AD9144

Block diagram of AD9144

EVAL-AD9144

• AD9144 Evaluation Boards
  • Files included in the AD9144 Update:
  • Data Pattern Generator
• AD9144-EBZ Evaluation Board Quick Start Guide Using ACE (Analysis | Control | Evaluate) Software
  • Getting Started with the AD9144-EBZ Evaluation Board and Software
    • What’s in the Box
    • Recommended Equipment List
  • Introduction
  • AD9144 Evaluation Software
  • Hardware Setup
    • Single-Tone Demonstration
      • Single Tone Demo Hardware and Software Start Up Procedure:
• EVALUATING THE AD9144 DIGITAL-TO-ANALOG CONVERTER
  • Preface
  • Typical Setup
  • Helpful Files/Links
  • Software Needed
  • Hardware Needed
  • Quick Start Guide
• AD9144-ADRF6720-EBZ Evaluation Board Quick Start Guide
  • Getting Started with the AD9144-ADRF6720-EBZ Evaluation Board and Software
    • What’s in the Box
    • Recommended Equipment List
  • Introduction
  • AD9144 Evaluation Software
  • Hardware Setup
  • Getting Started
    • Initial Set-Up
    • Single-Tone Test with DAC PLL used
      • Configure the DPG Downloader Vector Software
      • Configure the SPI Software
    • Single-Tone Test with NCO used
    • Note
• AD9144-EBZ Evaluation Board Quick Start Guide
  • Getting Started with the AD9144-EBZ Evaluation Board and Software
    • What’s in the Box
    • Recommended Equipment List
  • Introduction
  • AD9144 Evaluation Software
  • Hardware Setup
  • Getting Started
    • Initial Set-Up
    • Single-Tone Test using DAC PLL==== These settings configure the AD9144 to output a sine wave using the DPG3 and allow the user to view the single-tone performance at the DAC output, under the condition: Fdata
    • Configure DPG Vector Software
      • Configuring SPI
      • ConfSingle Tone using the NCO
    • Note
• AD9144-FMC-EBZ Evaluation Board Quick Start Guide
  • Getting Started with the AD9144-FMC-EBZ Evaluation Board and Software
    • What’s in the Box
    • Recommended Equipment List
  • Introduction
  • AD9144 Evaluation Software
  • Hardware Setup
  • Getting Started
    • Initial Set-Up
    • Single-Tone Demonstration==== These settings configure the AD9144 to output a sine wave using the DPG3 and allow the user to view the single-tone performance at the DAC output, under the condition: Fdata
      • Single Tone Demo Hardware and Software Start Up Procedure: