ADALM2000

Contents

• Digital IO - Test Suite
  • Setup environment:
  • Test 1 - Check individual digital pin state
  • Test 2 - Checking grouped digital pin states
  • Test 3 - Checking individual digital pin state voltmeter and power supply
• General Settings - Test Case
  • Setup environment:
  • Test 1: M2K Connection and Calibration
  • Test 2: Save and Load Profile
  • Test 3: Preferences
• Logic Analyzer - Test Suite
  • Setup environment:
  • Test 1 - Channel Trigger Function
  • Test 2 - External Channel Trigger Function
  • Test 3 - Oscilloscope Source External Trigger
  • Test 4 - Trigger Modes
  • Test 5 - Clock signal measurement accuracy
  • Test 6 - Parallel Decoder
  • Test 7 - SPI decoder
  • Test 8 - UART decoder
  • Test 9 - PWM Decoder
  • Test 10 - Channel visual representation
  • Test 11 - Export Functionality
  • Test 12 - Print Plot
  • Test 13 - Decoder Table
• Network Analyzer - Test Suite
  • Setup environment:
  • Test 1 - Low Pass Filter CH1 340Hz
  • Test 2 - Low Pass Filter CH2 340Hz
  • Test 3 - Low Pass Filter CH1 1.59MHz
  • Test 4 - High Pass Filter CH1 340Hz
  • Test 5 - Band Pass Filter CH1
  • Test 6 - Band Stop Filter CH1
  • Test 7 - Print Plot
  • Test 8 - Buffer Previewer
• Oscilloscope - Test Suite
  • Setup environment:
  • Test 1 - Time base and Volts/div Knobs
  • Test 2 - Position Knob
  • Test 3 - Constant Signal Check
  • Test 4 - Sine Wave Signal Check
  • Test 5 - Square Wave Signal Check
  • Test 6 - Triangle Wave Signal Check
  • Test 7 - Rising/Falling Ramp Sawtooth Wave
  • Test 8 - Cursor Reading Check
  • Test 9 - Trigger Function Check
  • Test 10 - Math Channel Operations
  • Test 11 - FFT Function
  • Test 12 - XY Function
  • Test 13 - Export feature
  • Test 14 - Software AC coupling
  • Test 15 - Probe Attenuation
  • Test 16 - External Trigger
  • Test 17 - Autoset
  • Test 18 - Print Plot
  • Test 19 - Curve style
  • Test 20 - Gating
  • Test 21 - Histogram
  • Test 22 - ADC Digital Filters
• Pattern Generator - Test Suite
  • Setup environment:
  • Test 1: Individual Channel Operation
  • Test 2: Group Channel Operation
  • Test 3: Simultaneous Group and Individual Channels Operation
  • Test 4: Other Features
• Power Supply - Test Suite
  • Setup environment:
  • Test 1 - Check positive voltage output
  • Test 2 - Check negative voltage output
  • Test 3 - Check fine tuning
  • Test 4 - Check Tracking mode
• Spectrum Analyzer - Test Suite
  • Setup environment:
  • Test 1: Channel 1 Operation
  • Test 2: Channel 2 Operation
  • Test 3: Channel 1 and 2 Operation
  • Test 4: Additional Features
• Signal Generator - Test Suite
  • Setup environment:
  • Test 1: Channel 1 Operation
  • Test 2: Channel 2 Operation
  • Test 3: Channel 1 and Channel 2 Operation
  • Test 4: Additional Features
• Voltmeter - Test Suite
  • Setup environment:
  • Test 1: Channel 1 Operation
  • Test 2: Channel 2 Operation
  • Test 3: Channel 1 and Channel 2 Operation
  • Test 4: Additional Features