ADRV9002 Profile Generator - Test Suite

Note

Tester	Test Date	Scopy version	Plugin version (N/A if not applicable)	Comments

Prerequisites:

Scopy v2.1.0 or later with ADRV9002 plugin installed
ADRV9002 device connected
Device drivers and firmware are up to date
Reset .ini files to default by pressing Reset button in Preferences
CLI tool libadrv9002-iio installed and accessible

Setup Environment

ADRV9002.profile_generator:

libadrv9002-iio external tool must be installed and accessible
ADRV9002 device connected and detected in Scopy
System environment properly configured for external tool execution
Appropriate permissions for file I/O operations

ADRV9002.profile_no_cli:

ADRV9002 device connected but adrv9002-iio-cli NOT in PATH
Profile Generator tab accessible but CLI functionality disabled
Use for testing CLI unavailable scenarios

Profile Generator CLI Tests

Test 1: CLI Not Available

UID: TST.ADRV9002.PROFILE_GEN.CLI_NOT_AVAILABLE

Description: Verify profile generator behavior when CLI tool is not available.

OS: ANY

Preconditions:

Use ADRV9002.profile_no_cli setup

Steps:

Open Profile Generator tab
Verify action buttons are disabled

Expected result: UI elements are disabled download cli button shows

Actual result:

Check status message about CLI availability

Expected result: Clear message indicating CLI tool not found

Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 2: CLI Available but Not Compatible

UID: TST.ADRV9002.PROFILE_GEN.CLI_NOT_COMPATIBLE

Description: Verify profile generator behavior when CLI tool is available but not compatible version.

OS: ANY

Preconditions:

ADRV9002 device connected
adrv9002-iio-cli is installed but incompatible version
Use ADRV9002.profile_generator setup

Steps:

Open Profile Generator tab
Check warning message display

Expected result: Warning message indicates CLI version incompatibility

Actual result:

Verify download CLI button visibility

Expected result: Download CLI button is visible and functional

Actual result:

Test action button states

Expected result: UI buttons remain enabled despite compatibility warning

Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 3: CLI Available

UID: TST.ADRV9002.PROFILE_GEN.CLI_AVAILABLE

Description: Verify profile generator behavior when CLI tool is available.

OS: ANY

Preconditions:

Use ADRV9002.profile_generator setup
Ensure adrv9002-iio-cli is installed and in system PATH

Steps:

Open Profile Generator tab
Check CLI availability status display

Expected result: Status shows CLI version and availability

Actual result:

Verify all action buttons are enabled

Expected result: Save Profile, Save Stream, Load to Device buttons are enabled

Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

LTE Configuration Tests

Test 4: LTE Default Configuration

UID: TST.ADRV9002.PROFILE_GEN.LTE_DEFAULT_CONFIG

Description: Test LTE preset configuration application and constraints.

OS: ANY

Preconditions:

Use ADRV9002.profile_generator setup
CLI available Test 3

Steps:

Open Profile Generator tab
Select “LTE” from preset dropdown
Verify radio configuration defaults

Expected result: FDD mode, LVDS interface, 4 lanes, appropriate clock settings

Actual result:

Verify channel configuration constraints

Expected result: Channels enabled with LTE-appropriate bandwidths and sample rates

Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 5: LTE Configuration Modification

UID: TST.ADRV9002.PROFILE_GEN.LTE_CONFIG_MODIFY

Description: Test modification of LTE configuration parameters.

OS: ANY

Preconditions:

Use ADRV9002.profile_generator setup
CLI available Test 3
LTE preset is selected

Steps:

Open Profile Generator tab
Change duplex mode from FDD to TDD
Modify RX1 channel bandwidth

Expected result: Bandwidth changes, sample rate updates accordingly

Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Live Device Configuration Tests

Test 6: Live Device Configuration Read

UID: TST.ADRV9002.PROFILE_GEN.LIVE_DEVICE_READ

Description: Test reading current device configuration into profile generator.

OS: ANY

Preconditions:

Use ADRV9002.profile_generator setup
CLI available Test 3

Steps:

Select “Live Device” from preset dropdown
Verify channel states match device

Expected result: Enabled/disabled channels match device state

Actual result:

Verify frequency and bandwidth settings

Expected result: Values match current device configuration

Actual result:

Check debug info display

Expected result: Debug info shows device-sourced data

Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

File Generation Tests

Test 7: Stream File Generation

UID: TST.ADRV9002.PROFILE_GEN.PROFILE_FILE_GENERATION

Description: Test generation of profile configuration file.

OS: ANY

Preconditions:

Use ADRV9002.profile_generator setup
CLI available Test 3
Valid configuration is set (LTE or custom)

Steps:

Open Profile Generator tab
Configure channels and radio settings
Click “Save Stream to File” button

Expected result: File dialog opens for stream file selection

Actual result:

Specify output file path and save

Expected result: CLI executes successfully, stream file is generated

Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 8: Profile File Generation

UID: TST.ADRV9002.PROFILE_GEN.PROFILE_FILE_GENERATION

Description: Test generation of profile configuration file.

OS: ANY

Preconditions:

Use ADRV9002.profile_generator setup
Test 3 (CLI Available) must pass
Valid configuration is set (LTE or custom)

Steps:

Open Profile Generator tab
Configure channels and radio settings
Click “Save Profile to File” button

Expected result: File dialog opens for profile file selection

Actual result:

Specify output file path and save

Expected result: CLI executes successfully, profile file is generated

Actual result:

Verify generated file contents

Expected result: Profile file contains valid configuration data

Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 9: Load to Device

UID: TST.ADRV9002.PROFILE_GEN.LOAD_TO_DEVICE

Description: Test loading generated profile to connected device.

OS: ANY

Preconditions:

Use ADRV9002.profile_generator setup
CLI available Test 3
Valid configuration is set (LTE or custom)

Steps:

Open Profile Generator tab
Configure channels and radio settings

Expected result: Configuration is valid and complete

Actual result:

Click “Load to Device” button

Expected result: CLI generates profile and stream files

Actual result:

Verify profile loading progress

Expected result: Progress indicators show profile and stream loading steps

Actual result:

Check device configuration after loading

Expected result: Device operates with new configuration, Controls tab reflects changes

Actual result:

Tested OS:

Comments:

Result: PASS/FAIL