ADTF3175 NVM Contents

The module NVM follows the Serial Flash Discoverable Parameters (SFDP) standard. The flash consists of a linked list.

NVM ChunkType

The table below shows the structures that will come with a calibrated ADTF3175 module.

Chunk Type	Component	Descriptions
0x3D	NVM Header	Must always start at address 0x0
0x01	CCB	Imager Calibration content
0x56	Imager Factory Firmware	Reserved space for Imager Factory Firmware
0x57	Imager Current Firmware	Reserved space for Imager Current Firmware
0x58	Imager Upgrade Firmware	Reserved space for Imager Upgrade Firmware
0x53	ADSD3500 Factory Firmware	Reserved space for ADSD3500 Factory Firmware
0x54	ADSD3500 Current Firmware	Reserved space for ADSD3500 Current Firmware
0x55	ADSD3500 Upgrade Firmware	Reserved space for ADSD3500 Upgrade Firmware
0x52	ADSD3500 Init Firmware	ADSD3500 boot up firmware
0x50	Capabilities Structure
0x51	Debug Structure

Each chunk type has a header with the following details. The header is typically followed by chunk data + a 4 byte CRC.

chunkID	Signature for each header type, always 0xAD
chunkType	ID for chunk type
major version	Major version number
minor version	Minor version number
headerSizeBytes	Header Size, always 20
chunkSizeBytes	Size of chunk data
nextChunkHeader	Address of next chunk header
chunkHeaderCRC	CRC of previous 16 bytes

The NVM header always starts at address 0x0.