Quickstart

The Quick start guides provide simple step by step instructions on how to do an initial system setup for the EVAL-CN0577-FMCZ board on various FPGA development boards.

FPGA-based evaluation

Use these guides when evaluating with an FPGA carrier board. They cover bitstream programming and Linux boot.

• On ZedBoard
  • Using Linux as software
    • Necessary files
    • Required Software
    • Required Hardware
    • Testing
      • Creating the setup with Audio Precision
      • Creating the setup with ADALM2000
      • Boot messages
      • Useful commands for the serial terminal

Supported carriers

The EVAL-CN0577-FMCZ is, by definition, a “FPGA mezzanine card” (FMC); that means it needs a carrier to plug into.

The carriers we support are:

FPGA board	EVAL-CN0577-FMCZ
ZedBoard	FMC LPC

Supported environments

The supported OS are:

FPGA board	HDL	Linux software	No-OS software
ZedBoard	Yes	Yes	No

Hardware setup

The EVAL-CN0577-FMCZ board connects to the FMC LPC connector on the ZedBoard. The carrier setup requires power, UART (115200), Ethernet connections and HDMI (if available).

ZED + EVAL-CN0577-FMCZ

Go to the setup guide.