Introduction

The AD-FMCDAQ3-EBZ module is comprised of the AD9680 dual, 14-bit, 1.25 GSPS, JESD204B ADC, the AD9152 dual, 16-bit, 2.5 GSPS, JESD204B DAC, the AD9528 clock, and power management components. It is clocked by an internally generated carrier platform via the FMC connector, comprising a completely self contained data acquisition and signal synthesis prototyping platform. In an FMC footprint (84 mm × 69 mm), the module’s combination of wideband data conversion, clocking, and power closely approximates real-world hardware and software for system prototyping and design, with no compromise in signal chain performance. For additional information or to purchase the AD-FMCDAQ3-EBZ, please visit: AD-FMCDAQ3-EBZ

Features

  • Includes schematics, layout, BOM, Gerber files, HDL, Linux® drivers, IIO Oscilloscope, VisualANALOG,…

  • FMC-compatible form factor

  • Powered from single FMC connector

  • Provides two channels of ADC and two channels of DAC with full synchronization capabilities

AD9680-1250 ADC

  • JESD204B (subclass 1) 4-lane coded serial digital outputs

  • SFDR: 80 dBc at 1.0 GHz AIN, 1.0 GSPS

  • Noise density: –154 dBFS/Hz @ 1.0 GSPS

  • 2 GHz of usable analog input full power bandwidth

  • Two integrated DDCs per channel

AD9152 DAC

  • JESD204B (subclass 1) coded serial digital outputs

  • Supports complex signal bandwidths up to 800 MHz

  • 6-carrier GSM IMD = 75 dBc at 75 MHz IF

  • SFDR = 85 dBc (BW = 300 MHz) at DC IF

  • Selectable 2×, 4×, 8× interpolation filters

Applications

  • Electronic test and measurement equipment

  • General-purpose software radios

  • Radar systems

  • Ultra wideband satellite receivers

  • Signals intelligence (SIGINT)

  • Point to point communication systems

  • DOCSIS 3.0 CMTS and HFC networks

  • Multiple input/multiple output (MIMO) radios

  • Automated test equipment