AD9084 Test Suite
- Prerequisites:
Scopy v2.1.0 or later with AD9084 plugin installed
AD9084 device connected
Device drivers and firmware are up to date
Reset .ini files to default by pressing Reset button in Preferences
Test 1: Plugin Loads
UID: TST.AD9084.PLUGIN_LOADS
Description: Verify that the AD9084 plugin loads in Scopy and is accessible in the UI.
OS: ANY
- Preconditions:
Scopy is installed
- Steps:
Open Scopy application
- Open AD9084 plugin
Expected result: AD9084 plugin loads and is accessible in the UI
Actual result:
Tested OS:
Comments:
Result: PASS/FAIL
Test 2: Device Detection and Display
UID: TST.AD9084.DEVICE_DETECTION_AND_DISPLAY
Description: Verify that the plugin detects and displays the connected AD9084 device and its status panels.
OS: ANY
- Preconditions:
AD9084 device is connected
- Steps:
- Open AD9084 plugin
Expected result: The plugin detects and displays the AD9084 device and its status panels
Actual result:
Tested OS:
Comments:
Result: PASS/FAIL
Test 3: Channel Configuration
UID: TST.AD9084.CHANNEL_CONFIGURATION
Description: Enable and disable individual channels; verify that channel status and data display update accordingly.
OS: ANY
- Preconditions:
AD9084 device is connected
- Steps:
- Enable a channel
Expected result: Channel is enabled
Actual result:
- Disable the channel
Expected result: Channel is disabled
Actual result:
Tested OS:
Comments:
Result: PASS/FAIL
Test 4: Disable and Enable RX/TX Tabs
UID: TST.AD9084.DISABLE_ENABLE_RX_TX_TABS
Description: Disable then enable RX and TX tabs; verify that tab status and controls update accordingly.
OS: ANY
- Preconditions:
AD9084 device is connected
- Steps:
- Disable RX tab
Expected result: RX tab is disabled and controls are inaccessible
Actual result:
- Disable TX tab
Expected result: TX tab is disabled and controls are inaccessible
Actual result:
- Enable RX tab
Expected result: RX tab is enabled and controls are accessible
Actual result:
- Enable TX tab
Expected result: TX tab is enabled and controls are accessible
Actual result:
Tested OS:
Comments:
Result: PASS/FAIL