AD9371 Advanced Test Suite

Note

User guide: AD9371 user guide

Note

Tester

Test Date

Scopy version

Plugin version (N/A if not applicable)

Comments
Prerequisites:

  • Scopy v2.2.0 or later with AD9371 plugin installed

  • AD9371 device connected

  • Device drivers and firmware are up to date

  • Reset .ini files to default by pressing Reset button in Preferences

Setup Environment

AD9371.device:

  • Connect an AD9371 evaluation board via Ethernet/USB to your PC

  • Ensure AD9371 IIO drivers are properly installed

  • Verify device firmware and driver compatibility

  • Connect to the device in Scopy with AD9371 plugin enabled

AD9371.emulator:

  • Press the add device button and go to emulator

  • Select AD9371 device if available

  • Enable, verify and select all plugins available

  • Connect to the device

AD9371 Advanced Controls Tests

Test 1: Advanced Plugin Loads

UID: TST.AD9371.ADVANCED_PLUGIN_LOADS

RBP: P0

Description: Verify that the AD9371 Advanced plugin loads in Scopy without errors.

OS: ANY

Preconditions:

  • Scopy is installed

Steps:
  1. Open Scopy application and connect to an AD9371 device.

    • Expected result: Scopy launches without errors and the AD9371 package is available.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 2: Clock Settings Section Visible

UID: TST.AD9371.ADVANCED_CLK_SETTINGS_VISIBLE

RBP: P1

Description: Verify that the Clock Settings section is accessible and displays clock-related IIO attributes.

OS: ANY

Preconditions:
Steps:
  1. In the AD9371 Advanced plugin, click the Clock Settings navigation button.

    • Expected result: The Clock Settings panel is displayed in the central area with clock attribute widgets.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 3: Calibrations Section Visible

UID: TST.AD9371.ADVANCED_CALIBRATIONS_VISIBLE

RBP: P1

Description: Verify that the Calibrations section is accessible and displays calibration enable switches.

OS: ANY

Preconditions:
Steps:
  1. In the AD9371 Advanced plugin, click the Calibrations navigation button.

    • Expected result: The Calibrations panel is displayed with TX QEC, TX LO Leakage, TX LO Leakage Ext., TX BB Filter, and (if DPD-capable) DPD, CLGC, VSWR calibration switches.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 4: Advanced Calibration Mask Write

UID: TST.AD9371.ADVANCED_CALIBRATIONS_MASK_WRITE

RBP: P2

Description: Verify that toggling a calibration enable switch in the Advanced Calibrations section is written to the hardware.

OS: ANY

Preconditions:
Steps:
  1. In the Calibrations section, toggle the TX QEC Cal switch on or off.

    • Expected result: The switch changes state in the UI and the new value is written to the hardware calibrate_tx_qec_en attribute.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 5: TX Settings Section Visible

UID: TST.AD9371.ADVANCED_TX_SETTINGS_VISIBLE

RBP: P1

Description: Verify that the TX Settings section is accessible and displays TX-specific IIO attributes.

OS: ANY

Preconditions:
Steps:
  1. In the AD9371 Advanced plugin, click the TX Settings navigation button.

    • Expected result: The TX Settings panel is displayed in the central area with TX attribute widgets.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 6: RX Settings Section Visible

UID: TST.AD9371.ADVANCED_RX_SETTINGS_VISIBLE

RBP: P1

Description: Verify that the RX Settings section is accessible and displays RX-specific IIO attributes.

OS: ANY

Preconditions:
Steps:
  1. In the AD9371 Advanced plugin, click the RX Settings navigation button.

    • Expected result: The RX Settings panel is displayed in the central area with RX attribute widgets.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 7: Observation Settings Section Visible

UID: TST.AD9371.ADVANCED_OBS_SETTINGS_VISIBLE

RBP: P1

Description: Verify that the Observation RX Settings section is accessible and displays ORx-specific attributes.

OS: ANY

Preconditions:
Steps:
  1. In the AD9371 Advanced plugin, click the Obs Settings navigation button.

    • Expected result: The Observation Settings panel is displayed with ORx attribute widgets.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 8: Gain Setup Section Visible

UID: TST.AD9371.ADVANCED_GAIN_SETUP_VISIBLE

RBP: P2

Description: Verify that the Gain Setup section is accessible and displays gain table configuration attributes.

OS: ANY

Preconditions:
Steps:
  1. In the AD9371 Advanced plugin, click the Gain Setup navigation button.

    • Expected result: The Gain Setup panel is displayed in the central area with gain configuration widgets.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 9: AGC Setup Section Visible

UID: TST.AD9371.ADVANCED_AGC_SETUP_VISIBLE

RBP: P2

Description: Verify that the AGC Setup section is accessible and displays AGC configuration attributes.

OS: ANY

Preconditions:
Steps:
  1. In the AD9371 Advanced plugin, click the AGC Setup navigation button.

    • Expected result: The AGC Setup panel is displayed in the central area with AGC attribute widgets.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 10: ARM GPIO Section Visible

UID: TST.AD9371.ADVANCED_ARM_GPIO_VISIBLE

RBP: P2

Description: Verify that the ARM GPIO section is accessible and displays ARM GPIO pin configuration attributes.

OS: ANY

Preconditions:
Steps:
  1. In the AD9371 Advanced plugin, click the ARM GPIO navigation button.

    • Expected result: The ARM GPIO panel is displayed in the central area with ARM GPIO attribute widgets.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 11: GPIO Section Visible

UID: TST.AD9371.ADVANCED_GPIO_VISIBLE

RBP: P2

Description: Verify that the GPIO section is accessible and displays GPIO pin attributes.

OS: ANY

Preconditions:
Steps:
  1. In the AD9371 Advanced plugin, click the GPIO navigation button.

    • Expected result: The GPIO panel is displayed in the central area with GPIO attribute widgets.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 12: AUX DAC Section Visible

UID: TST.AD9371.ADVANCED_AUX_DAC_VISIBLE

RBP: P2

Description: Verify that the AUX DAC section is accessible and displays auxiliary DAC configuration attributes.

OS: ANY

Preconditions:
Steps:
  1. In the AD9371 Advanced plugin, click the AUX DAC navigation button.

    • Expected result: The AUX DAC panel is displayed in the central area with DAC attribute widgets.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 13: JESD Framer Section Visible

UID: TST.AD9371.ADVANCED_JESD_FRAMER_VISIBLE

RBP: P2

Description: Verify that the JESD Framer section is accessible and displays JESD framer configuration attributes.

OS: ANY

Preconditions:
Steps:
  1. In the AD9371 Advanced plugin, click the JESD Framer navigation button.

    • Expected result: The JESD Framer panel is displayed in the central area with JESD framer attribute widgets.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 14: JESD Deframer Section Visible

UID: TST.AD9371.ADVANCED_JESD_DEFRAMER_VISIBLE

RBP: P2

Description: Verify that the JESD Deframer section is accessible and displays JESD deframer configuration attributes.

OS: ANY

Preconditions:
Steps:
  1. In the AD9371 Advanced plugin, click the JESD Deframer navigation button.

    • Expected result: The JESD Deframer panel is displayed in the central area with JESD deframer attribute widgets.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 15: BIST Section Visible

UID: TST.AD9371.ADVANCED_BIST_VISIBLE

RBP: P2

Description: Verify that the BIST (Built-In Self Test) section is accessible and displays BIST controls.

OS: ANY

Preconditions:
Steps:
  1. In the AD9371 Advanced plugin, click the BIST navigation button.

    • Expected result: The BIST panel is displayed in the central area with BIST attribute widgets and controls.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 16: DPD Settings Section Visible

UID: TST.AD9371.ADVANCED_DPD_SETTINGS_VISIBLE

RBP: P3

Description: Verify that the DPD Settings section is accessible on DPD-capable hardware and displays DPD attributes.

OS: ANY

Preconditions:

  • Use AD9371.device setup

  • AD9371 device must support DPD (dpd_tracking_en attribute present on TX channel)

Steps:
  1. In the AD9371 Advanced plugin, click the DPD Settings navigation button.

    • Expected result: The DPD Settings panel is displayed in the central area with DPD tracking, actuator, and status attribute widgets.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 17: CLGC Settings Section Visible

UID: TST.AD9371.ADVANCED_CLGC_SETTINGS_VISIBLE

RBP: P3

Description: Verify that the CLGC Settings section is accessible on DPD-capable hardware and displays CLGC attributes.

OS: ANY

Preconditions:
Steps:
  1. In the AD9371 Advanced plugin, click the CLGC Settings navigation button.

    • Expected result: The CLGC Settings panel is displayed in the central area with CLGC tracking, gain, and status attribute widgets.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 18: VSWR Settings Section Visible

UID: TST.AD9371.ADVANCED_VSWR_SETTINGS_VISIBLE

RBP: P3

Description: Verify that the VSWR Settings section is accessible on DPD-capable hardware and displays VSWR attributes.

OS: ANY

Preconditions:
Steps:
  1. In the AD9371 Advanced plugin, click the VSWR Settings navigation button.

    • Expected result: The VSWR Settings panel is displayed in the central area with VSWR tracking, forward/reflected gain, and status attribute widgets.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL

Test 19: Advanced Refresh Button Updates Values

UID: TST.AD9371.ADVANCED_REFRESH_BUTTON

RBP: P1

Description: Verify that clicking the Refresh button in the Advanced plugin reads all widget values from hardware and updates the UI.

OS: ANY

Preconditions:
Steps:
  1. Navigate to any section in the AD9371 Advanced plugin (e.g., Clock Settings).

    • Expected result: The section displays IIO attribute values read from hardware.

    • Actual result:

Tested OS:

Comments:

Result: PASS/FAIL