AD936x Test Suite
- Prerequisites:
Scopy v2.1.0 or later with AD936x plugin installed
AD936x device connected
Device drivers and firmware are up to date
Reset .ini files to default by pressing Reset button in Preferences
Test 1: Plugin Loads
UID: TST.AD936X.PLUGIN_LOADS
Description: Verify that the AD936x plugin loads in Scopy.
OS: ANY
- Preconditions:
Scopy is installed
- Steps:
- Open Scopy application
Expected result: Scopy launches without errors
Actual result:
Tested OS:
Comments:
Result: PASS/FAIL
Test 2: Device Detection and Display
UID: TST.AD936X.DEVICE_DETECTION_AND_DISPLAY
Description: Verify that the AD936x plugin detects and displays the connected AD936x device and its status panels.
OS: ANY
- Preconditions:
AD936x device is connected
- Steps:
- Open AD936x plugin
Expected result: The plugin detects and displays the AD936x device and its status panels
Actual result:
Tested OS:
Comments:
Result: PASS/FAIL
Test 3: Change and Validate Device Global Settings
UID: TST.AD936X.CHANGE_VALIDATE_GLOBAL_SETTINGS
Description: Change ENSM mode, calibration, and rate governor; verify changes are applied and reflected in hardware.
OS: ANY
- Preconditions:
AD936x device is connected
- Steps:
- Change ENSM mode (FDD/TDD).
Expected result: Mode changes and is reflected in the UI and hardware.
Actual result:
Tested OS:
Comments:
Result: PASS/FAIL
Test 4: RX and TX Chain Configuration
UID: TST.AD936X.RX_TX_CHAIN_CONFIG
Description: Change RX/TX bandwidth, sampling rate, LO frequency, and verify correct application.
OS: ANY
- Preconditions:
AD936x device is connected
- Steps:
- Change RX bandwidth and sampling rate.
Expected result: New values are applied and reflected in the UI and hardware.
Actual result:
Tested OS:
Comments:
Result: PASS/FAIL
Test 5: Advanced Plugin Detection and Display
UID: TST.AD936X_ADVANCED.PLUGIN_DETECTION_AND_DISPLAY
Description: Verify that the AD936x Advanced plugin detects and displays the connected AD936x device and its advanced configuration panels.
OS: ANY
- Preconditions:
AD936x device is connected
- Steps:
- Open AD936x Advanced plugin
Expected result: The plugin detects and displays the AD936x device and its advanced configuration panels
Actual result:
Tested OS:
Comments:
Result: PASS/FAIL