homepage

Note

User guide: Scopy Overview.

Note

Tester

Test Date

Scopy version

Plugin version (N/A if not applicable)

Comments

Test 1: The homepage displays correctly when running the application.

UID: TST.HP.RUN

Description: This test checks if the homepage is displayed correctly.

Preconditions:

  • Scopy is installed on the system.

  • OS: ANY.

Steps:

  1. Open Scopy.

  2. Observe the application’s behavior.

    • Expected result: The application launches without errors and the home page is displayed.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 2: Verifying the “Add device” (+) button.

UID: TST.HP.ADD

Description: This test checks if the Add device button works correctly.

Preconditions:

  • Scopy is installed on the system.

  • OS: ANY.

Steps:

  1. Open Scopy.

  2. Navigate to the application’s home page.

  3. Click on the Add device button, having a + icon.

  4. Observe the application’s behavior.

    • Expected result: The page for adding a new device is displayed in the info page section.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 3: Verifying the auto-scan feature (ON).

UID: TST.HP.AUTO_SCAN_ON

Description: This test checks if the auto-scan feature detects and lists all

available devices correctly.

Preconditions:

  • Scopy is installed on the system.

  • ADALM2000 drivers are installed on the system.

  • The “Regularly scan for new devices” preference is enabled in the preferences page.

  • OS: ANY.

Steps:

  1. Open Scopy.

  2. Ensure the Scan switch is enabled in the device browser section.

  3. Connect an ADALM2000 device to the system by USB.

  4. Observe the application’s behavior.

    • Expected result: After a short period, the device appears in the device browser section.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 4: Verifying the auto-scan feature (OFF).

UID: TST.HP.AUTO_SCAN_OFF

Description: This test checks the behavior of the application when the auto- scan is turned off.

Preconditions:

  • Scopy is installed on the system.

  • ADALM2000 drivers are installed on the system.

  • The “Regularly scan for new devices” preference is enabled in the preferences page.

  • OS: ANY.

Steps:

  1. Open Scopy.

  2. Ensure the Scan switch is disabled in the device browser section.

  3. Connect an ADALM2000 device to the system by USB.

  4. Observe the application’s behavior.

    • Expected result: The device should not be visible in the device browser.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 5: Verifying the manual scan feature.

UID: TST.HP.MANUAL_SCAN

Description: This test checks if the manual scan feature detects and lists all available devices correctly.

Preconditions:

  • Scopy is installed on the system.

  • ADALM2000 drivers are installed on the system.

  • The “Regularly scan for new devices” preference is disabled in the preferences page.

  • OS: ANY.

Steps:

  1. Open Scopy.

  2. Connect an ADALM2000 device to the system by USB.

  3. Wait a few seconds to ensure that the connection has been successfully established.

  4. Click on the Scan button.

  5. Observe the application’s behavior.

    • Expected result: The device appears in the device browser section.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 6: Navigation using the buttons in the info page.

UID: TST.HP.NAV

Description: This test checks if the navigation buttons work correctly.

Test prerequisites:
Preconditions:

  • Scopy is installed on the system.

  • ADALM2000 drivers are installed on the system.

  • OS: ANY.

Steps:

  1. Open Scopy.

  2. Ensure the Scan switch is enabled in the device browser section.

  3. Connect an ADALM2000 device to the system by USB.

  4. Wait until the device appears in device browser.

  5. Ensure that you are on “Welcome to Scopy” page.

  6. Click on the right arrow button.

    • Expected result: The info page changes from the ‘Welcome to Scopy’ page to the add page and in device browser the related button is highlighted.

    • Actual result:

  1. Click on the left arrow button.

    • Expected result: The “Welcome to Scopy” page is displayed and the related button is highlighted.

    • Actual result:

  1. Click on the left arrow button.

    • Expected result: The device’s page is displayed and the device icon is highlighted.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 7: Auto-scan behavior when the device is unplugged.

UID: TST.HP.UNPLUGGED

Description: This test checks if the auto-scan feature detects and lists all available devices correctly.

Test prerequisites:
Preconditions:

  • Scopy is installed on the system.

  • ADALM2000 drivers are installed on the system.

  • The “Regularly scan for new devices” preference is enabled in the preferences page.

  • OS: ANY.

Steps:

  1. Open Scopy.

  2. Ensure the Scan switch is enabled in the device browser section.

  3. Connect an ADALM2000 device to the system by USB.

  4. Wait until the device appears in device browser.

  5. Unplug the device.

  6. Observe the application’s behavior.

    • Expected result: The device is removed from device browser.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL